Citations (44)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
G. Li, M. Gao, C. Chen, C. Zhang & X. Y. Zeng. (2014) Characterisation comparison of laser and laser–arc hybrid welding of Invar 36 alloy. Science and Technology of Welding and Joining 19:1, pages 30-37.
Read now
Read now
M Yu, F Y Meng, C Liang & J An. (2013) Method for evaluating yield strength of laser weldments of maraging steels using hardness test. Materials Science and Technology 29:11, pages 1317-1323.
Read now
Read now
E Assuncao, S Ganguly, D Yapp, S Williams & A Paradowska. (2011) Characterisation of residual stress state in laser welded low carbon mild steel plates produced in keyhole and conduction mode. Science and Technology of Welding and Joining 16:3, pages 239-243.
Read now
Read now
Z. H. Yu, H. G. Yan, S. J. Chen, J. H. Chen & P. L. Zeng. (2010) Method for welding highly crack susceptible magnesium alloy ZK60. Science and Technology of Welding and Joining 15:5, pages 354-360.
Read now
Read now
Articles from other publishers (40)
Muhammad Shehryar Khan, Maryam Soleimani, Abdelbaset R.H. Midawi, Isiaka Aderibigbe, Y. Norman Zhou & Elliot Biro. (2023) A review on heat affected zone softening of dual-phase steels during laser welding. Journal of Manufacturing Processes 102, pages 663-684.
Crossref
Crossref
Zhen Li, Wei Zhao, Hui Zhang, Guangchun Xiao & Kedong Yu. (2023) Microstructure and corrosion resistance of fusion zone in Ti-6Al-4V alloy welded using pulsed- and continuous-wave lasers. Corrosion Science 220, pages 111269.
Crossref
Crossref
Mustafa Umar, M. Mohammed Asif & Paulraj Sathiya. (2022) Creep and Corrosion Characteristics of Laser Welded AA5083 Al–Mg alloy. Lasers in Manufacturing and Materials Processing 9:3, pages 257-276.
Crossref
Crossref
Maamar Hakem, Stéphane Mathieu, Brahim Belkessa, Mustapha Djama, Naima Ouali & Billel Cheniti. (2022) Effect of microstructure and intermetallic precipitates on the electrochemical behavior of dissimilar AA6061-T6/ER5183/AA5086-H32 aluminum TIG weld. The International Journal of Advanced Manufacturing Technology 121:9-10, pages 7005-7018.
Crossref
Crossref
M. Shehryar Khan, Sarim Ali, Daniel Westerbaan, Walter Duley, Elliot Biro & Y. Norman Zhou. (2022) The effect of laser impingement angle on the optimization of melt pool geometry to improve process stability during high-speed laser welding of thin-gauge automotive steels. Journal of Manufacturing Processes 78, pages 242-253.
Crossref
Crossref
Mariane Chludzinski, Rafael Eugenio dos Santos, Cristina Churiaque, Marta Ortega-Iguña & Jose Maria Sánchez-Amaya. (2022) Effect of process parameters on pulsed laser welding of AA5083 alloy using response surface methodology and pulse shape variation. The International Journal of Advanced Manufacturing Technology 120:7-8, pages 4635-4646.
Crossref
Crossref
Mikel Madarieta, Edgar Irazu, Iker Garmendia, Jon Flores & Carlos Soriano. (2022) Geometrical study of 5356 aluminium alloy by means of a concentric wire laser metal deposition. Procedia CIRP 113, pages 361-366.
Crossref
Crossref
Pradyumn Kumar Arya, Vivek Kumar, Dan Sathiaraj, I. A. Palani & Neelesh Kumar Jain. 2022. Recent Advances in Manufacturing Processes and Systems. Recent Advances in Manufacturing Processes and Systems
681
688
.
Mustafa Umar & Sathiya Paulraj. (2020) Thermography analysis and porosity formation during laser beam welding of AA5083-H111 aluminum alloy. Journal of Thermal Analysis and Calorimetry 146:4, pages 1551-1559.
Crossref
Crossref
T. Patterson, J. Hochanadel, S. Sutton, B. Panton & J. Lippold. (2021) A review of high energy density beam processes for welding and additive manufacturing applications. Welding in the World 65:7, pages 1235-1306.
Crossref
Crossref
Ameth Faye, Yannick Balcaen, Loic Lacroix & Joel Alexis. (2021) Effects of welding parameters on the microstructure and mechanical properties of the AA6061 aluminium alloy joined by a Yb: YAG laser beam. Journal of Advanced Joining Processes 3, pages 100047.
Crossref
Crossref
Mariane Chludzinski, Rafael Eugenio dos Santos, Cristina Churiaque, Marta Ortega-Iguña & Jose Maria Sánchez-Amaya. (2021) Pulsed Laser Welding Applied to Metallic Materials—A Material Approach. Metals 11:4, pages 640.
Crossref
Crossref
M. Chludzinski, R.E. dos Santos, C. Churiaque, S.R. Fernández-Vidal, M. Ortega-Iguña & J.M. Sánchez-Amaya. (2021) Pulsed laser butt welding of AISI 1005 steel thin plates. Optics & Laser Technology 134, pages 106583.
Crossref
Crossref
D. Wallerstein, A. Riveiro, J. del Val, R. Comesaña, F. Lusquiños & J. Pou. 2021. Advanced Welding and Deforming. Advanced Welding and Deforming
127
150
.
V. Errico, S.L. Campanelli, A. Angelastro, M. Mazzarisi & G. Casalino. (2020) On the feasibility of AISI 304 stainless steel laser welding with metal powder. Journal of Manufacturing Processes 56, pages 96-105.
Crossref
Crossref
Luca Pellone, Gaurav Inamke, Kyung-Min Hong & Yung C. Shin. (2019) Effects of interface gap and shielding gas on the quality of alloy AA6061 fiber laser lap weldings. Journal of Materials Processing Technology 268, pages 201-212.
Crossref
Crossref
Z. Malekshahi Beiranvand, F. Malek Ghaini, H. Naffakh-moosavy, M. Sheikhi & M. J. Torkamany. (2018) Magnesium Loss in Nd:YAG Pulsed Laser Welding of Aluminum Alloys. Metallurgical and Materials Transactions B 49:5, pages 2896-2905.
Crossref
Crossref
Harinder Singh Grover, Vikas Chawla & Gurbhinder Singh Brar. (2017) Comparing mechanical and corrosion behaviour of TIG & FSW weldments of AA5083-H321. Indian Journal of Science and Technology 10:45, pages 1-10.
Crossref
Crossref
Li Cui, Boxu Chen, Wei Qian, Dingyong He & Li Chen. (2017) Microstructures and Mechanical Properties of Dissimilar Al/Steel Butt Joints Produced by Autogenous Laser Keyhole Welding. Metals 7:11, pages 492.
Crossref
Crossref
Jose Sánchez-Amaya, Timotius Pasang, Margarita Amaya-Vazquez, Juan Lopez-Castro, Cristina Churiaque, Yuan Tao & Francisco Botana Pedemonte. (2017) Microstructure and Mechanical Properties of Ti5553 Butt Welds Performed by LBW under Conduction Regime. Metals 7:7, pages 269.
Crossref
Crossref
Shamini Janasekaran, Mohd Fadzil Jamaludin, Mohd Ridha Muhamad, Farazila Yusof & Mohd Hamdi Abdul Shukor. (2016) Autogenous double-sided T-joint welding on aluminum alloys using low power fiber laser. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 3497-3505.
Crossref
Crossref
S.C. Wu, Y.N. Hu, H. Duan, C. Yu & H.S. Jiao. (2016) On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components. International Journal of Fatigue 91, pages 1-10.
Crossref
Crossref
C. Churiaque, M. R. Amaya-Vazquez, F. J. Botana & J. M. Sánchez-Amaya. (2016) FEM Simulation and Experimental Validation of LBW Under Conduction Regime of Ti6Al4V Alloy. Journal of Materials Engineering and Performance 25:8, pages 3260-3269.
Crossref
Crossref
Ojo Olatunji Oladimeji & Emel Taban. (2016) Trend and innovations in laser beam welding of wrought aluminum alloys. Welding in the World 60:3, pages 415-457.
Crossref
Crossref
P. Leo, G. Renna, G. Casalino & A.G. Olabi. (2015) Effect of power distribution on the weld quality during hybrid laser welding of an Al–Mg alloy. Optics & Laser Technology 73, pages 118-126.
Crossref
Crossref
S. Meco, G. Pardal, S. Ganguly, S. Williams & N. McPherson. (2015) Application of laser in seam welding of dissimilar steel to aluminium joints for thick structural components. Optics and Lasers in Engineering 67, pages 22-30.
Crossref
Crossref
A.W. AlShaer, L. Li & A. Mistry. (2014) The effects of short pulse laser surface cleaning on porosity formation and reduction in laser welding of aluminium alloy for automotive component manufacture. Optics & Laser Technology 64, pages 162-171.
Crossref
Crossref
J. M. Sánchez-Amaya, M. R. Amaya-Vázquez, L. González-Rovira, M. Botana-Galvin & F. J. Botana. (2014) Influence of Surface Pre-treatments on Laser Welding of Ti6Al4V Alloy. Journal of Materials Engineering and Performance 23:5, pages 1568-1575.
Crossref
Crossref
Eurico Assuncao & Stewart Williams. (2014) Effect of material properties on the laser welding mode limits. Journal of Laser Applications 26:1.
Crossref
Crossref
Zouhair Boukha, José María Sánchez-Amaya, Leandro González-Rovira, Eloy Del Rio, Ginesa Blanco & Javier Botana. (2013) Influence of CO2-Ar Mixtures as Shielding Gas on Laser Welding of Al-Mg Alloys. Metallurgical and Materials Transactions A 44:13, pages 5711-5723.
Crossref
Crossref
J.M. Sánchez Amaya, M.R. Amaya-Vázquez & F.J. Botana. 2013. Handbook of Laser Welding Technologies. Handbook of Laser Welding Technologies
215
254
.
L. Quintino & E. Assunção. 2013. Handbook of Laser Welding Technologies. Handbook of Laser Welding Technologies
139
162
.
J.C. Sabol, T. Pasang, W.Z. Misiolek & J.C. Williams. (2012) Localized tensile strain distribution and metallurgy of electron beam welded Ti–5Al–5V–5Mo–3Cr titanium alloys. Journal of Materials Processing Technology 212:11, pages 2380-2385.
Crossref
Crossref
Dongxia Yang, Xiaoyan Li, Dingyong He, Hui Huang & Liang Zhang. (2012) Study on microstructure and mechanical properties of Al–Mg–Mn–Er alloy joints welded by TIG and laser beam. Materials & Design 40, pages 117-123.
Crossref
Crossref
Eurico Assuncao, Stewart Williams & David Yapp. (2012) Interaction time and beam diameter effects on the conduction mode limit. Optics and Lasers in Engineering 50:6, pages 823-828.
Crossref
Crossref
M.R. Amaya-Vazquez, J.M. Sánchez-Amaya, Z. Boukha & F.J. Botana. (2012) Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser. Corrosion Science 56, pages 36-48.
Crossref
Crossref
J. M. Sánchez-Amaya, Z. Boukha, L. González-Rovira, J. Navas, J. Martín-Calleja & F. J. Botana. (2012) Laser texturization to improve absorption and weld penetration of aluminum alloys. Journal of Laser Applications 24:1.
Crossref
Crossref
Eurico Assuncao, Stewart Williams & David Yapp. (2010) Interaction time effects on the transition between conduction and keyhole laser welding. Interaction time effects on the transition between conduction and keyhole laser welding.
M.J. Tobar, M.I. Lamas, A. Yáñez, J.M. Sánchez-Amaya, Z. Boukha & F.J. Botana. (2010) Experimental and simulation studies on laser conduction welding of AA5083 aluminium alloys. Physics Procedia 5, pages 299-308.
Crossref
Crossref
J.M. Sánchez-Amaya, T. Delgado, L. González-Rovira & F.J. Botana. (2009) Laser welding of aluminium alloys 5083 and 6082 under conduction regime. Applied Surface Science 255:23, pages 9512-9521.
Crossref
Crossref