Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 14, 2009 - Issue 8
Journal homepage
170
Views
32
CrossRef citations to date
0
Altmetric
Articles

Ferrite to austenite reverse transformation process in B containing 9%Cr heat resistant steel HAZ

T. ShiraneConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
,
S. TsukamotoConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
,
K. TsuzakiConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
,
Y. AdachiConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
,
T. HanamuraConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
,
M. ShimizuConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
&
F. AbeConsortium of JRCM (The Japan Research and Development Center for Metals), National Institute for Materials Science, Tsukuba, Ibaraki, Japan
 show all
Pages 698-707 | Published online: 04 Dec 2013

Citations (32)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Fujio Abe, Masaaki Tabuchi & Susumu Tsukamoto. (2021) Alloy Design of MARBN for Boiler and Turbine Applications at 650 oC. Materials at High Temperatures 38:5, pages 306-321.
Read now
Akhil Khajuria, Modassir Akhtar, Raman Bedi, Rajneesh Kumar, Mainak Ghosh, C. R. Das & Shaju K. Albert. (2020) Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel. Materials Science and Technology 36:13, pages 1407-1418.
Read now
M. Béreš, H. F. G. Abreu, L. P. M. Santos, C. M. Davies & D. Dye. (2015) Effect of variant transformations in fusion zones of gas metal arc welds. Science and Technology of Welding and Joining 20:4, pages 353-360.
Read now
C. Schlacher, T. Pelzmann, C. Béal, C. Sommitsch, C. Gupta, H. Toda & P. Mayr. (2015) Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography and EBSD. Materials Science and Technology 31:5, pages 516-521.
Read now
C. Schlacher, C. Béal, C. Sommitsch, S. Mitsche & P. Mayr. (2015) Creep and damage investigation of advanced martensitic chromium steel weldments for high temperature applications in thermal power plants. Science and Technology of Welding and Joining 20:1, pages 82-90.
Read now
K M Chalk, P H Shipway & D J Allen. (2011) Austenite formation during heat treatment of P92 power plant steel welds: dependence of A1 temperature on compositional changes. Science and Technology of Welding and Joining 16:7, pages 613-618.
Read now
F. Abe, M. Tabuchi & S. Tsukamoto. (2011) Metallurgy of Type IV fracture in advanced ferritic power plant steels. Materials at High Temperatures 28:2, pages 85-94.
Read now
S S Babu. (2011) In pursuit of optimum welding system design for steels. Science and Technology of Welding and Joining 16:4, pages 306-312.
Read now
F Abe, M Tabuchi & S Tsukamoto. (2009) Mechanisms for boron effect on microstructure and creep strength of ferritic power plant steels. Energy Materials 4:4, pages 166-174.
Read now

Articles from other publishers (23)

R. Rejeesh, Sankalp Biswal, Rahul Mitra, Debalay Chakrabarti, C.R. Das & Shaju K. Albert. (2023) The relative effect of boron and nitrogen concentrations on microstructure and creep resistance of weld simulated heat-affected zones of modified 9Cr-1Mo steel. Materials Science and Engineering: A 881, pages 145417.
Crossref
Rengachari Mythili, Ravi Kirana, Loushambam Herojit Singh, Ramanujam Govindaraj, Anil K. Sinha, Manvendra N. Singh, Saibaba Saroja, Muraleedharan Vijayalakshmi & Sudip K. Deb. (2022) Identification of Retained Austenite in 9Cr-1.4W-0.06Ta-0.12C Reduced Activation Ferritic Martensitic Steel. Symmetry 14:2, pages 196.
Crossref
Tomoaki Hamaguchi, Shinnosuke Kurihara, Hiroyuki Hirata & Hirokazu Okada. (2022) Creep rupture properties and microstructures of 9Cr–3Co–3W-Nd-B steel welded joints. Materials Science and Engineering: A 831, pages 142231.
Crossref
Yu Zhang, Zhipeng Cai, Chaoyu Han, Xin Huo, Manjie Fan, Kejian Li & Jiluan Pan. (2021) Macrosegregation induced interface structure and its effect on creep failure in dissimilar metal welds between Ni-based alloy and 10% Cr martensitic steel. Materials Science and Engineering: A 824, pages 141847.
Crossref
D.P. Yang, P.J. Du, D. Wu & H.L. Yi. (2021) The microstructure evolution and tensile properties of medium-Mn steel heat-treated by a two-step annealing process. Journal of Materials Science & Technology 75, pages 205-215.
Crossref
R. Rejeesh, Ankita Bhattacharya, Chandan Haldar, Rahul Mitra, Debalay Chakrabarti, C.R. Das, Shaju K. Albert & Arun Kumar Bhaduri. (2021) Relative effect of B and N concentrations on the microstructural stability and mechanical properties of modified 9Cr-1Mo steel. Journal of Alloys and Compounds 867, pages 158971.
Crossref
Tomoaki HAMAGUCHI. (2021) Creep Strength and Microstructure of Heat-affected Zone on 9Cr-3W-3Co-Nd-B Heat-resistant Steel9Cr-3W-3Co-Nd-B鋼溶接熱影響部のクリープ強度と金属組織. JOURNAL OF THE JAPAN WELDING SOCIETY 90:6, pages 436-440.
Crossref
Li, Li, Cai & Pan. (2019) A Review of Austenite Memory Effect in HAZ of B Containing 9% Cr Martensitic Heat Resistant Steel. Metals 9:11, pages 1233.
Crossref
J. Guo, X. Xu, Mark A.E. Jepson & R.C. Thomson. (2019) Influence of weld thermal cycle and post weld heat treatment on the microstructure of MarBN steel. International Journal of Pressure Vessels and Piping 174, pages 13-24.
Crossref
Thomas Garcin, Keiji Ueda & Matthias Militzer. (2016) Reverse Austenite Transformation and Grain Growth in a Low-Carbon Steel. Metallurgical and Materials Transactions A 48:2, pages 796-808.
Crossref
F. Abe. 2017. Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants. Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants 323 374 .
Fujio Abe. (2016) Progress in Creep-Resistant Steels for High Efficiency Coal-Fired Power Plants. Journal of Pressure Vessel Technology 138:4.
Crossref
Sho KANO, Akira OBA, Huilong YANG, Yoshitaka MATSUKAWA, Yuhki SATOH, Hisashi SERIZAWA, Hideo SAKASEGAWA, Hiroyasu TANIGAWA & Hiroaki ABE. (2016) Experimental assessment of temperature distribution in heat affected zone (HAZ) in dissimilar joint between 8Cr-2W steel and SUS316L fabricated by 4 kW fiber laser welding. Mechanical Engineering Letters 2:0, pages 15-00481-15-00481.
Crossref
Liang Chen, Yun Han, Bin Zhou & Jie Gong. (2015) Analysis of retarding effect on α to γ transformation in Fe–C alloy by addition of dispersed particles. Progress in Natural Science: Materials International 25:3, pages 236-241.
Crossref
Steve. W. Ooi, Amir. A Shirzadi & Jianguo Yang. (2015) Austenite Memory and Variant Selection in a Novel Martensitic Welding Alloy. Materials Today: Proceedings 2, pages S325-S331.
Crossref
Masaaki Tabuchi, Hiromichi Hongo & Fujio Abe. (2014) Creep Strength of Dissimilar Welded Joints Using High B-9Cr Steel for Advanced USC Boiler. Metallurgical and Materials Transactions A 45:11, pages 5068-5075.
Crossref
Yuan Liu, Susumu Tsukamoto, Kota Sawada & Fujio Abe. (2013) Role of Boundary Strengthening on Prevention of Type IV Failure in High Cr Ferritic Heat-Resistant Steels. Metallurgical and Materials Transactions A 45:3, pages 1306-1314.
Crossref
Y. Liu, S. Tsukamoto, T. Shirane & F. Abe. (2013) Formation Mechanism of Type IV Failure in High Cr Ferritic Heat-Resistant Steel-Welded Joint. Metallurgical and Materials Transactions A 44:10, pages 4626-4633.
Crossref
C. R. Das, S. K. Albert, A. K. Bhaduri & B. S. Murty. (2013) Effect of Boron Addition and Initial Heat-Treatment Temperature on Microstructure and Mechanical Properties of Modified 9Cr-1Mo Steels Under Different Heat-Treatment Conditions. Metallurgical and Materials Transactions A 44:5, pages 2171-2186.
Crossref
C.R. Das, S.K. Albert, J. Swaminathan, A.K. Bhaduri & B.S. Murty. (2013) Effect of Boron on Creep Behaviour of Inter-Critically Annealed Modified 9Cr-1Mo Steel. Procedia Engineering 55, pages 402-407.
Crossref
Junhak Pak, Dong Woo Suh & H. K. D. H. Bhadeshia. (2012) Displacive Phase Transformation and Surface Effects Associated with Confocal Laser Scanning Microscopy. Metallurgical and Materials Transactions A 43:12, pages 4520-4524.
Crossref
S.S. Babu. 2012. Phase Transformations in Steels. Phase Transformations in Steels 588 633 .
Fujio Abe. Long-Term Stabilization of Creep-Resistant Ferritic Steels for Highly Efficient Ultra-Supercritical Power Plants. Long-Term Stabilization of Creep-Resistant Ferritic Steels for Highly Efficient Ultra-Supercritical Power Plants.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.