Citations (17)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
H E Coules, P Colegrove, L D Cozzolino & S W Wen. (2013) High pressure rolling of low carbon steel weld seams: Part 1 – Effects on mechanical properties and microstructure. Science and Technology of Welding and Joining 18:1, pages 76-83.
Read now
Read now
Articles from other publishers (16)
Hamidreza Rohani Raftar, Antti Ahola, Kalle Lipiäinen & Timo Björk. (2023) Simulation and experiment on residual stress and deflection of cruciform welded joints. Journal of Constructional Steel Research 208, pages 108023.
Crossref
Crossref
Klaas Maximilian Heide, Steffen Heikebrügge, Christian Dänekas, Bernd Breidenstein & Peter Schaumann. (2022) Automated geometry measurement and deep rolling of butt welds. Welding in the World 66:12, pages 2533-2547.
Crossref
Crossref
Nirut Naksuk, Pattarawadee Poolperm, Jiradech Nakngoenthong, Waravut Printrakoon & Rattanapon Yuttawiriya. (2022) Experimental investigation of hot-wire laser deposition for the additive manufacturing of titanium parts. Materials Research Express 9:5, pages 056515.
Crossref
Crossref
Valeriy Gornyakov, Jialuo Ding, Yongle Sun & Stewart Williams. (2022) Understanding and designing post-build rolling for mitigation of residual stress and distortion in wire arc additively manufactured components. Materials & Design 213, pages 110335.
Crossref
Crossref
Tao Zhang, Huigui Li, Hai Gong, Jialuo Ding, Yunxin Wu, Chenglei Diao, Xiaoyong Zhang & Stewart Williams. (2022) Hybrid wire - arc additive manufacture and effect of rolling process on microstructure and tensile properties of Inconel 718. Journal of Materials Processing Technology 299, pages 117361.
Crossref
Crossref
Mato Perić, Sandro Nižetić, Ivica Garašić, Nenad Gubeljak, Tomaž Vuherer & Zdenko Tonković. (2020) Numerical calculation and experimental measurement of temperatures and welding residual stresses in a thick-walled T-joint structure. Journal of Thermal Analysis and Calorimetry 141:1, pages 313-322.
Crossref
Crossref
T.-E. Adams, S. Härtel, A. Hälsig, B. Awiszus & P. Mayr. (2020) WeldForming: a new inline process combination to improve weld seam properties. Welding in the World 64:4, pages 601-610.
Crossref
Crossref
Jianglong Gu, Xiaoshu Wang, Jing Bai, Jialuo Ding, Stewart Williams, Yuchun Zhai & Kun Liu. (2018) Deformation microstructures and strengthening mechanisms for the wire+arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling. Materials Science and Engineering: A 712, pages 292-301.
Crossref
Crossref
Luis D. Cozzolino, Harry E. Coules, Paul A. Colegrove & Shuwen Wen. (2017) Investigation of post-weld rolling methods to reduce residual stress and distortion. Journal of Materials Processing Technology 247, pages 243-256.
Crossref
Crossref
Paul A. Colegrove, Jack Donoghue, Filomeno Martina, Jianglong Gu, Philip Prangnell & Jan Hönnige. (2017) Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components. Scripta Materialia 135, pages 111-118.
Crossref
Crossref
H.E. Coules, G.C.M. Horne, S. Kabra, P. Colegrove & D.J. Smith. (2017) Three-dimensional mapping of the residual stress field in a locally rolled aluminium alloy specimen. Journal of Manufacturing Processes 26, pages 240-251.
Crossref
Crossref
Alexander J.G. Lunt, Enrico Salvati, Lifeng Ma, Igor P. Dolbyna, Tee K. Neo & Alexander M. Korsunsky. (2016) Full in-plane strain tensor analysis using the microscale ring-core FIB milling and DIC approach. Journal of the Mechanics and Physics of Solids 94, pages 47-67.
Crossref
Crossref
Boris SemukhinOleg Nekhoroshkov, Vasilii A. Klimenov & Vasilii Muzalev. (2014) Stress Formation and Stress Relief within Weld-Affected Zone. Advanced Materials Research 1013, pages 182-187.
Crossref
Crossref
Paul A. Colegrove, Filomeno Martina, Matthew J. Roy, Blanka A. Szost, Sofiane Terzi, Stewart W. Williams, Philip J. Withers & David Jarvis. (2014) High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components. Advanced Materials Research 996, pages 694-700.
Crossref
Crossref
Tom Gray, Duncan Camilleri & Norman McPherson. 2014. Control of Welding Distortion in Thin-Plate Fabrication. Control of Welding Distortion in Thin-Plate Fabrication
39
52
.
Daniel F.O. Braga, Harry E. Coules, Thilo Pirling, Valentin Richter-Trummer, Paul Colegrove & Paulo M.S.T. de Castro. (2013) Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction. Journal of Materials Processing Technology 213:12, pages 2323-2328.
Crossref
Crossref