Citations (44)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (13)
Shipin Wu, Dongpo Wang, Zhi Zhang, Chengning Li, Xiuguo Liu, Zhijin Zhou & Xinjie Di. (2019) Effect of dilution on fatigue behaviour of welded joints produced by low-transformation-temperature fillers. Science and Technology of Welding and Joining 24:7, pages 601-608.
Read now
Read now
Jonny Dixneit, Florian Vollert, Arne Kromm, Jens Gibmeier, Andreas Hannemann, Torben Fischer & Thomas Kannengiesser. (2019) In situ analysis of the strain evolution during welding using low transformation temperature filler materials. Science and Technology of Welding and Joining 24:3, pages 243-255.
Read now
Read now
Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Zhi Zhang, Xiao-Qian Liu & Dong-Po Wang. (2018) Comparison of two types of low-transformation-temperature weld metals based on solidification mode. Science and Technology of Welding and Joining 23:3, pages 241-248.
Read now
Read now
R. J. Moat, S. Ooi, A. A. Shirzadi, H. Dai, A. F. Mark, H. K. D. H. Bhadeshia & P. J. Withers. (2018) Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology 34:5, pages 519-528.
Read now
Read now
Ladislav Novotný, Hamilton Ferreira Gomes de Abreu, Jozef Zajac & Miloslav Béreš. (2018) Imperfections generation in finite element models of welding. Science and Technology of Welding and Joining 23:2, pages 148-157.
Read now
Read now
L. Novotný, H. F. G. de Abreu, H. C. de Miranda & M. Béreš. (2016) Simulations in multipass welds using low transformation temperature filler material. Science and Technology of Welding and Joining 21:8, pages 680-687.
Read now
Read now
T. Gurova, S. F. Estefen, A. Leontiev & F. A. L. de Oliveira. (2015) Welding residual stresses: a daily history. Science and Technology of Welding and Joining 20:7, pages 616-621.
Read now
Read now
N. Barnes, T. Joseph & P. F. Mendez. (2015) Issues associated with welding and surfacing of large mobile mining equipment for use in oil sands applications. Science and Technology of Welding and Joining 20:6, pages 483-493.
Read now
Read now
M. Xu, J. Chen, Y. Jin, Y. Li & H. Lu. (2015) Effects of weld metal strength and transformation temperature on welding residual stress. Science and Technology of Welding and Joining 20:3, pages 208-215.
Read now
Read now
L. Y. Xu, Y. F. Wang, H. Y. Jing & Y. D. Han. (2014) Fatigue strength improvement of stainless steel using weld toes dressing with low transformation temperature welding wire. Science and Technology of Welding and Joining 19:8, pages 664-672.
Read now
Read now
T. I. Ramjaun, H. J. Stone, L. Karlsson, M. A. Gharghouri, K. Dalaei, R. J. Moat & H. K. D. H. Bhadeshia. (2014) Surface residual stresses in multipass welds produced using low transformation temperature filler alloys. Science and Technology of Welding and Joining 19:7, pages 623-630.
Read now
Read now
T. I. Ramjaun, H. J. Stone, L. Karlsson, J. Kelleher, S. W. Ooi, K. Dalaei, J. Rebelo Kornmeier & H. K. D. H. Bhadeshia. (2014) Effects of dilution and baseplate strength on stress distributions in multipass welds deposited using low transformation temperature filler alloys. Science and Technology of Welding and Joining 19:6, pages 461-467.
Read now
Read now
S. H. Thomas & S. Liu. (2014) Analysis of low transformation temperature welding (LTTW) consumables – distortion control and evolution of stresses. Science and Technology of Welding and Joining 19:5, pages 392-401.
Read now
Read now
Articles from other publishers (30)
T.M. Kelsy Green, Niyanth Sridharan, Xiang Chen & Kevin G. Field. (2022) Effect of N2- and CO2-containing shielding gases on composition modification and carbonitride precipitation in wire arc additive manufactured grade 91 steel. Additive Manufacturing 56, pages 102854.
Crossref
Crossref
Ali Tabatabaeian, Ahmad Reza Ghasemi, Mahmood M. Shokrieh, Bahareh Marzbanrad, Mohammad Baraheni & Mohammad Fotouhi. (2021) Residual Stress in Engineering Materials: A Review. Advanced Engineering Materials 24:3, pages 2100786.
Crossref
Crossref
Zhongyuan Feng, Ninshu Ma, Seiichiro Tsutsumi & Xinjie Di. (2021) Size effect on residual stress in low transformation temperature welded joints. Marine Structures 78, pages 103001.
Crossref
Crossref
Jaemin Lee, Diego Perrera & Hyun Chung. (2021) Multi-Pass Welding Distortion Analysis Using Layered Shell Elements Based on Inherent Strain. Journal of Marine Science and Engineering 9:6, pages 632.
Crossref
Crossref
Niyanth Sridharan, Jeffrey Bunn, Michael Kottman, Chris M. Fancher, Andrew Payzant, Mark Noakes, Andrzej Nycz, Lonnie Love, Badri Narayanan & S.S. Babu. (2021) Consumable development to tailor residual stress in parts fabricated using directed energy deposition processes. Additive Manufacturing 39, pages 101837.
Crossref
Crossref
Zhongyuan Feng, Ninshu Ma, Seiichiro Tsutsumi & Fenggui Lu. (2021) Investigation of the Residual Stress in a Multi-Pass T-Welded Joint Using Low Transformation Temperature Welding Wire. Materials 14:2, pages 325.
Crossref
Crossref
Ladislav Novotný, Hamilton Ferreira Gomes de Abreu, Miloslav Béreš & Jozef Zajac. Finite element analysis of multipass welding using LTT filler material. Finite element analysis of multipass welding using LTT filler material.
Sachin Bhardwaj, R. M. Chandima Ratnayake & Arvind Keprate. 2021. Proceedings of 1st International Conference on Structural Damage Modelling and Assessment. Proceedings of 1st International Conference on Structural Damage Modelling and Assessment
257
270
.
Christian M Petrie & Niyanth Sridharan. (2020) In situ measurement of phase transformations and residual stress evolution during welding using spatially distributed fiber-optic strain sensors*. Measurement Science and Technology 31:12, pages 125602.
Crossref
Crossref
Zhongyuan Feng, Ninshu Ma, Wangnan Li, Kunio Narasaki & Fenggui Lu. (2020) Efficient analysis of welding thermal conduction using the Newton–Raphson method, implicit method, and their combination. The International Journal of Advanced Manufacturing Technology 111:7-8, pages 1929-1940.
Crossref
Crossref
Jonas Hensel, Arne Kromm, Thomas Nitschke-Pagel, Jonny Dixneit & Klaus Dilger. (2020) Capability of martensitic low transformation temperature welding consumables for increasing the fatigue strength of high strength steel joints. Materials Testing 62:9, pages 891-900.
Crossref
Crossref
Xizhang Chen, Yuanyuan Fang, Senlin Zhao, Yangfan Wang, Namrata Gangil, Arshad Noor Siddiquee & Konovalov Sergey. (2020) Electrochemical Corrosion Behavior of X65 Pipeline Steel Joints Welded by Low Temperature Phase Transformation Electrodes. Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques 14:5, pages 1097-1111.
Crossref
Crossref
Ebrahim Harati, Lars-Erik Svensson & Leif Karlsson. (2020) Comparison of effect of shot-peening with HFMI treatment or use of LTT consumables on fatigue strength of 1300 MPa yield strength steel weldments. Welding in the World 64:7, pages 1237-1244.
Crossref
Crossref
Modassir Akhtar, Akhil Khajuria, Manish Kumar Pandey & Iqbal Ahmed. (2020) Effects of boron modifications on phase nucleation and dissolution temperatures and mechanical properties in 9%Cr steels: sensitivity and stability. Materials Research Express 6:12, pages 1265k1.
Crossref
Crossref
Zhijin Zhou, Xinjie Di, Chengning Li & Shipin Wu. (2019) Effect of restraint stress on martensite transformation in low transformation temperature weld metal. Journal of Materials Science 55:5, pages 2202-2214.
Crossref
Crossref
J.P. Oliveira, T.G. Santos & R.M. Miranda. (2020) Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice. Progress in Materials Science 107, pages 100590.
Crossref
Crossref
Ankush Choudhary, Manoj Kumar & Deepak Rajendra Unune. (2019) Influence of novel water cooled ASAW process on chemical composition and impact toughness of AISI 1023 weld metal. Construction and Building Materials 228, pages 116725.
Crossref
Crossref
Ankush Choudhary, Munish Kumar Gupta & Manoj Kumar. (2018) Investigating the effect of electrode preheating in novel water-cooled advanced submerged arc welding process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:10, pages 2015-2029.
Crossref
Crossref
Modassir Akhtar & Akhil Khajuria. (2019) Probing true creep-hardening interaction in weld simulated heat affected zone of P91 steels. Journal of Manufacturing Processes 46, pages 345-356.
Crossref
Crossref
Huai Wang, Wanchuck Woo, Dong-Kyu Kim, Vyacheslav Em & Soo Yeol Lee. (2018) Effect of chemical dilution and the number of weld layers on residual stresses in a multi-pass low-transformation-temperature weld. Materials & Design 160, pages 384-394.
Crossref
Crossref
Xizhang Chen, Pengfei Wang, Qiuhong Pan & Sanbao Lin. (2018) The Effect of Martensitic Phase Transformation Dilation on Microstructure, Strain–Stress and Mechanical Properties for Welding of High-Strength Steel. Crystals 8:7, pages 293.
Crossref
Crossref
Wenchun Jiang, Wei Chen, Wanchuck Woo, Shan-Tung Tu, Xian-Cheng Zhang & Vyacheslav Em. (2018) Effects of low-temperature transformation and transformation-induced plasticity on weld residual stresses: Numerical study and neutron diffraction measurement. Materials & Design 147, pages 65-79.
Crossref
Crossref
Andrii Mishchenko & Américo Scotti. (2018) Tensões Residuais em Soldagem a Arco: Uma Visão Holística. Soldagem & Inspeção 23:1, pages 93-112.
Crossref
Crossref
Jonny Dixneit, Arne Kromm, Mirko Boin, Robert C. Wimpory, Thomas Kannengiesser, Jens Gibmeier & Dirk Schroepfer. (2017) Residual stresses of LTT welds in large-scale components. Welding in the World 61:6, pages 1089-1097.
Crossref
Crossref
Ebrahim Harati, Lars-Erik Svensson & Leif Karlsson. (2017) Improving fatigue strength of welded 1300 MPa yield strength steel using HFMI treatment or LTT fillers. Engineering Failure Analysis 79, pages 64-74.
Crossref
Crossref
Ebrahim Harati, Leif Karlsson, Lars-Erik Svensson & Kamellia Dalaei. (2017) Applicability of low transformation temperature welding consumables to increase fatigue strength of welded high strength steels. International Journal of Fatigue 97, pages 39-47.
Crossref
Crossref
J. Dixneit, A. Kromm, A. Hannemann, P. Friedersdorf, T. Kannengiesser & J. Gibmeier. (2016) In-situ load analysis in multi-run welding using LTT filler materials. Welding in the World 60:6, pages 1159-1168.
Crossref
Crossref
Xizhang Chen, Shu Yan Zhang, Jingjun Wang & Joe F. Kelleher. (2015) Residual stresses determination in an 8mm Incoloy 800H weld via neutron diffraction. Materials & Design 76, pages 26-31.
Crossref
Crossref
A. Kromm, V. van der Mee, T. Kannengiesser & B. Kalfsbeek. (2014) Properties and weldability of modified low transformation temperature filler wires. Welding in the World 59:3, pages 413-425.
Crossref
Crossref
Xizhang Chen, Yuanyuan Fang, Peng Li, Zhenzhen Yu, Xiaodong Wu & Dongsheng Li. (2015) Microstructure, residual stress and mechanical properties of a high strength steel weld using low transformation temperature welding wires. Materials & Design (1980-2015) 65, pages 1214-1221.
Crossref
Crossref