Citations (28)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Majid Pouranvari, Hamidreza Aghajani & Ali Ghasemi. (2020) Enhanced mechanical properties of martensitic stainless steels resistance spot welds enabled by in situ rapid tempering. Science and Technology of Welding and Joining 25:2, pages 119-126.
Read now
Read now
H. Aghajani & M. Pouranvari. (2019) A pathway to produce strong and tough martensitic stainless steels resistance spot welds. Science and Technology of Welding and Joining 24:3, pages 185-192.
Read now
Read now
Majid Pouranvari. (2018) Understanding the factors controlling the interfacial failure strength of advanced high-strength steel resistance spot welds: hardness vs. fracture toughness. Science and Technology of Welding and Joining 23:6, pages 520-526.
Read now
Read now
M. Pouranvari & E. Safikhani. (2018) Mechanical properties of martensitic stainless steel weld/adhesive hybrid bonds. Science and Technology of Welding and Joining 23:3, pages 227-233.
Read now
Read now
S. Q. Moinuddin, A. Kapil, K. Kohama, A. Sharma, K. Ito & M. Tanaka. (2016) On process–structure–property interconnection in anti-phase synchronised twin-wire GMAW of low carbon steel. Science and Technology of Welding and Joining 21:6, pages 452-459.
Read now
Read now
M. Pouranvari, M. Khorramifar & S. P. H. Marashi. (2016) Ferritic–austenitic stainless steels dissimilar resistance spot welds: metallurgical and failure characteristics. Science and Technology of Welding and Joining 21:6, pages 438-445.
Read now
Read now
A. Moteshakker, I. Danaee, S. Moeinifar & A. Ashrafi. (2016) Hardness and tensile properties of dissimilar welds joints between SAF 2205 and AISI 316L. Science and Technology of Welding and Joining 21:1, pages 1-10.
Read now
Read now
M. Pouranvari, M. Alizadeh-Sh & S. P. H. Marashi. (2015) Welding metallurgy of stainless steels during resistance spot welding Part I: fusion zone. Science and Technology of Welding and Joining 20:6, pages 502-511.
Read now
Read now
M. Alizadeh-Sh, M. Pouranvari & S.P.H. Marashi. (2015) Welding metallurgy of stainless steels during resistance spot welding Part II –heat affected zone and mechanical performance. Science and Technology of Welding and Joining 20:6, pages 512-521.
Read now
Read now
T. Mira-Aguiar, I. Galvão, C. Leitão & D. M. Rodrigues. (2015) Analysis of weld defects in similar and dissimilar resistance seam welding of aluminium, zinc and galvanised steel. Science and Technology of Welding and Joining 20:5, pages 409-417.
Read now
Read now
Articles from other publishers (18)
Hamidreza Aghajani, Ali Ghasemi, Zhilin Peng, Milad Bahrami Balajaddeh & Majid Pouranvari. (2023) Microstructure engineering of fusion zone in resistance spot welding of martensitic stainless steels: The role of Ni interlayer thickness. Materialia 30, pages 101811.
Crossref
Crossref
Mohammad Hossein Amini-Chelak, Reza Miresmaeili, Mohsen Askari-Paykani, Hossein Aliyari & Hamid Reza Shahverdi. (2023) Resistance spot weldability of Fe66Cr16.5Ni14.1Si3.4 advanced high strength steel using D-optimal design of experiment method. Journal of Materials Research and Technology 25, pages 5615-5632.
Crossref
Crossref
İ. Açar, B. Çevik & B. Gülenç. (2023) The effect of shielding gas on weldability of the AISI 420 martensitic stainless steel. Practical Metallography 60:2, pages 108-128.
Crossref
Crossref
S.M. Manladan, Yu Zhang, Zhen Luo & Caimei Wang. (2022) Effect of Ni addition on the microstructural evolution and lap-shear performance of AISI 630 martensitic stainless steel resistance spot welds. Journal of Manufacturing Processes 84, pages 494-507.
Crossref
Crossref
Lei Wang, Hongmei Li, Di Wu, Daqian Sun & Xinge Zhang. (2022) Study on microstructures and fatigue behavior of dissimilar Al/steel resistance spot welded joint. Fatigue & Fracture of Engineering Materials & Structures 45:7, pages 2047-2057.
Crossref
Crossref
Ting Chen, Zhanxiang Ling, Min Wang & Liang Kong. (2022) Effect of post-weld tempering pulse on microstructure and mechanical properties of resistance spot welding of Q&P1180 steel. Materials Science and Engineering: A 831, pages 142164.
Crossref
Crossref
Vivek D. Kalyankar & Gautam P. Chudasama. (2020) Influence of electrode tip diameter on metallurgical and mechanical aspects of spot welded duplex stainless steel. High Temperature Materials and Processes 39:1, pages 317-327.
Crossref
Crossref
Ashkaan Ozlati & Mojtaba Movahedi. (2020) Effect of In Situ Post Weld Heat Treatment on Mechanical Behavior and Austenite–Ferrite Phase Balance of Fe-Cr-Ni/Fe-Cr Stainless Steels Upset Resistance Dissimilar Weld. Journal of Manufacturing Science and Engineering 142:2.
Crossref
Crossref
RuiMing Chen, ChaoQun Zhang, Ming Lou, YongBing Li & Blair E. Carlson. (2020) Effect of Al-Si Coating on Weldability of Press-Hardened Steels. Journal of Materials Engineering and Performance 29:1, pages 626-636.
Crossref
Crossref
Ruiming Chen, Ming Lou, Yongbing Li & Blair E. Carlson. (2019) Improving weldability of Al-Si coated press hardened steel using stepped current pulse schedule. Journal of Manufacturing Processes 48, pages 31-43.
Crossref
Crossref
Hamidreza Aghajani & Majid Pouranvari. (2019) Influence of In Situ Thermal Processing Strategies on the Weldability of Martensitic Stainless Steel Resistance Spot Welds: Effect of Second Pulse Current on the Weld Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A 50:11, pages 5191-5209.
Crossref
Crossref
Heewon Cho, Sangwoo Nam, Insung Hwang, Je Hoon Oh, Munjin Kang & Young-Min Kim. (2019) Fatigue Behaviors of Resistance Spot Welds for 980 MPa Grade TRIP Steel. Metals 9:10, pages 1086.
Crossref
Crossref
Davood Shirmohammadi, Mojtaba Movahedi & Majid Pouranvari. (2017) Resistance spot welding of martensitic stainless steel: Effect of initial base metal microstructure on weld microstructure and mechanical performance. Materials Science and Engineering: A 703, pages 154-161.
Crossref
Crossref
Alejando Tur, Francisco Cordovilla, Ángel García-Beltrán & José L. Ocaña. (2017) Minimization of the thermal material effects on pulsed dynamic laser welding. Journal of Materials Processing Technology 246, pages 13-21.
Crossref
Crossref
S. M. Manladan, F. Yusof, S. Ramesh, M. Fadzil, Z. Luo & S. Ao. (2016) A review on resistance spot welding of aluminum alloys. The International Journal of Advanced Manufacturing Technology 90:1-4, pages 605-634.
Crossref
Crossref
M. Pouranvari. (2017) Fracture toughness of martensitic stainless steel resistance spot welds. Materials Science and Engineering: A 680, pages 97-107.
Crossref
Crossref
Yu Zhang, Yang Li, Zhen Luo, Tao Yuan, Jing Bi, Zheng Ming Wang, Zhi Ping Wang & Yuh Jin Chao. (2016) Feasibility study of dissimilar joining of aluminum alloy 5052 to pure copper via thermo-compensated resistance spot welding. Materials & Design 106, pages 235-246.
Crossref
Crossref
Thibaut Huin, Sylvain Dancette, Damien Fabrègue & Thomas Dupuy. (2016) Investigation of the Failure of Advanced High Strength Steels Heterogeneous Spot Welds. Metals 6:5, pages 111.
Crossref
Crossref