Ao Chen, Yan Ma, Zhou-fu Wang, Hao Liu, Xi-tang Wang, Sen-na Chen, Chen-xin Zhang, Zi-yi Tang, Wei-dong Fu & Wei Cheng. (2023) Preparation of yttrium oxide coating with enhanced thermal shock resistance on refractories used for titanium alloy melting and casting. Journal of Iron and Steel Research International.
Crossref

P. B. Kaliuzhnyi, O. V. Mykhnian, M. M. Voron, A. M. Tymoshenko & O. V. Neima. (2021) Problems of Materials Choice for Ceramic Molds to Obtain Titanium Alloys Shape Castings. Casting Processes 146:4, pages 55-65.
Crossref

R. Sharon Uwanyuze, Janos E. Kanyo, Sarah F. Myrick & Stefan Schafföner. (2021) A review on alpha case formation and modeling of mass transfer during investment casting of titanium alloys. Journal of Alloys and Compounds 865, pages 158558.
Crossref

Liang Wang, Hui Yan, JiLiang Teng, XiaoDong Liu, Xuan Wang, YanQing Su & JingJie Guo. (2020) Effect of hydrogen on interfacial reaction between Ti-6Al-4V alloy melt and graphite mold. Journal of Materials Research and Technology 9:3, pages 6933-6939.
Crossref

Simbarashe Fashu, Mykhaylo Lototskyy, Moegamat Wafeeq Davids, Lydia Pickering, Vladimir Linkov, Sun Tai, Tang Renheng, Xiao Fangming, Pavel V. Fursikov & Boris P. Tarasov. (2020) A review on crucibles for induction melting of titanium alloys. Materials & Design 186, pages 108295.
Crossref

Qiang Yang, Weijun Zhu, Zhongliang Lu, Dichen Li, Zhongrui Wang & Fu Wang. (2019) Rapid Fabrication of High-Performance CaO-Based Integral Ceramic Mould by Stereolithography and Non-Aqueous Gelcasting. Materials 12:6, pages 934.
Crossref

Joaquim Barbosa & Hélder Puga. (2018) Ultrasonic Melt Treatment of Light Alloys. International Journal of Metalcasting 13:1, pages 180-189.
Crossref

M S Varfolomeev, V S Moiseev & G I Shcherbakova. (2018) Perspective ceramic composite materials based on aluminum-yttrium binder composition. Journal of Physics: Conference Series 1121, pages 012032.
Crossref

Peng Bai, Hua-Rui Zhang, Bei-Bei Wan, Chao Ran & Hu Zhang. (2017) Effect of Trace O Element on High-temperature Wettability Between Ni3Al Melt and Y2O3 Ceramic. Acta Metallurgica Sinica (English Letters) 31:5, pages 552-560.
Crossref

Liang Wang, XiaoDong Liu, Ming Wang, WenChuang Liu, Xuan Wang, FuXin Wang, LiangShun Luo, YanQing Su & JingJie Guo. (2018) Effects of hydrogen on the interfacial reaction between Ti 6Al 4V alloy melt and Al2O3 ceramic shell. International Journal of Hydrogen Energy 43:10, pages 5225-5230.
Crossref

Rui L Neto, Teresa P Duarte, Jorge L Alves & Tiago G Barrigana. (2017) The influence of face coat material on reactivity and fluidity of the Ti6Al4V and TiAl alloys during investment casting. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231:1-2, pages 38-48.
Crossref

Wei Chao, Li Mingyang, Chen Guangyao, Wang Hongbin, Lu Xionggang & Li Chonghe. 2016. Shape Casting: 6th International Symposium. Shape Casting: 6th International Symposium 19 25 .

Chao Wei, Mingyang Li, Guangyao Chen, Hongbin Wang, Xionggang Lu & Chonghe Li. 2016. Shape Casting: 6th International Symposium. Shape Casting: 6th International Symposium 19 25 .

N. Sobczak, R.M. Purgert, R. Asthana, J.J. Sobczak, M. Homa, R. Nowak, G. Bruzda, A. Siewiorek & Z. Pirowski. 2015. Developments in Strategic Ceramic Materials. Developments in Strategic Ceramic Materials 307 321 .

C. Yuan, X. Cheng & P.A. Withey. (2015) Investigation into the use of CaZrO3 as a facecoat material in the investment casting of TiAl alloys. Materials Chemistry and Physics 155, pages 205-210.
Crossref

C. Yuan, X. Cheng, G.S. Holt, D. Shevchenko & P.A. Withey. (2015) Investment casting of Ti–46Al–8Nb–1B alloy using moulds with CaO-stabilized zirconia face coat at various mould pre-heat temperatures. Ceramics International 41:3, pages 4129-4139.
Crossref

Xu Cheng, Chen Yuan, Stuart Blackburn & Paul A. Withey. (2015) The Influence of ZrO2 Concentration in an Yttria-Based Face Coat for Investment Casting a Ti-45Al-2Mn-2Nb-0.2TiB Alloy Using a Sessile Drop Method. Metallurgical and Materials Transactions A 46:3, pages 1328-1336.
Crossref

X. Cheng, C. Yuan, S. Blackburn & P.A. Withey. (2014) The study of the influence of binder systems in an Y2O3–ZrO2 facecoat material on the investment casting slurries and shells properties. Journal of the European Ceramic Society 34:12, pages 3061-3068.
Crossref

Chen Yuan, Xu Cheng, Dmytro Shevchenko, Grant Holt & Paul Withey. 2014. Gamma Titanium Aluminide Alloys 2014. Gamma Titanium Aluminide Alloys 2014 45 50 .

Xu Cheng, Chen Yuan, Stuart Blackburn & Paul A. Withey. (2014) A Comparison of the Chemical Inertness of Two Y2O3-Al2O3-ZrO2 and Y2O3-Al2O3 Face Coat Materials Through Sessile Drop and Investment Casting Methods. Metallurgical and Materials Transactions A 45:7, pages 3116-3124.
Crossref

X. Cheng, C. Yuan, N. R. Green & P. A. Withey. (2013) The Study of the Oxidation of a Ti–45Al–2Nb–2Mn–0.2B Alloy in the Investment Casting Using an Yttria Face Coat Mould. Oxidation of Metals 81:1-2, pages 287-298.
Crossref

Xu Cheng, Chen Yuan, Nick Green & Paul Withey. (2012) Evaluation of the Inertness of Investment Casting Molds Using Both Sessile Drop and Centrifugal Casting Methods. Metallurgical and Materials Transactions A 44:2, pages 888-898.
Crossref

Chen Yuan, Dave Compton, Xu Cheng, Nick Green & Paul Withey. (2012) The influence of polymer content and sintering temperature on yttria face-coat moulds for TiAl casting. Journal of the European Ceramic Society 32:16, pages 4041-4049.
Crossref

F. Gomes, H. Puga, Joaquim Barbosa & C. Silva Ribeiro. (2011) Effect of melting pressure and superheating on chemical composition and contamination of yttria-coated ceramic crucible induction melted titanium alloys. Journal of Materials Science 46:14, pages 4922-4936.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Share icon
Back to Top

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Characterisation of metal/mould interface on investment casting of γ-TiAl

Articles from other publishers (24)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature