Branko Bauer, Ivana Mihalic Pokopec, Primož Mrvar & Mitja Petrič. (2022) Influence of Chemical Composition and Cooling Rate on Chunky Graphite Formation in Thick-Walled Ductile Iron Castings. International Journal of Metalcasting 17:3, pages 2050-2061.
Crossref

B. Sułkowski, G. Boczkal, P. Pałka & G. Mrówka-Nowotnik. (2021) Effect of graphite microstructure on their physical parameters and wettability properties. NOVYE OGNEUPORY (NEW REFRACTORIES):8, pages 34-39.
Crossref

B. Sułkowski, G. Boczkal, P. Pałka & G. Mrówka-Nowotnik. (2021) Effect of Graphite Microstructure on their Physical Parameters and Wettability Properties. Refractories and Industrial Ceramics 62:4, pages 458-462.
Crossref

Jon Sertucha, Garikoitz Artola, Urko de La Torre & Jacques Lacaze. (2020) Chunky Graphite in Low and High Silicon Spheroidal Graphite Cast Irons–Occurrence, Control and Effect on Mechanical Properties. Materials 13:23, pages 5402.
Crossref

Branko Bauer, Ivana Mihalic Pokopec, Mitja Petrič & Primož Mrvar. (2020) Effect of Bismuth on Preventing Chunky Graphite in High-Silicon Ductile Iron Castings. International Journal of Metalcasting 14:4, pages 1052-1062.
Crossref

Wolfram Baer. (2019) Chunky Graphite in Ferritic Spheroidal Graphite Cast Iron: Formation, Prevention, Characterization, Impact on Properties: An Overview. International Journal of Metalcasting 14:2, pages 454-488.
Crossref

M. Benedetti, V. Fontanari & D. Lusuardi. (2019) Effect of graphite morphology on the fatigue and fracture resistance of ferritic ductile cast iron. Engineering Fracture Mechanics 206, pages 427-441.
Crossref

Gorka Alonso, Doru Michael Ştefănescu, Esther de La Fuente, Pello Larrañaga & Ramón Suárez. (2018) The Influence of Trace Elements on the Nature of the Nuclei of the Graphite in Ductile Iron. Materials Science Forum 925, pages 78-85.
Crossref

Branko Bauer, Ivana Mihalic Pokopec, Mitja Petrič & Primož Mrvar. (2018) Effect of Si and Ni Addition on Graphite Morphology in Heavy-Section Spheroidal Graphite Iron Parts. Materials Science Forum 925, pages 70-77.
Crossref

Mayerling Martinez Celis, Bernadette Domengès, Eric Hug & Jacques Lacaze. (2018) Analysis of Nuclei in a Heavy-Section Nodular Iron Casting. Materials Science Forum 925, pages 173-180.
Crossref

Rodolfo González-Martínez, Urko de la Torre, Jacques Lacaze & Jon Sertucha. (2018) Effects of high silicon contents on graphite morphology and room temperature mechanical properties of as-cast ferritic ductile cast irons. Part I – Microstructure. Materials Science and Engineering: A 712, pages 794-802.
Crossref

L. Ceschini, Alessandro Morri & Andrea Morri. (2017) Effects of Casting Size on Microstructure and Mechanical Properties of Spheroidal and Compacted Graphite Cast Irons: Experimental Results and Comparison with International Standards. Journal of Materials Engineering and Performance 26:6, pages 2583-2592.
Crossref

Matteo Benedetti, Elisa Torresani, Vigilio Fontanari & Danilo Lusuardi. (2017) Fatigue and Fracture Resistance of Heavy-Section Ferritic Ductile Cast Iron. Metals 7:3, pages 88.
Crossref

. 2017. Cast Iron Science and Technology. Cast Iron Science and Technology 629 644 .

Urko de la Torre, Jacques Lacaze & Jon Sertucha. (2016) Chunky graphite formation in ductile cast irons: effect of silicon, carbon and rare earths. International Journal of Materials Research 107:11, pages 1041-1050.
Crossref

Yangzhen Liu, Jiandong Xing, Yefei Li, Yong Wang, Lei Wang, Baochao Zheng & Dong Tao. (2016) Effect of carbon equivalent on thermal and mechanical properties of compacted graphite cast iron. Journal of Materials Research 31:16, pages 2516-2523.
Crossref

Zoran Glavas, Anita Strkalj & Kresimir Maldini. (2016) Effects of Antimony and Wall Thickness on Graphite Morphology in Ductile Iron Castings. Metallurgical and Materials Transactions B 47:4, pages 2487-2497.
Crossref

P. Ferro, A. Fabrizi, R. Cervo & C. Carollo. (2013) Effect of inoculant containing rare earth metals and bismuth on microstructure and mechanical properties of heavy-section near-eutectic ductile iron castings. Journal of Materials Processing Technology 213:9, pages 1601-1608.
Crossref

Wei Ping Chen, Li Wei Zhou, Wen Hui Li & Zhe Liu. (2013) Thermal Analysis of Solidification Process and Mechanical Properties in Heavy Section Ductile Iron Casting. Advanced Materials Research 750-752, pages 454-461.
Crossref

G. Zarrabeitia & R. Suárez. (2015) An Overview of Research Activities at IK4-Azterlan and Recent Technologies. International Journal of Metalcasting 7:3, pages 51-55.
Crossref

Jon Sertucha, Jacques Lacaze, Susana Armendariz & Peio Larrañaga. (2013) Statistical Analysis of the Influence of Some Trace Elements on Chunky Graphite Formation in Heavy Section Nodular Iron Castings. Metallurgical and Materials Transactions A 44:3, pages 1159-1162.
Crossref

J. Lacaze, I. Asenjo, S. Méndez, J. Sertucha, P. Larrañaga & R. Suárez. (2015) Experimental Evidence for Metallurgical Modification Associated to Chunky Graphite in Heavy-Section Ductile Iron Castings. International Journal of Metalcasting 6:1, pages 35-42.
Crossref

I. Asenjo, P. Larrañaga & J. Sertucha. (2011) Formación de grafito chunky en piezas de pequeño espesor fabricadas utilizando fundición de hierro con grafito esferoidal. Revista de Metalurgia 47:5, pages 402-411.
Crossref

Zhe Liu, Wei Ping Chen & Yu Deng. (2011) Influence of Melt Holding Time on Microstructure and Mechanical Properties of Ductile Iron. Advanced Materials Research 279, pages 16-21.
Crossref

Xiao Gang DiaoZhi Liang Ning, Fu Yang Cao, Shan Zhi Ren & Jian Fei Sun. (2011) Interrelation between Microstructure and Mechanical Properties of Heavy Section Ductile Iron Casting. Advanced Materials Research 189-193, pages 3993-3998.
Crossref

Susana Mendez, David Lopez, Iker Asenjo, Pello Larranaga & Jacques Lacaze. (2011) Improved Analytical Method for Chemical Analysis of Cast Irons Application to Castings with Chunky Graphite. ISIJ International 51:2, pages 242-249.
Crossref

Iker Asenjo, Jacques Lacaze, Peio Larrañaga, Susana Méndez, Jon Sertucha & Ramón Suárez. (2010) Microstructure Investigation of Small-Section Nodular Iron Castings with Chunky Graphite. Key Engineering Materials 457, pages 52-57.
Crossref

Xiao Gang DiaoZhi Liang Ning, Fu Yang Cao, Shan Zhi Ren & Jian Fei Sun. (2010) Graphite Morphology Evolution during Melt Holding of Ductile Iron. Key Engineering Materials 457, pages 31-36.
Crossref

Xiao Gang DiaoZhi Liang Ning, Fu Yang Cao, Shan Zhi Ren & Jian Fei Sun. (2010) Microstructure Evolution of Heavy Section Ductile Iron. Advanced Materials Research 97-101, pages 1020-1023.
Crossref

B. Pustal, B. Hallstedt, W. Schäfer, C. Bartels, E. Subasic, H. Siebert, J. M. Schneider & A. Bührig-Polaczek. (2010) Modeling the Porosity Formation in Austenitic SGI Castings by Using a Physics-Based Material Model. Advanced Engineering Materials 12:3, pages 158-169.
Crossref

Jacques Lacaze, S. Armendariz, Peio Larrañaga, Iker Asenjo, Jon Sertucha & Ramón Suárez. (2010) Effect of Carbon Equivalent on Graphite Formation in Heavy-Section Ductile Iron Parts. Materials Science Forum 636-637, pages 523-530.
Crossref

John Campbell. (2009) A Hypothesis for Cast Iron Microstructures. Metallurgical and Materials Transactions B 40:6, pages 786-801.
Crossref

R. Suárez, J. M. Gutiérrez, A. Loizaga, P. Larrañaga & J. Sertucha. (2009) Influencia de diferentes productos inoculantes sobre el poder de nucleación y la tendencia a la contracción de la fundición con grafito esferoidal. Revista de Metalurgia 45:5, pages 339-350.
Crossref

P. Larrañaga, I. Asenjo, J. Sertucha, R. Suarez, I. Ferrer & J. Lacaze. (2009) Effect of Antimony and Cerium on the Formation of Chunky Graphite during Solidification of Heavy-Section Castings of Near-Eutectic Spheroidal Graphite Irons. Metallurgical and Materials Transactions A 40:3, pages 654-661.
Crossref

Jon Sertucha, Ramón Suárez, Iker Asenjo, Peio Larrañaga, Jacques Lacaze, Iñaki Ferrer & Susana Armendariz. (2009) Thermal Analysis of the Formation of Chunky Graphite during Solidification of Heavy-section Spheroidal Graphite Iron Parts. ISIJ International 49:2, pages 220-228.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Effect of mould inoculation on formation of chunky graphite in heavy section spheroidal graphite cast iron parts

Articles from other publishers (35)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature