Citations (59)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
Abul Hossain & A.S.W. Kurny. (2015) The mechanical properties optimization of Al-6Si-0.5 Mg-2Cu-2Ni alloy by precipitation hardening. Australian Journal of Mechanical Engineering 13:3, pages 187-194.
Read now
Read now
Articles from other publishers (58)
Reece Emery, Orlando R. Rios, Eric A. Lass, Cameron S. Jorgensen, Dustin A. Gilbert, William R. Meier, Michael R. Koehler & Philip D. Rack. (2023) Identification of low coefficient of thermal expansion in Al23Ce4Ni6 via combinatorial sputtering of Al-Ce-Ni-Mn thin films and upscaling to bulk materials. Journal of Alloys and Compounds 968, pages 172220.
Crossref
Crossref
Fatemeh Mollaamin & Majid Monajjemi. (2023) In Silico-DFT Investigation of Nanocluster Alloys of Al-(Mg, Ge, Sn) Coated by Nitrogen Heterocyclic Carbenes as Corrosion Inhibitors. Journal of Cluster Science 34:6, pages 2901-2918.
Crossref
Crossref
Xunming Zhu, Dan Liu, Jian Wang, Candong Chen, Xinxin Li, Li Wang & Mingxu Wang. (2023) Effect of Alloying Elements on the Short-Range Orders and Atomic Diffusion Behavior of Liquid Al−9Si Cast Alloys. Materials 16:20, pages 6768.
Crossref
Crossref
Fellipe Martinez, Carlos dos Santos Junior, Jaderson Leal, Argos Silva, Guilherme Gouveia & José Spinelli. (2023) Effects of Sc Addition and Direct Aging Treatment on Microstructure and Hardness of AlSi10Mg Alloy. Advanced Engineering Materials.
Crossref
Crossref
F. Mollaamin & M. Monajjemi. (2023) Electric and Magnetic Evaluation of Aluminum–Magnesium Nanoalloy Decorated with Germanium Through Heterocyclic Carbenes Adsorption: A Density Functional Theory Study. Russian Journal of Physical Chemistry B 17:3, pages 658-672.
Crossref
Crossref
Fatemeh Mollaamin & Majid Monajjemi. (2023) Corrosion Inhibiting by Some Organic Heterocyclic Inhibitors Through Langmuir Adsorption Mechanism on the Al-X (X = Mg/Ga/Si) Alloy Surface: A Study of Quantum Three-Layer Method of CAM-DFT/ONIOM. Journal of Bio- and Tribo-Corrosion 9:2.
Crossref
Crossref
Fatemeh Mollaamin & Majid Monajjemi. (2023) Application of DFT and TD-DFT on Langmuir Adsorption of Nitrogen and Sulfur Heterocycle Dopants on an Aluminum Surface Decorated with Magnesium and Silicon. Computation 11:6, pages 108.
Crossref
Crossref
Sigurd Wenner, Constantinos Hatzoglou, Eva Anne Mørtsell & Petter Åsholt. (2023) Clustering and Precipitation during Early-Stage Artificial Aging of Al–Si–Mg(–Cu) Foundry Alloys. Metals 13:3, pages 557.
Crossref
Crossref
Huidi Zhang, Bin Chen, Jianfei Hao, Huishu Wu, Ming Chen, Weirong Li, Runxia Li & Biao Wang. (2023) Effects of Cu/Er on Tensile Properties of Cast Al-Si Alloy at Low Temperature. Materials 16:3, pages 902.
Crossref
Crossref
K.A. Cosan, K.O. Gunduz, M. Tarakcı & Y. Gencer. (2022) Plasma electrolytic oxidation of as-cast and heat-treated binary Al-Ni alloys. Surface and Coatings Technology 450, pages 128998.
Crossref
Crossref
Danusa Araújo de Moura, Guilherme Lisboa de Gouveia, Leonardo Fernandes Gomes & José Eduardo Spinelli. (2022) Understanding the effect of Ni content on microstructures and tensile properties of AlSi10Mg alloy samples under a variety of solidification rates. Journal of Alloys and Compounds 924, pages 166496.
Crossref
Crossref
Min-Su Jo, Young-Hee Cho, Jung-Moo Lee, Soo-Bae Kim, Su-Hyeon Kim & Jae-il Jang. (2022) A Study on the Interrelationship between the Microstructural Features and the Elevated Temperature Strength of Multicomponent Al-Si-Cu-Ni Casting Alloys. Korean Journal of Metals and Materials 60:7, pages 489-501.
Crossref
Crossref
Vladimir Biryukov & Anton Princ. (2022) DEFINITION OF TRIBOLOGICAL CHARACTERISTICS OF THE ALUMINUM AND SILICON ALLOY DEPENDING ON THE COMPOSITION OF ADDITIVES FOR DIESEL LOCOMOTIVE PISTON. Transport engineering 2022:7, pages 34-42.
Crossref
Crossref
Belkacem Korichi, Nacer Zazi, Stéphanie Delbrel, Kieu Ngo & Jean Paul Chopart. (2022) Microstructural, morphological characterization and corrosion behavior of sand cast AlSi10Cu(Fe) alloy in chloride solution. Chemical Papers 76:5, pages 2947-2967.
Crossref
Crossref
Hüseyin Demirtaş, Erdem Karakulak & Nadendla Hari Babu. (2022) Understanding the effect of Ni content on microstructure and mechanical properties of A384 HPDC alloy. Journal of Alloys and Compounds 896, pages 163111.
Crossref
Crossref
Sasmita Tripathy & Goutam Sutradhar. (2022) Effect of Copper Addition on Tensile Behaviour of Al-Cu Alloy Used in High Temperature Applications. International Journal of Surface Engineering and Interdisciplinary Materials Science 10:1, pages 1-16.
Crossref
Crossref
Suresh Chand, Anurag Gaur, Khushboo Rakha & Uma Batra. (2022) Synthesis and characterization of (Al-20Cu-8Si-3Sn) low temperature brazing alloy via powder metallurgy route. Materials Today: Proceedings 62, pages 7574-7580.
Crossref
Crossref
M. M. Voron, M. A. Fon Pruss & O. Ye. Byba. (2021) Microalloying and Modification of Cast Aluminum Alloys for Increasing their Level of Exploitation Properties at Elevated Temperatures. A Review. Casting Processes 145:3, pages 61-68.
Crossref
Crossref
H.Q. Liu, J.C. Pang, M. Wang, S.X. Li & Z.F. Zhang. (2021) Effect of temperature on the mechanical properties of Al–Si–Cu–Mg–Ni–Ce alloy. Materials Science and Engineering: A 824, pages 141762.
Crossref
Crossref
M. M. Voron. (2021) Analysis of Metal Systems for Developing Creep-Resistant Aluminum Alloys. A Review.. Casting Processes 144:2, pages 53-60.
Crossref
Crossref
Andong Du, Anders E. W. Jarfors, Jinchuan Zheng, Kaikun Wang & Gegang Yu. (2021) The Influence of La and Ce on Microstructure and Mechanical Properties of an Al-Si-Cu-Mg-Fe Alloy at High Temperature. Metals 11:3, pages 384.
Crossref
Crossref
Durai Kumaran, Sundar Singh Sivam Sundarlingam Paramasivam & Harshavardhana Natarajan. (2021) Optimization of high speed machining cutting parameters for end milling of AlSi7Cu4 using Taguchi based technique of order preference similarity to the ideal solution. Materials Today: Proceedings 47, pages 6799-6804.
Crossref
Crossref
A. Nidhin Raj. (2021) Experimental investigation of hot tensile properties of Al-8Si-0.4 Mg alloy with varying Ni addition. Materials Today: Proceedings 46, pages 5072-5077.
Crossref
Crossref
Sunday Oke, Stephen Chidera Nwafor & Chris Abiodun Ayanladun. (2020) Optimisation of Casting Geometries for A356 Alloy Composites Reinforced with Organic Materials using Box-Behnken Design Methodology. Journal of Applied Science & Process Engineering 7:2, pages 524-553.
Crossref
Crossref
Jeong Tae Kim, Viktor Soprunyuk, Niraj Chawake, Yong Hui Zheng, Florian Spieckermann, Sung Hwan Hong, Ki Buem Kim & Jürgen Eckert. (2020) Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al–Al3Ni composites by Cu addition. Composites Part B: Engineering 189, pages 107891.
Crossref
Crossref
Min-Su Jo, Young-Hee Cho, Jung-Moo Lee, Su-Hyeon Kim, Jun-Yun Kang, Jae-Gil Jung, Soo-Bae Kim & Jae-il Jang. (2020) A new Zr-rich intermetallic phase in an Al-14Si-3Cu-4.5Ni casting alloy with trace additions of Zr. Intermetallics 117, pages 106667.
Crossref
Crossref
L. Jin, K. Liu & X.-G. Chen. (2020) Improved Elevated Temperature Properties in Al-13%Si Piston Alloys by Mo Addition. Journal of Materials Engineering and Performance 29:1, pages 126-134.
Crossref
Crossref
Lenka Kuchariková, Magdalena Mazur, Eva Tillová, Mária Chalupová, Denisa Závodská & Alan Vaško. (2019) Fracture surfaces of the secondary A226 cast alloy with 0.9% Fe. Engineering Failure Analysis 105, pages 688-698.
Crossref
Crossref
Yingtao Liu, Zeyu Bian, Zhe Chen, Mingliang Wang, Dong Chen & Haowei Wang. (2019) Effect of Mn on the elevated temperature mechanical properties of Al-La alloys. Materials Characterization 155, pages 109821.
Crossref
Crossref
Mohammadreza Zamani, Stefania Toschi, Alessandro Morri, Lorella Ceschini & Salem Seifeddine. (2019) Effect of Mo Addition on Room and High Temperature Tensile Behavior of Al-Si-Cu-Mg Alloy in As-Cast and Heat-Treated Conditions. Advanced Materials Research 1155, pages 71-79.
Crossref
Crossref
Zeyu Bian, Shihan Dai, Liang Wu, Zhe Chen, Mingliang Wang, Dong Chen & Haowei Wang. (2019) Thermal stability of Al–Fe–Ni alloy at high temperatures. Journal of Materials Research and Technology 8:3, pages 2538-2548.
Crossref
Crossref
C. Suwanpreecha, J. Perrin Toinin, R.A. Michi, P. Pandee, D.C. Dunand & C. Limmaneevichitr. (2019) Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates. Acta Materialia 164, pages 334-346.
Crossref
Crossref
Chanun Suwanpreecha, Phromphong Pandee, Ussadawut Patakham, David C. Dunand & Chaowalit Limmaneevichitr. 2019. Light Metals 2019. Light Metals 2019
373
377
.
L. Alyaldin, M. H. Abdelaziz, A. M. Samuel, H. W. Doty, S. Valtierra & F. H. Samuel. (2018) Effects of Alloying Elements and Testing Temperature on the Q-Index of Al–Si Based Alloys. International Journal of Metalcasting 12:4, pages 839-852.
Crossref
Crossref
Toni Bogdanoff, Arne K. Dahle & Salem Seifeddine. (2017) Effect of Co and Ni Addition on the Microstructure and Mechanical Properties at Room and Elevated Temperature of an Al–7%Si Alloy. International Journal of Metalcasting 12:3, pages 434-440.
Crossref
Crossref
Lucia Lattanzi, Maria Di Giovanni, Maverick Giovagnoli, Annalisa Fortini, Mattia Merlin, Daniele Casari, Marisa Di Sabatino, Emanuela Cerri & Gian Garagnani. (2018) Room Temperature Mechanical Properties of A356 Alloy with Ni Additions from 0.5 Wt to 2 Wt %. Metals 8:4, pages 224.
Crossref
Crossref
Lenka Kuchariková, Magdalena Mazur, Eva Tillová, Mária Chalupová, Denisa Závodská & Alan Vaško. (2018) Fracture behavior of the secondary A226 cast alloy with 0.9% Fe. Procedia Structural Integrity 13, pages 1577-1582.
Crossref
Crossref
C. Suwanpreecha, P. Pandee, U. Patakham & C. Limmaneevichitr. (2018) New generation of eutectic Al-Ni casting alloys for elevated temperature services. Materials Science and Engineering: A 709, pages 46-54.
Crossref
Crossref
Eleonora Balducci, Lorella Ceschini, Alessandro Morri & Andrea Morri. (2017) EN AW-4032 T6 Piston Alloy After High-Temperature Exposure: Residual Strength and Microstructural Features. Journal of Materials Engineering and Performance 26:8, pages 3802-3812.
Crossref
Crossref
Jovid Rakhmonov, Giulio Timelli & Franco Bonollo. (2017) Characterization of the solidification path and microstructure of secondary Al-7Si-3Cu-0.3Mg alloy with Zr, V and Ni additions. Materials Characterization 128, pages 100-108.
Crossref
Crossref
Mohammadreza Zamani, Lorenzo Morini, Lorella Ceschini & Salem Seifeddine. (2017) The role of transition metal additions on the ambient and elevated temperature properties of Al-Si alloys. Materials Science and Engineering: A 693, pages 42-50.
Crossref
Crossref
Jovid Rakhmonov, Giulio Timelli & Franco Bonollo. (2016) The Effect of Transition Elements on High-Temperature Mechanical Properties of Al-Si Foundry Alloys-A Review?. Advanced Engineering Materials 18:7, pages 1096-1105.
Crossref
Crossref
Thomas Hametner, Salar Bozorgi, Richard Kretz & Kevin Anders. (2016) Untersuchung von Hochtemperatureigenschaften modifizierter AlSiCu-GusslegierungenInvestigations of High Temperature Mechanical Properties of Modified AlSiCu-Casting Alloys. BHM Berg- und Hüttenmännische Monatshefte 161:3, pages 126-132.
Crossref
Crossref
R. Konečná, G. Nicoletto, L. Kunz & E. Riva. (2016) The role of elevated temperature exposure on structural evolution and fatigue strength of eutectic AlSi12 alloys. International Journal of Fatigue 83, pages 24-35.
Crossref
Crossref
A. Hossain, F. Gulshan & A. S. W. Kurny. Studies on tensile properties and fracture behavior of Al-6Si-0.5Mg (-Cu or/and Ni) alloys at various strain rates. Studies on tensile properties and fracture behavior of Al-6Si-0.5Mg (-Cu or/and Ni) alloys at various strain rates.
Ashutosh Sharma, Myung-Hwan Roh, Do-Hyun Jung & Jae-Pil Jung. (2015) Effect of ZrO2 Nanoparticles on the Microstructure of Al-Si-Cu Filler for Low-Temperature Al Brazing Applications. Metallurgical and Materials Transactions A 47:1, pages 510-521.
Crossref
Crossref
Ashutosh Sharma & Jae-Pil Jung. (2015) Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications. Journal of the Microelectronics and Packaging Society 22:4, pages 1-5.
Crossref
Crossref
Ashutosh Sharma, Y.S. Shin & Jae-Pil Jung. (2015) Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry. Journal of Welding and Joining 33:5, pages 1-8.
Crossref
Crossref
Yuying Yang, Sheng-Yi Zhong, Zhe Chen, Mingliang Wang, Naiheng Ma & Haowei Wang. (2015) Effect of Cr content and heat-treatment on the high temperature strength of eutectic Al–Si alloys. Journal of Alloys and Compounds 647, pages 63-69.
Crossref
Crossref
Tao Lu, Jili Wu, Ye Pan, Shiwen Tao & Yu Chen. (2015) Optimizing the tensile properties of Al–11Si–0.3Mg alloys: Role of Cu addition. Journal of Alloys and Compounds 631, pages 276-282.
Crossref
Crossref
Tao Lu, Ye Pan, Ji-li Wu, Shi-wen Tao & Yu Chen. (2015) Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys. International Journal of Minerals, Metallurgy, and Materials 22:4, pages 405-410.
Crossref
Crossref
A.R. Farkoosh, X. Grant Chen & M. Pekguleryuz. (2015) Interaction between molybdenum and manganese to form effective dispersoids in an Al–Si–Cu–Mg alloy and their influence on creep resistance. Materials Science and Engineering: A 627, pages 127-138.
Crossref
Crossref
A.R. Farkoosh & M. Pekguleryuz. (2013) The effects of manganese on the Τ-phase and creep resistance in Al–Si–Cu–Mg–Ni alloys. Materials Science and Engineering: A 582, pages 248-256.
Crossref
Crossref
Helmut Kaufmann. (2013) Recent Achievements and Future Challenges for R&D on Aluminium Alloys and Processing. Materials Science Forum 765, pages 47-53.
Crossref
Crossref
F. Stadler, H. Antrekowitsch, W. Fragner, H. Kaufmann, E.R. Pinatel & P.J. Uggowitzer. (2013) The effect of main alloying elements on the physical properties of Al–Si foundry alloys. Materials Science and Engineering: A 560, pages 481-491.
Crossref
Crossref
Florian Stadler, Helmut Antrekowitsch, Werner Fragner, Helmut Kaufmann & Peter J. Uggowitzer. 2012. ICAA13: 13th International Conference on Aluminum Alloys. ICAA13: 13th International Conference on Aluminum Alloys
137
142
.
Florian Stadler, Helmut Antrekowitsch, Werner Fragner, Helmut Kaufmann & Peter J. Uggowitzer. 2016. ICAA13 Pittsburgh. ICAA13 Pittsburgh
137
142
.
Danusa Araújo de Moura, Guilherme Lisboa de Gouveia, Leonardo Fernandes Gomes & Jose Spinelli. (2022) Understanding the Effect of Ni Content on Microstructures and Tensile Properties of Alsi10mg Alloy Samples Under a Variety of Solidification Rates. SSRN Electronic Journal.
Crossref
Crossref