Advanced search
Publication Cover
International Materials Reviews Volume 59, 2014 - Issue 8
Journal homepage
4,663
Views
239
CrossRef citations to date
0
Altmetric
Full Critical Reviews

Inkjet printing biomaterials for tissue engineering: bioprinting

Rachel Elizabeth SaundersThe University of ManchesterM13 9PL, United KingdomCorrespondence[email protected]
&
Brian DerbyThe University of ManchesterM13 9PL, United Kingdom
Pages 430-448 | Published online: 21 Jul 2014

Citations (239)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Wei Long Ng, Alvin Chan, Yew Soon Ong & Chee Kai Chua. (2020) Deep learning for fabrication and maturation of 3D bioprinted tissues and organs. Virtual and Physical Prototyping 15:3, pages 340-358.
Read now
Megan K. DeBari, Mia N. Keyser, Michelle A. Bai & Rosalyn D. Abbott. (2020) 3D printing with silk: considerations and applications. Connective Tissue Research 61:2, pages 163-173.
Read now
Sina Azizi Machekposhti, Saeid Mohaved & Roger J. Narayan. (2019) Inkjet dispensing technologies: recent advances for novel drug discovery. Expert Opinion on Drug Discovery 14:2, pages 101-113.
Read now
Abhishek Roy, Varun Saxena & Lalit M. Pandey. (2018) 3D printing for cardiovascular tissue engineering: a review. Materials Technology 33:6, pages 433-442.
Read now
Qian Peng, Zhangui Tang, Ousheng Liu & Zhiwei Peng. (2015) Rapid prototyping-assisted maxillofacial reconstruction. Annals of Medicine 47:3, pages 186-208.
Read now

Articles from other publishers (234)

Jiachen Liu & Changxue Xu. (2024) Improving Uniformity of Cell Distribution in Post-Inkjet-Based Bioprinting. Journal of Manufacturing Science and Engineering 146:1.
Crossref
Miji Yeo, Anwita Sarkar, Yogendra Pratap Singh, Irem Deniz Derman, Pallab Datta & Ibrahim T Ozbolat. (2023) Synergistic coupling between 3D bioprinting and vascularization strategies. Biofabrication 16:1, pages 012003.
Crossref
Eun Jo Jang, Rajkumar Patel, Narendra V. Sankpal, Louis-S. Bouchard & Madhumita Patel. (2024) Alginate, hyaluronic acid, and chitosan-based 3D printing hydrogel for cartilage tissue regeneration. European Polymer Journal 202, pages 112651.
Crossref
Kaicheng Yu, Qiang Gao, Zexue Lin, Fei Wang, Peng Zhang, YongDan Liu & Lihua Lu. (2024) Investigation of the temperature gradient control in the printing space for the material extrusion of medical biodegradable hydrogel. Computers in Biology and Medicine 168, pages 107722.
Crossref
Mariya Dimitrova, Angelina Vlahova, Yavor Kalachev, Stefan Zlatev, Rada Kazakova & Saverio Capodiferro. (2023) Recent Advances in 3D Printing of Polymers for Application in Prosthodontics. Polymers 15:23, pages 4525.
Crossref
Anabela Veiga, Sara Madureira, João B. Costa, Filipa Castro, Fernando Rocha & Ana L. Oliveira. (2023) Tackling current production of HAp and HAp-driven biomaterials. Materials Advances 4:22, pages 5453-5478.
Crossref
Mudassar Rehman, Wang Yanen, Ray Tahir Mushtaq, Kashif Ishfaq, Sadaf Zahoor, Ammar Ahmed, M. Saravana Kumar, Thierno Gueyee, Md Mazedur Rahman & Jakia Sultana. (2022) Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic. Progress in Additive Manufacturing 8:5, pages 1007-1041.
Crossref
Veasna Soum, Viktor Lehmann, Huckjin Lee, Sovann Khan, Oh‐Sun Kwon & Kwanwoo Shin. (2023) A Novel Polymeric Substrate with Dual‐Porous Structures for High‐Performance Inkjet‐Printed Flexible Electronic Devices. Macromolecular Materials and Engineering 308:10.
Crossref
Magdalena Kulus, Maurycy Jankowski, Wiesława Kranc, Afsaneh Golkar Narenji, Maryam Farzaneh, Piotr Dzięgiel, Maciej Zabel, Paweł Antosik, Dorota Bukowska, Paul Mozdziak & Bartosz Kempisty. (2023) Bioreactors, scaffolds and microcarriers and in vitro meat production—current obstacles and potential solutions. Frontiers in Nutrition 10.
Crossref
Jiatian Chen, Huaijuan Zhou, Yingwei Fan, Ge Gao, Yulong Ying & Jinhua Li. (2023) 3D printing for bone repair: Coupling infection therapy and defect regeneration. Chemical Engineering Journal 471, pages 144537.
Crossref
Wei Long Ng, Xi Huang, Viktor Shkolnikov, Ratima Suntornnond & Wai Yee Yeong. (2023) Polyvinylpyrrolidone-based bioink: influence of bioink properties on printing performance and cell proliferation during inkjet-based bioprinting. Bio-Design and Manufacturing.
Crossref
Miada Abubaker Osman, Nick Virgilio, Mahmoud Rouabhia, Louis‐Etienne Lorenzo & Frej Mighri. (2023) A novel foaming technique to develop functional open‐cell polylactic acid scaffolds for bone tissue engineering. Journal of Applied Polymer Science 140:32.
Crossref
Lei Nie, Yanfang Sun, Oseweuba Valentine Okoro, Yaling Deng, Guohua Jiang & Amin Shavandi. (2023) Click chemistry for 3D bioprinting. Materials Horizons 10:8, pages 2727-2763.
Crossref
Zhonghua Sun, Jack Zhao, Emily Leung, Maria Flandes-Iparraguirre, Michael Vernon, Jenna Silberstein, Elena M. De-Juan-Pardo & Shirley Jansen. (2023) Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions. Biomolecules 13:8, pages 1180.
Crossref
Santosh Kumar & Rakesh Kumar. (2023) Overview of 3D and 4D Printing Techniques and their Emerging Applications in Medical Sectors. Current Materials Science 16:2, pages 143-170.
Crossref
Lei Wang, Anduo Zhou, Chongshuai Chen, Xia Huang, Shanfeng Zhang & Junying Chen. (2023) Preparation and properties of composite hydrogels for 3D bioprinting . Polymers for Advanced Technologies 34:7, pages 2369-2383.
Crossref
Larisa T. Volova, Gennadiy P. Kotelnikov, Igor Shishkovsky, Dmitriy B. Volov, Natalya Ossina, Nikolay A. Ryabov, Aleksey V. Komyagin, Yeon Ho Kim & Denis G. Alekseev. (2023) 3D Bioprinting of Hyaline Articular Cartilage: Biopolymers, Hydrogels, and Bioinks. Polymers 15:12, pages 2695.
Crossref
Mei-Xian Li, Qian-Qi Wei, Hui-Lin Mo, Yu Ren, Wei Zhang, Huan-Jun Lu & Yoon Ki Joung. (2023) Challenges and advances in materials and fabrication technologies of small-diameter vascular grafts. Biomaterials Research 27:1.
Crossref
Alperen Abaci, Gulden Camci-Unal & Murat Guvendiren. (2023) Three-dimensional bioprinting for medical applications. MRS Bulletin 48:6, pages 624-631.
Crossref
Fei Xing, Jiawei Xu, Peiyun Yu, Yuxi Zhou, Man Zhe, Rong Luo, Ming Liu, Zhou Xiang, Xin Duan & Ulrike Ritz. (2023) Recent advances in biofabrication strategies based on bioprinting for vascularized tissue repair and regeneration. Materials & Design 229, pages 111885.
Crossref
Boštjan Vihar, Marko Milojević, Luka Banović & Uroš Maver. 2023. Functional Biomaterials. Functional Biomaterials 305 334 .
Jaciara Fernanda Gomes Gama, Evellyn Araujo Dias, Rosângela Marques Gonçalves Aguiar Coelho, André Maia Chagas, José Aguiar Coelho Nt & Luiz Anastacio Alves. (2023) Development and implementation of a significantly low-cost 3D bioprinter using recycled scrap material. Frontiers in Bioengineering and Biotechnology 11.
Crossref
Wanhyuk Chang, Eun Heui Kang, Heon Jun Jeong, Wonjoon Choi & Joon Hyung Shim. (2023) Inkjet printing of perovskite ceramics for high-performance proton ceramic fuel cells. Energy 268, pages 126489.
Crossref
Qinghua Wei, Jiayi Zhou, Yalong An, Mingyang Li, Juan Zhang & Sheng Yang. (2023) Modification, 3D printing process and application of sodium alginate based hydrogels in soft tissue engineering: A review. International Journal of Biological Macromolecules 232, pages 123450.
Crossref
George M. Williams & J. Paul Harmon. (2023) Dispersion controlled nanocomposite gradient index lenses. Optics Continuum 2:2, pages 456.
Crossref
Mengdong Cui, Taijie Zhan, Jiamin Yang, Hangyu Dang, Guoliang Yang, Hengxin Han, Linfeng Liu & Yi Xu. (2023) Droplet Generation, Vitrification, and Warming for Cell Cryopreservation: A Review. ACS Biomaterials Science & Engineering.
Crossref
Songtao Hu, Xijia Ding, Beibei Fan, Chi Zhang, Bo Zhang, Xi Shi & Zhike Peng. (2023) Position sensing of jetting droplets enabled by triboelectric nanogenerators. Nano Energy, pages 108289.
Crossref
Ankur Sood, Anuj Kumar, Vijai Kumar Gupta, Chul Min Kim & Sung Soo Han. (2022) Translational Nanomedicines Across Human Reproductive Organs Modeling on Microfluidic Chips: State-of-the-Art and Future Prospects. ACS Biomaterials Science & Engineering 9:1, pages 62-84.
Crossref
Xinxing Chen, Aidan P. O’Mahony & Tracie Barber. (2023) Spreading behavior of cell-laden droplets in 3D bioprinting process. Journal of Applied Physics 133:1.
Crossref
Asma Musfira Shabbirahmed, Rajkumar Sekar, Levin Anbu Gomez, Medidi Raja Sekhar, Samson Prince Hiruthyaswamy, Nagaraj Basavegowda & Prathap Somu. (2023) Recent Developments of Silk-Based Scaffolds for Tissue Engineering and Regenerative Medicine Applications: A Special Focus on the Advancement of 3D Printing. Biomimetics 8:1, pages 16.
Crossref
Atheer Awad, Alvaro Goyanes, Abdul W. Basit, Ahmed S. Zidan, Changxue Xu, Wei Li, Roger J. Narayan & Roland K. Chen. (2023) A Review of State-of-the-Art on Enabling Additive Manufacturing Processes for Precision Medicine. Journal of Manufacturing Science and Engineering 145:1.
Crossref
Laldinthari Suamte, Akriti Tirkey, Jugal Barman & Punuri Jayasekhar Babu. (2023) Various manufacturing methods and ideal properties of scaffolds for tissue engineering applications. Smart Materials in Manufacturing 1, pages 100011.
Crossref
Wei Long Ng & Wai Yee Yeong. 2023. Additive Manufacturing of Biopolymers. Additive Manufacturing of Biopolymers 331 369 .
Ali Mousavi, Elena Provaggi, Deepak M. Kalaskar & Houman Savoji. 2023. 3D Printing in Medicine. 3D Printing in Medicine 29 57 .
Ravinder Kumar, Harmanpreet Singh, Ashish Kumar Sahani & Prabir Sarkar. 2023. Innovative Processes and Materials in Additive Manufacturing. Innovative Processes and Materials in Additive Manufacturing 81 103 .
Zenghui Liu, Hua Wu, Wei Ren & Zuo-Guang Ye. 2023. Comprehensive Inorganic Chemistry III. Comprehensive Inorganic Chemistry III 135 171 .
Helia Sadat Haeri Boroojeni, Sadra Mohaghegh & Arash Khojasteh. 2023. Emerging Technologies in Oral and Maxillofacial Surgery. Emerging Technologies in Oral and Maxillofacial Surgery 53 76 .
Sadra Mohaghegh & Hanieh Nokhbatolfoghahaei. 2023. Emerging Technologies in Oral and Maxillofacial Surgery. Emerging Technologies in Oral and Maxillofacial Surgery 345 354 .
Guy Decante, Ibrahim Fatih Cengiz, Joana Silva-Correia, Rui L. Reis & J. Miguel Oliveira. 2023. Orthopaedic Sports Medicine. Orthopaedic Sports Medicine 1 21 .
Shaojun Liang, Yijun Su & Rui Yao. 2023. Human iPSC-derived Disease Models for Drug Discovery. Human iPSC-derived Disease Models for Drug Discovery 29 56 .
He-Qi Xu, Jia-Chen Liu, Zheng-Yi Zhang & Chang-Xue Xu. (2022) A review on cell damage, viability, and functionality during 3D bioprinting. Military Medical Research 9:1.
Crossref
Maria Anna Chliara, Stavroula Elezoglou & Ioanna Zergioti. (2022) Bioprinting on Organ-on-Chip: Development and Applications. Biosensors 12:12, pages 1135.
Crossref
Amir A. Elhadad, Ana Alcudia, Belén Begines, Eva M. Pérez-Soriano & Yadir Torres. (2022) A multidisciplinary perspective on the latest trends in artificial cartilage fabrication to mimic real tissue. Applied Materials Today 29, pages 101603.
Crossref
Xiaoyun Wei, Beisi Huang, Keke Chen, Zicheng Fan, Ling Wang & Mingen Xu. (2022) Dot extrusion bioprinting of spatially controlled heterogenous tumor models. Materials & Design 223, pages 111152.
Crossref
Md Jasim Uddin, Jasmin Hassan & Dennis Douroumis. (2022) Thermal Inkjet Printing: Prospects and Applications in the Development of Medicine. Technologies 10:5, pages 108.
Crossref
Qiang Gao, Kaicheng Yu, Fangzheng Chen, Lihua Lu & Peng Zhang. (2022) Investigation on the Temperature Distribution Uniformity of an Extrusion-Based 3D Print Head and Its Temperature Control Strategy. Pharmaceutics 14:10, pages 2108.
Crossref
Heqi Xu, Dulce Maria Martinez Salazar, Md Shahriar & Changxue Xu. (2022) Investigation and Characterization of Cell Aggregation During and After Inkjet-Based Bioprinting of Cell-Laden Bioink. Journal of Manufacturing Science and Engineering 144:10.
Crossref
Mingyang Li, Daocen Sun, Juan Zhang, Yanmei Wang, Qinghua Wei & Yanen Wang. (2022) Application and development of 3D bioprinting in cartilage tissue engineering. Biomaterials Science 10:19, pages 5430-5458.
Crossref
Wei Long Ng & Chee Kai Chua. 2022. Additive Manufacturing in Biomedical Applications. Additive Manufacturing in Biomedical Applications 22 35 .
Srimanta Barui. 2022. Additive Manufacturing in Biomedical Applications. Additive Manufacturing in Biomedical Applications 266 284 .
Codruta Victoria Tigmeanu, Lavinia Cosmina Ardelean, Laura-Cristina Rusu & Meda-Lavinia Negrutiu. (2022) Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review. Polymers 14:17, pages 3658.
Crossref
Alexander Kamyshny, Enrico Sowade & Shlomo Magdassi. 2022. Inkjet Printing in Industry. Inkjet Printing in Industry 93 124 .
Ratima Suntornnond, Wei Long Ng, Xi Huang, Chuen Herh Ethan Yeow & Wai Yee Yeong. (2022) Improving printability of hydrogel-based bio-inks for thermal inkjet bioprinting applications via saponification and heat treatment processes . Journal of Materials Chemistry B 10:31, pages 5989-6000.
Crossref
Tuser T. Biswas, Junchun Yu & Vincent A. Nierstrasz. (2022) Sequential Inkjet Printing of Lysozyme and Tyrosinase on Polyamide Fabric: Sustainable Enzyme Binding on Textile Surface. Advanced Materials Interfaces 9:22.
Crossref
Samantha Fernandes, Cian Vyas, Peggy Lim, Rúben F. Pereira, Amaya Virós & Paulo Bártolo. (2022) 3D Bioprinting: An Enabling Technology to Understand Melanoma. Cancers 14:14, pages 3535.
Crossref
Immacolata Greco, Vanja Miskovic, Carolina Varon, Chiara Marraffa & Carlo S. Iorio. (2022) Printability of Double Network Alginate-Based Hydrogel for 3D Bio-Printed Complex Structures. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Na Liu, Xiaopei Zhang, Qingxia Guo, Tong Wu & Yuanfei Wang. (2022) 3D Bioprinted Scaffolds for Tissue Repair and Regeneration. Frontiers in Materials 9.
Crossref
Sara Nadine, Ada Chung, Sibel Emir Diltemiz, Brooke Yasuda, Charles Lee, Vahid Hosseini, Solmaz Karamikamkar, Natan Roberto de Barros, Kalpana Mandal, Shailesh Advani, Benjamin Behnam Zamanian, Marvin Mecwan, Yangzhi Zhu, Mohammad Mofidfar, Mohammad Reza Zare, João Mano, Mehmet Remzi Dokmeci, Farshid Alambeigi & Samad Ahadian. (2022) Advances in microfabrication technologies in tissue engineering and regenerative medicine. Artificial Organs 46:7.
Crossref
Sathish Pandiyan, Manuel Bianco, Ahmad El-Kharouf, Rumen I. Tomov & Robert Steinberger-Wilckens. (2022) Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices. Ceramics International 48:14, pages 20456-20466.
Crossref
Heqi Xu, Jiachen Liu, Zhengyi Zhang & Changxue Xu. (2022) Cell sedimentation during 3D bioprinting: a mini review. Bio-Design and Manufacturing 5:3, pages 617-626.
Crossref
Qiuyi Mao, Bowen Zhu, Hai Zhuang & Shoushan Bu. (2022) 3D-Printing Assisted SF-SA Based MgP Hybrid Hydrogel Scaffold for Bone Tissue Engineering. Frontiers in Materials 9.
Crossref
Awaji Y. Safhi. (2022) Three-Dimensional (3D) Printing in Cancer Therapy and Diagnostics: Current Status and Future Perspectives. Pharmaceuticals 15:6, pages 678.
Crossref
Tongrui Zhang, Min Nie & Yijun Li. (2022) Current Advances and Future Perspectives of Advanced Polymer Processing for Bone and Tissue Engineering: Morphological Control and Applications. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Peng Zhang, Qiang Gao, Kaicheng Yu, Yifeng Yao & Lihua Lu. (2022) Investigation on the Temperature Control Accuracy of a Print Head for Extrusion 3D Printing and Its Improved Design. Biomedicines 10:6, pages 1233.
Crossref
Heqi Xu, Dulce Maria Martinez Salazar & Changxue Xu. (2022) Investigation of Cell Concentration Change and Cell Aggregation Due to Cell Sedimentation during Inkjet-Based Bioprinting of Cell-Laden Bioink. Machines 10:5, pages 315.
Crossref
Tuser T. Biswas, Junchun Yu & Vincent A. Nierstrasz. (2022) Piezoelectric inkjet printing of tyrosinase (polyphenol oxidase) enzyme on atmospheric plasma treated polyamide fabric. Scientific Reports 12:1.
Crossref
Lalit Kumar, Abid Haleem & Mohd. Javaid. (2022) Systematic Development in Medical by Using 3D Printing Technology: A Brief Review. Journal of Industrial Integration and Management.
Crossref
Meiqi Li, Tingchun Shi, Danyu Yao, Xiuyan Yue, Haoxuan Wang & Kezhou Liu. (2022) High-cytocompatible semi-IPN bio-ink with wide molecular weight distribution for extrusion 3D bioprinting. Scientific Reports 12:1.
Crossref
Kai Li, Runju Wang, Junkao Liu, Yuming Feng & Yingxiang Liu. (2022) On-demand direct printing of tin microdots by a piezoelectric microjet: design, simulation, and experimental evaluation. Smart Materials and Structures 31:4, pages 045017.
Crossref
Yanyan Cao, Shengbo Sang, Yang An, Chuan Xiang, Yanping Li & Yonghuan Zhen. (2021) Progress of 3D Printing Techniques for Nasal Cartilage Regeneration. Aesthetic Plastic Surgery 46:2, pages 947-964.
Crossref
Duarte Moura, Rúben F. Pereira & Inês C. Gonçalves. (2022) Recent advances on bioprinting of hydrogels containing carbon materials. Materials Today Chemistry 23, pages 100617.
Crossref
Xiangbin Zeng, Zijie Meng, Jiankang He, Mao Mao, Xiao Li, Pengyu Chen, Jinhai Fan & Dichen Li. (2022) Embedded bioprinting for designer 3D tissue constructs with complex structural organization. Acta Biomaterialia 140, pages 1-22.
Crossref
Thomas D. Pollard, Margherita Bonetti, Adam Day, Simon Gaisford, Mine Orlu, Abdul W. Basit, Sudaxshina Murdan & Alvaro Goyanes. (2022) Printing Drugs onto Nails for Effective Treatment of Onychomycosis. Pharmaceutics 14:2, pages 448.
Crossref
Mona Alibolandi, Marzieh Mohammadi, Reihaneh Teimouri, Maryam Babaei, Jebraeil Movaffagh & Mohammad Ramezani. 2022. Nanoengineering of Biomaterials. Nanoengineering of Biomaterials 1 31 .
Shi Hua TanZong Heng NgoDip Biomed SciDavid LeavesleyKun Liang. (2022) Recent Advances in the Design of Three-Dimensional and Bioprinted Scaffolds for Full-Thickness Wound Healing. Tissue Engineering Part B: Reviews 28:1, pages 160-181.
Crossref
Yuanhang Xu, Feiyang Zhang, Weijie Zhai, Shujie Cheng, Jinghua Li & Yi Wang. (2022) Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds. Polymers 14:3, pages 566.
Crossref
Kirthanashri S. Vasanthan, Varadharajan Srinivasan, Vidhi Mathur, Prachi Agarwal, Neha Negi & Simran Kumari. (2022) 3D Bioprinting for esophageal tissue regeneration: A review. Journal of Materials Research 37:1, pages 88-113.
Crossref
Amedeo Franco Bonatti, Gabriele Maria Fortunato, Carmelo De Maria & Giovanni Vozzi. 2022. Bioprinting. Bioprinting 19 49 .
Nisha Shankhwar, Prosenjit Saha, Marta Zurek-Mortka, Sabu Thomas & Aynur Unal. 2022. Tissue Engineering. Tissue Engineering 575 625 .
Catherine Seo, Chaoxing Zhang & Huinan Liu. 2022. Musculoskeletal Tissue Engineering. Musculoskeletal Tissue Engineering 201 241 .
Rupambika Das & Javier G. Fernandez. 2022. Microfluidics and Biosensors in Cancer Research. Microfluidics and Biosensors in Cancer Research 139 170 .
Qiqi Gao, Byoung-Soo Kim & Ge Gao. (2021) Advanced Strategies for 3D Bioprinting of Tissue and Organ Analogs Using Alginate Hydrogel Bioinks. Marine Drugs 19:12, pages 708.
Crossref
Radia Jamee, Yusha Araf, Iftekhar Bin Naser & Salman Khan Promon. (2021) The promising rise of bioprinting in revolutionalizing medical science: Advances and possibilities. Regenerative Therapy 18, pages 133-145.
Crossref
Ya.Yu Filippov, A.M. Murashko, P.V. Evdokimov, T.V. Safronova & V.I. Putlayev. (2021) Stereolithography 3D printed calcium pyrophosphate macroporous ceramics for bone grafting. Open Ceramics 8, pages 100185.
Crossref
Chuang Gao, Chunxiang Lu, Zhian Jian, Tingrui Zhang, Zhongjian Chen, Quangang Zhu, Zongguang Tai & Yuanyuan Liu. (2021) 3D bioprinting for fabricating artificial skin tissue. Colloids and Surfaces B: Biointerfaces 208, pages 112041.
Crossref
Shebin Tharakan, Shams Khondkar & Azhar Ilyas. (2021) Bioprinting of Stem Cells in Multimaterial Scaffolds and Their Applications in Bone Tissue Engineering. Sensors 21:22, pages 7477.
Crossref
Rory Gibney & Eleonora Ferraris. (2021) Bioprinting of Collagen Type I and II via Aerosol Jet Printing for the Replication of Dense Collagenous Tissues. Frontiers in Bioengineering and Biotechnology 9.
Crossref
Hag Sung Lee, Kyu Hwan Choi, Jin Kyoung Park, Hyang Mi Lee, Jieun Lee, Jin Woong Kim, Sang Hyuk Im & Bum Jun Park. (2021) Fabrication of kinetically stable micropolymofoam particles and the spontaneous induction of morphological transformation. Chemical Engineering Journal 424, pages 130505.
Crossref
Jisoo Kim, Jinah Jang & Dong-Woo Cho. (2021) Recapitulating the Cancer Microenvironment Using Bioprinting Technology for Precision Medicine. Micromachines 12:9, pages 1122.
Crossref
Shuxiang Cai, Yalin Sun, Zhen Wang, Wenguang Yang, Xiangyu Li & Haibo Yu. (2021) Mechanisms, influencing factors, and applications of electrohydrodynamic jet printing. Nanotechnology Reviews 10:1, pages 1046-1078.
Crossref
Jana Stepanovska, Monika Supova, Karel Hanzalek, Antonin Broz & Roman Matejka. (2021) Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics. Biomedicines 9:9, pages 1137.
Crossref
Livia M. Kalossaka, Giovanni Sena, Laura M.C. Barter & Connor Myant. (2021) Review: 3D printing hydrogels for the fabrication of soilless cultivation substrates. Applied Materials Today 24, pages 101088.
Crossref
Sonu Kumar, Abhimanyu Tharayil & Sabu Thomas. (2021) 3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers. ACS Applied Polymer Materials 3:8, pages 3685-3701.
Crossref
Piyush Kumar, Stephen Ebbens & Xiubo Zhao. (2021) Inkjet printing of mammalian cells – Theory and applications. Bioprinting 23, pages e00157.
Crossref
Xinyun Zhai & Wenguang Liu. 2021. Injectable Hydrogels for 3D Bioprinting. Injectable Hydrogels for 3D Bioprinting 339 359 .
Wonbin Park, Ge Gao & Dong-Woo Cho. (2021) Tissue-Specific Decellularized Extracellular Matrix Bioinks for Musculoskeletal Tissue Regeneration and Modeling Using 3D Bioprinting Technology. International Journal of Molecular Sciences 22:15, pages 7837.
Crossref
Jacob Reiss, Samantha Robertson & Masatoshi Suzuki. (2021) Cell Sources for Cultivated Meat: Applications and Considerations throughout the Production Workflow. International Journal of Molecular Sciences 22:14, pages 7513.
Crossref
Mohamed H. Hassan, Cian Vyas, Bruce Grieve & Paulo Bartolo. (2021) Recent Advances in Enzymatic and Non-Enzymatic Electrochemical Glucose Sensing. Sensors 21:14, pages 4672.
Crossref
Faraz Fazal, Sakshika Raghav, Anthony Callanan, Vasileios Koutsos & Norbert Radacsi. (2021) Recent advancements in the bioprinting of vascular grafts. Biofabrication 13:3, pages 032003.
Crossref
Eero Kuusisto, Joonas J. Heikkinen, Päivi Järvinen, Tiina Sikanen, Sami Franssila & Ville Jokinen. (2021) Inkjet-printed flexible silver electrodes on thiol-enes. Sensors and Actuators B: Chemical 336, pages 129727.
Crossref
Hee-Gyeong Yi, Hyeonji Kim, Junyoung Kwon, Yeong-Jin Choi, Jinah Jang & Dong-Woo Cho. (2021) Application of 3D bioprinting in the prevention and the therapy for human diseases. Signal Transduction and Targeted Therapy 6:1.
Crossref
Jianhua Zhang, Esther Wehrle, Marina Rubert & Ralph Müller. (2021) 3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors. International Journal of Molecular Sciences 22:8, pages 3971.
Crossref
Robin Augustine, Sumama Nuthana Kalva, Rashid Ahmad, Alap Ali Zahid, Shajia Hasan, Ajisha Nayeem, Lana McClements & Anwarul Hasan. (2021) 3D Bioprinted cancer models: Revolutionizing personalized cancer therapy. Translational Oncology 14:4, pages 101015.
Crossref
Tarun Agarwal, Dishary Banerjee, Rocktotpal Konwarh, Timothy Esworthy, Jyoti Kumari, Valentina Onesto, Prativa Das, Bae Hoon Lee, Frank A.D.T.G. Wagener, Pooyan Makvandi, Virgilio Mattoli, Sudip Kumar Ghosh, Tapas Kumar Maiti, Lijie Grace Zhang & Ibrahim T. Ozbolat. (2021) Recent advances in bioprinting technologies for engineering hepatic tissue. Materials Science and Engineering: C 123, pages 112013.
Crossref
Panita Maturavongsadit, Lokesh Karthik Narayanan, Parth Chansoria, Rohan Shirwaiker & S. Rahima Benhabbour. (2021) Cell-Laden Nanocellulose/Chitosan-Based Bioinks for 3D Bioprinting and Enhanced Osteogenic Cell Differentiation. ACS Applied Bio Materials 4:3, pages 2342-2353.
Crossref
Wei Liu, Shifeng Liu, Yunzhe Li, Peng Zhou & Qian Ma. (2021) Biomimetic Design of 3D Printed Tissue-Engineered Bone Constructs. Current Nanoscience 17:2, pages 223-240.
Crossref
Shen Ji & Murat Guvendiren. (2021) Complex 3D bioprinting methods. APL Bioengineering 5:1.
Crossref
Tanhai Borkar, Vidul Goenka & Amit Kumar Jaiswal. (2021) Application of poly-ε-caprolactone in extrusion-based bioprinting. Bioprinting 21, pages e00111.
Crossref
Parth Chansoria, Karl Schuchard & Rohan A. Shirwaiker. (2020) Process hybridization schemes for multiscale engineered tissue biofabrication. WIREs Nanomedicine and Nanobiotechnology 13:2.
Crossref
Tuser Biswas, Junchun Yu & Vincent Nierstrasz. (2021) Effective Pretreatment Routes of Polyethylene Terephthalate Fabric for Digital Inkjet Printing of Enzyme. Advanced Materials Interfaces 8:6.
Crossref
Yannik Bräuniger, Stefanie Lochmann, Julia Grothe, Martin Hantusch & Stefan Kaskel. (2021) Piezoelectric Inkjet Printing of Nanoporous Carbons for Micro-supercapacitor Devices. ACS Applied Energy Materials 4:2, pages 1560-1567.
Crossref
Colin Jamieson, Patrick Keenan, D'Arcy Kirkwood, Saba Oji, Caroline Webster, Keith A. Russell & Thomas G. Koch. (2021) A Review of Recent Advances in 3D Bioprinting With an Eye on Future Regenerative Therapies in Veterinary Medicine. Frontiers in Veterinary Science 7.
Crossref
Srimanta Barui. (2020) 3D inkjet printing of biomaterials: Principles and applications. MEDICAL DEVICES & SENSORS 4:1.
Crossref
Ranjit Barua, Sudipto Datta, Pallab Datta & Amit Roy Chowdhury. 2021. Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement. Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement 718 733 .
Wissam Farhat, François Chatelain, Auriane Marret, Lionel Faivre, Lousineh Arakelian, Pierre Cattan & Alexandra Fuchs. (2021) Trends in 3D bioprinting for esophageal tissue repair and reconstruction. Biomaterials 267, pages 120465.
Crossref
Greeshma Ratheesh, Cedryck Vaquette, Prashant Sonar & Yin Xiao. 2021. Regenerated Organs. Regenerated Organs 81 95 .
Deepti Singh, Daniel J. Thomas & Anjan Motamarry. 2021. 3D Printing in Medicine and Surgery. 3D Printing in Medicine and Surgery 265 270 .
Elif Ilhan, Esma Ahlatcioglu Ozerol, Saadet Alpdagtas, Mustafa Sengor, Cem Bulent Ustundag & Oguzhan Gunduz. 2021. 3D printable Gel-inks for Tissue Engineering. 3D printable Gel-inks for Tissue Engineering 229 259 .
Songul Ulag, Sumeyye Cesur, Ecem Dogan, Mustafa Sengor, Nazmi Ekren, Cem Bulent Ustundag & Oguzhan Gunduz. 2021. 3D printable Gel-inks for Tissue Engineering. 3D printable Gel-inks for Tissue Engineering 161 190 .
Alexandra I. Cernencu. 2021. 3D printable Gel-inks for Tissue Engineering. 3D printable Gel-inks for Tissue Engineering 79 127 .
G. V. Yashaswini Devi, Sukumaran Anil & Jayachandran Venkatesan. 2021. Engineering Materials for Stem Cell Regeneration. Engineering Materials for Stem Cell Regeneration 691 706 .
Sina Azizi Machekposhti, Saeid Movahed & Roger J. Narayan. (2020) Physicochemical parameters that underlie inkjet printing for medical applications. Biophysics Reviews 1:1.
Crossref
Amin Abdollahi, Hossein Roghani-Mamaqani, Bahareh Razavi & Mehdi Salami-Kalajahi. (2020) Photoluminescent and Chromic Nanomaterials for Anticounterfeiting Technologies: Recent Advances and Future Challenges. ACS Nano 14:11, pages 14417-14492.
Crossref
S. Swetha, K. Lavanya, R. Sruthi & N. Selvamurugan. (2020) An insight into cell-laden 3D-printed constructs for bone tissue engineering. Journal of Materials Chemistry B 8:43, pages 9836-9862.
Crossref
Sina Seipel, Junchun Yu & Vincent A. Nierstrasz. (2020) Effect of physical parameters and temperature on the piezo-electric jetting behaviour of UV-curable photochromic inks. Scientific Reports 10:1.
Crossref
Chew Teng Tan, Kun Liang, Zong Heng Ngo, Christabel Thembela Dube & Chin Yan Lim. (2020) Application of 3D Bioprinting Technologies to the Management and Treatment of Diabetic Foot Ulcers. Biomedicines 8:10, pages 441.
Crossref
Byoung Soo Kim, Sanskrita Das, Jinah Jang & Dong-Woo Cho. (2020) Decellularized Extracellular Matrix-based Bioinks for Engineering Tissue- and Organ-specific Microenvironments. Chemical Reviews 120:19, pages 10608-10661.
Crossref
Ana Clotilde Fonseca, Ferry P. W. Melchels, Miguel J. S. Ferreira, Samuel R. Moxon, Geoffrey Potjewyd, Tim R. Dargaville, Susan J. Kimber & Marco Domingos. (2020) Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine. Chemical Reviews 120:19, pages 11093-11139.
Crossref
Mihyun Lee, Riccardo Rizzo, František Surman & Marcy Zenobi-Wong. (2020) Guiding Lights: Tissue Bioprinting Using Photoactivated Materials. Chemical Reviews 120:19, pages 10950-11027.
Crossref
Xinda Li, Boxun Liu, Ben Pei, Jianwei ChenDezhi Zhou, Jiayi Peng, Xinzhi Zhang, Wang Jia & Tao Xu. (2020) Inkjet Bioprinting of Biomaterials. Chemical Reviews 120:19, pages 10793-10833.
Crossref
Andrea S. Theus, Liqun Ning, Boeun Hwang, Carmen Gil, Shuai Chen, Allison Wombwell, Riya Mehta & Vahid Serpooshan. (2020) Bioprintability: Physiomechanical and Biological Requirements of Materials for 3D Bioprinting Processes. Polymers 12:10, pages 2262.
Crossref
Yang Sun, Gang Wang, Zhi Jing, Jingting Liang, Jiajie Sui, Jinzhen Fan & Jiannan Li. (2020) Microfluidic Pneumatic Printed Sandwiched Microdroplet Array for High-Throughput Enzymatic Reaction and Screening. SLAS Technology 25:5, pages 446-454.
Crossref
Nazanin Amiryaghoubi, Marziyeh Fathi, Nader Noroozi Pesyan, Mohammad Samiei, Jaleh Barar & Yadollah Omidi. (2020) Bioactive polymeric scaffolds for osteogenic repair and bone regenerative medicine. Medicinal Research Reviews 40:5, pages 1833-1870.
Crossref
Gareth Turnbull, Jon Clarke, Frédéric Picard, Weidong Zhang, Philip Riches, Bin Li & Wenmiao Shu. (2020) 3D biofabrication for soft tissue and cartilage engineering. Medical Engineering & Physics 82, pages 13-39.
Crossref
Francis L. C. Morgan, Lorenzo Moroni & Matthew B. Baker. (2020) Dynamic Bioinks to Advance Bioprinting. Advanced Healthcare Materials 9:15.
Crossref
Hongyuan Zhu, Haiqian Yang, Yufei Ma, Tian Jian Lu, Feng Xu, Guy M. Genin & Min Lin. (2020) Spatiotemporally Controlled Photoresponsive Hydrogels: Design and Predictive Modeling from Processing through Application. Advanced Functional Materials 30:32.
Crossref
You Chen, Xiong Xiong, Xin Liu, Rongwei Cui, Chen Wang, Guoru Zhao, Wei Zhi, Mengjie Lu, Ke Duan, Jie Weng, Shuxin Qu & Jianhua Ge. (2020) 3D Bioprinting of shear-thinning hybrid bioinks with excellent bioactivity derived from gellan/alginate and thixotropic magnesium phosphate-based gels. Journal of Materials Chemistry B 8:25, pages 5500-5514.
Crossref
Pramod Dorishetty, Naba K. Dutta & Namita Roy Choudhury. (2020) Bioprintable tough hydrogels for tissue engineering applications. Advances in Colloid and Interface Science 281, pages 102163.
Crossref
Sanjairaj Vijayavenkataraman, Anna Garcia-Sabate & Jeremy CM Teo. (2020) Specialized Multimaterial Print Heads for 3D Hydrogel Printing: Tissue-Engineering Applications. IEEE Nanotechnology Magazine 14:3, pages 42-52.
Crossref
Mohd Javaid & Abid Haleem. (2020) 3D printed tissue and organ using additive manufacturing: An overview. Clinical Epidemiology and Global Health 8:2, pages 586-594.
Crossref
Dege Li, Yi Cao, Hang Dong, Xinlei Wu, Qiang Sun, Chi Ma, Bingfang Huang, Shokoufeh Rastgar, Gunther Wittstock, Yonghong Liu & Yanzhen Zhang. (2020) Pneumatic Conveying Printing Based on Super Hydrophobic Surface. Advanced Materials Interfaces 7:9.
Crossref
Jongbeom Ku, Hoon Seonwoo, Sangbae Park, Kyoung-Je Jang, Juo Lee, Myungchul Lee, Jae Woon Lim, Jangho Kim & Jong Hoon Chung. (2020) Cell-Laden Thermosensitive Chitosan Hydrogel Bioinks for 3D Bioprinting Applications. Applied Sciences 10:7, pages 2455.
Crossref
Wang Yiwei, Bao Weijie, Wang Fei, Zhang Haiyi, Wang Zhihai & Wang Yaohong. (2020) Generation of micro-droplet on demand with reduced sizes by a hybrid pneumatic electrohydrodynamic method. Journal of Micromechanics and Microengineering 30:3, pages 035002.
Crossref
Wei Long Ng, Jia Min Lee, Miaomiao Zhou, Yi-Wen Chen, Kai-Xing Alvin Lee, Wai Yee Yeong & Yu-Fang Shen. (2020) Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges. Biofabrication 12:2, pages 022001.
Crossref
Claudia Backes, Amr M Abdelkader, Concepción Alonso, Amandine Andrieux-Ledier, Raul Arenal, Jon Azpeitia, Nilanthy Balakrishnan, Luca Banszerus, Julien Barjon, Ruben Bartali, Sebastiano Bellani, Claire Berger, Reinhard Berger, M M Bernal Ortega, Carlo Bernard, Peter H Beton, André Beyer, Alberto Bianco, Peter Bøggild, Francesco Bonaccorso, Gabriela Borin Barin, Cristina Botas, Rebeca A Bueno, Daniel Carriazo, Andres Castellanos-Gomez, Meganne Christian, Artur Ciesielski, Tymoteusz Ciuk, Matthew T Cole, Jonathan Coleman, Camilla Coletti, Luigi Crema, Huanyao Cun, Daniela Dasler, Domenico De Fazio, Noel Díez, Simon Drieschner, Georg S Duesberg, Roman Fasel, Xinliang Feng, Alberto Fina, Stiven Forti, Costas Galiotis, Giovanni Garberoglio, Jorge M García, Jose Antonio Garrido, Marco Gibertini, Armin Gölzhäuser, Julio Gómez, Thomas Greber, Frank Hauke, Adrian Hemmi, Irene Hernandez-Rodriguez, Andreas Hirsch, Stephen A Hodge, Yves Huttel, Peter U Jepsen, Ignacio Jimenez, Ute Kaiser, Tommi Kaplas, HoKwon Kim, Andras Kis, Konstantinos Papagelis, Kostas Kostarelos, Aleksandra Krajewska, Kangho Lee, Changfeng Li, Harri Lipsanen, Andrea Liscio, Martin R Lohe, Annick Loiseau, Lucia Lombardi, Maria Francisca López, Oliver Martin, Cristina Martín, Lidia Martínez, Jose Angel Martin-Gago, José Ignacio Martínez, Nicola Marzari, Álvaro Mayoral, John McManus, Manuela Melucci, Javier Méndez, Cesar Merino, Pablo Merino, Andreas P Meyer, Elisa Miniussi, Vaidotas Miseikis, Neeraj Mishra, Vittorio Morandi, Carmen Munuera, Roberto Muñoz, Hugo Nolan, Luca Ortolani, Anna K Ott, Irene Palacio, Vincenzo Palermo, John Parthenios, Iwona Pasternak, Amalia Patane, Maurizio Prato, Henri Prevost, Vladimir Prudkovskiy, Nicola Pugno, Teófilo Rojo, Antonio Rossi, Pascal Ruffieux, Paolo Samorì, Léonard Schué, Eki Setijadi, Thomas Seyller, Giorgio Speranza, Christoph Stampfer, Ingrid Stenger, Wlodek Strupinski, Yuri Svirko, Simone Taioli, Kenneth B K Teo, Matteo Testi, Flavia Tomarchio, Mauro Tortello, Emanuele Treossi, Andrey Turchanin, Ester Vazquez, Elvira Villaro, Patrick R Whelan, Zhenyuan Xia, Rositza Yakimova, Sheng Yang, G Reza Yazdi, Chanyoung Yim, Duhee Yoon, Xianghui Zhang, Xiaodong Zhuang, Luigi Colombo, Andrea C Ferrari & Mar Garcia-Hernandez. (2020) Production and processing of graphene and related materials. 2D Materials 7:2, pages 022001.
Crossref
Srimanta Barui, Rachel E. Saunders, Sharmistha Naskar, Bikramjit Basu & Brian Derby. (2019) Acoustic Poration and Dynamic Healing of Mammalian Cell Membranes during Inkjet Printing. ACS Biomaterials Science & Engineering 6:1, pages 749-757.
Crossref
Qin Lian, Linian Zhou, Xiao Li, Wei Mao & Dichen Li. (2020) Perfusive and osmotic capabilities of 3D printed hollow tube for fabricating large-scaled muscle scaffold. Rapid Prototyping Journal 26:1, pages 1-10.
Crossref
Ishita Matai, Gurvinder Kaur, Amir Seyedsalehi, Aneesah McClinton & Cato T. Laurencin. (2020) Progress in 3D bioprinting technology for tissue/organ regenerative engineering. Biomaterials 226, pages 119536.
Crossref
Farzaneh Khamseh, Shahin Bonakdar, Mohammad Hossein Alaei & Soheila Pourkhodadad. 2020. Nanoengineering in Musculoskeletal Regeneration. Nanoengineering in Musculoskeletal Regeneration 137 157 .
Emal Lesha, Sheyda Darouie, Amir Seyfoori, Alireza Dolatshahi-Pirouz & Mohsen Akbari. 2020. Biomaterials for Organ and Tissue Regeneration. Biomaterials for Organ and Tissue Regeneration 629 668 .
Erik SeedhouseErik Seedhouse. 2020. Life Support Systems for Humans in Space. Life Support Systems for Humans in Space 257 284 .
Omaer Syed, Chris Chapman, Catalina Vallejo-Giraldo, Martina Genta, Josef Goding, Emmanuel Kanelos & Rylie Green. 2020. Neural Interface Engineering. Neural Interface Engineering 201 236 .
Tuser T. Biswas, Junchun Yu & Vincent A. Nierstrasz. (2019) Effects of ink characteristics and piezo-electric inkjetting parameters on lysozyme activity. Scientific Reports 9:1.
Crossref
Zeming Gu, Jianzhong Fu, Hui Lin & Yong He. (2019) Development of 3D bioprinting: From printing methods to biomedical applications. Asian Journal of Pharmaceutical Sciences.
Crossref
Minxiang Zeng & Yanliang Zhang. (2019) Colloidal nanoparticle inks for printing functional devices: emerging trends and future prospects. Journal of Materials Chemistry A 7:41, pages 23301-23336.
Crossref
Christina Kryou, Valentina Leva, Marianneza Chatzipetrou & Ioanna Zergioti. (2019) Bioprinting for Liver Transplantation. Bioengineering 6:4, pages 95.
Crossref
Hengyu Li, Junkao Liu, Kai Li & Yingxiang Liu. (2019) Piezoelectric micro-jet devices: A review. Sensors and Actuators A: Physical 297, pages 111552.
Crossref
Wei Long Ng, Chee Kai Chua & Yu-Fang Shen. (2019) Print Me An Organ! Why We Are Not There Yet. Progress in Polymer Science 97, pages 101145.
Crossref
Amid Shakeri, Sara M. Imani, Eric Chen, Hanie Yousefi, Raed Shabbir & Tohid F. Didar. (2019) Plasma-induced covalent immobilization and patterning of bioactive species in microfluidic devices. Lab on a Chip 19:18, pages 3104-3115.
Crossref
Wenhan Lee, Yi Hong & Guohao Dai. (2019) 3D bioprinting of vascular conduits for pediatric congenital heart repairs. Translational Research 211, pages 35-45.
Crossref
Amoljit Singh Gill, Parneet Kaur Deol & Indu Pal Kaur. (2019) An Update on the Use of Alginate in Additive Biofabrication Techniques. Current Pharmaceutical Design 25:11, pages 1249-1264.
Crossref
Sara Romanazzo, Stephanie Nemec & Iman Roohani. (2019) iPSC Bioprinting: Where are We at?. Materials 12:15, pages 2453.
Crossref
Srimanta Barui, Asish K. Panda, S. Naskar, R. Kuppuraj, Saptarshi Basu & Bikramjit Basu. (2019) 3D inkjet printing of biomaterials with strength reliability and cytocompatibility: Quantitative process strategy for Ti-6Al-4V. Biomaterials 213, pages 119212.
Crossref
G. Cidonio, M. Glinka, J.I. Dawson & R.O.C. Oreffo. (2019) The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine. Biomaterials 209, pages 10-24.
Crossref
Shangkun Wang, Yonghong Zhong & Haisheng Fang. (2019) Deformation characteristics of a single droplet driven by a piezoelectric nozzle of the drop-on-demand inkjet system. Journal of Fluid Mechanics 869, pages 634-645.
Crossref
Pei Zhuang, Wei Long Ng, Jia An, Chee Kai Chua & Lay Poh Tan. (2019) Layer-by-layer ultraviolet assisted extrusion-based (UAE) bioprinting of hydrogel constructs with high aspect ratio for soft tissue engineering applications. PLOS ONE 14:6, pages e0216776.
Crossref
Amir K. Miri, Iman Mirzaee, Shabir Hassan, Shirin Mesbah Oskui, Daniel Nieto, Ali Khademhosseini & Yu Shrike Zhang. (2019) Effective bioprinting resolution in tissue model fabrication. Lab on a Chip 19:11, pages 2019-2037.
Crossref
Shreya Mehrotra, Joseph Christakiran Moses, Ashutosh Bandyopadhyay & Biman B. Mandal. (2019) 3D Printing/Bioprinting Based Tailoring of in Vitro Tissue Models: Recent Advances and Challenges . ACS Applied Bio Materials 2:4, pages 1385-1405.
Crossref
Farzad Koosha, Daniel Silverman, Stephanie Taboada, Juyi Li & Miriam Rafailovich. (2019) Evaluation of Rheological Properties and Cytotoxicity of Bioinks. MRS Advances 4:22, pages 1275-1283.
Crossref
Yuanyuan Liu & Brian Derby. (2019) Experimental study of the parameters for stable drop-on-demand inkjet performance. Physics of Fluids 31:3.
Crossref
Rania Abdelgaber, David Kilian & Hendrik Fiehn. 2019. 3D and 4D Printing in Biomedical Applications. 3D and 4D Printing in Biomedical Applications 113 143 .
Juanjuan Wu, Ying Yan, Lijing Zhang, Zizhen Qin & Shengyang Tao. (2018) Enhanced Mass Transfer and Improved Catalyst Recovery in a Stirred Reactor by Polymeric Ionic Liquids Modified 3D Printed Devices. Advanced Materials Technologies 4:2.
Crossref
Shweta Anil Kumar, Monica Delgado, Victor E Mendez & Binata Joddar. (2019) Applications of stem cells and bioprinting for potential treatment of diabetes. World Journal of Stem Cells 11:1, pages 13-33.
Crossref
Ranjit Barua, Sudipto Datta, Pallab Datta & Amit Roy Chowdhury. 2019. Design, Development, and Optimization of Bio-Mechatronic Engineering Products. Design, Development, and Optimization of Bio-Mechatronic Engineering Products 78 99 .
Nelson Castro, Nelson Pereira, Vanessa F. Cardoso, Clarisse Ribeiro & Senentxu Lanceros-Mendez. 2019. Nanostructured Thin Films. Nanostructured Thin Films 35 65 .
Paula Camacho, Hafiz Busari, Kelly B. Seims, John W. Tolbert & Lesley W. Chow. 2019. 3D Bioprinting in Medicine. 3D Bioprinting in Medicine 67 100 .
Christopher B. Highley. 2019. 3D Bioprinting in Medicine. 3D Bioprinting in Medicine 1 66 .
Assaf Shapira, Nadav Noor, Masha Asulin & Tal Dvir. (2018) Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering. Applied Physics Reviews 5:4, pages 041112.
Crossref
Huijun Li, Cavin Tan & Lin Li. (2018) Review of 3D printable hydrogels and constructs. Materials & Design 159, pages 20-38.
Crossref
J.S. Gebauer, V. Mackert, S. Ognjanović & M. Winterer. (2018) Tailoring metal oxide nanoparticle dispersions for inkjet printing. Journal of Colloid and Interface Science 526, pages 400-409.
Crossref
Gareth Turnbull, Jon Clarke, Frédéric Picard, Philip Riches, Luanluan Jia, Fengxuan Han, Bin Li & Wenmiao Shu. (2018) 3D bioactive composite scaffolds for bone tissue engineering. Bioactive Materials 3:3, pages 278-314.
Crossref
Dorothea Paulssen, Wenqian Feng, Ivana Pini & Pavel A. Levkin. (2018) Formation of Liquid–Liquid Micropatterns through Guided Liquid Displacement on Liquid‐Infused Surfaces. Advanced Materials Interfaces 5:18.
Crossref
Muhammad Wajid Ullah, Zhijun Shi, Sehrish Manan & Guang Yang. 2018. Bioinspired Materials Science and Engineering. Bioinspired Materials Science and Engineering 1 16 .
Yanzhen Zhang, Dege Li, Yonghong Liu & Gunther Wittstock. (2018) Inkjet Printing in Liquid Environments. Small 14:27, pages 1801212.
Crossref
Johan Göhl, Kajsa Markstedt, Andreas Mark, Karl Håkansson, Paul Gatenholm & Fredrik Edelvik. (2018) Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks. Biofabrication 10:3, pages 034105.
Crossref
Soroosh Derakhshanfar, Rene Mbeleck, Kaige Xu, Xingying Zhang, Wen Zhong & Malcolm Xing. (2018) 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances. Bioactive Materials 3:2, pages 144-156.
Crossref
Olayinka Oderinde, Shunli Liu, Kewen Li, Mengmeng Kang, Hussain Imtiaz, Fang Yao & Guodong Fu. (2018) Multifaceted polymeric materials in three‐dimensional processing (3DP) technologies: Current progress and prospects. Polymers for Advanced Technologies 29:6, pages 1586-1602.
Crossref
Yongxiang Luo, Xin Lin & Peng Huang. (2018) 3D Bioprinting of Artificial Tissues: Construction of Biomimetic Microstructures. Macromolecular Bioscience 18:6, pages 1800034.
Crossref
Yingying Chen, Peng Gao, Mark J. Summe, William A. Phillip & Na Wei. (2018) Biocatalytic membranes prepared by inkjet printing functionalized yeast cells onto microfiltration substrates. Journal of Membrane Science 550, pages 91-100.
Crossref
Zhonghui Du, Xinhong Yu & Yanchun Han. (2018) Inkjet printing of viscoelastic polymer inks. Chinese Chemical Letters 29:3, pages 399-404.
Crossref
Bin Zhang, Yichen Luo, Liang Ma, Lei Gao, Yuting Li, Qian Xue, Huayong Yang & Zhanfeng Cui. (2018) 3D bioprinting: an emerging technology full of opportunities and challenges. Bio-Design and Manufacturing 1:1, pages 2-13.
Crossref
Waeljumah Aljohani, Muhammad Wajid Ullah, Xianglin Zhang & Guang Yang. (2018) Bioprinting and its applications in tissue engineering and regenerative medicine. International Journal of Biological Macromolecules 107, pages 261-275.
Crossref
Kai Li, Jun-kao Liu, Wei-shan Chen & Lu Zhang. (2017) Controllable printing droplets on demand by piezoelectric inkjet: applications and methods. Microsystem Technologies 24:2, pages 879-889.
Crossref
Hany Anany, Lubov Brovko, Noha K. El Dougdoug, Jennifer Sohar, Heather Fenn, Nada Alasiri, Tarik Jabrane, Patrice Mangin, M. Monsur Ali, Balamurali Kannan, Carlos D. M. Filipe & Mansel W. Griffiths. (2017) Print to detect: a rapid and ultrasensitive phage-based dipstick assay for foodborne pathogens. Analytical and Bioanalytical Chemistry 410:4, pages 1217-1230.
Crossref
Rouhollah Dermanaki Farahani & Martine Dubé. (2018) Printing Polymer Nanocomposites and Composites in Three Dimensions. Advanced Engineering Materials 20:2, pages 1700539.
Crossref

Displaying 200 of 239 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.