387
Views
21
CrossRef citations to date
0
Altmetric
Advances in electron backscatter diffraction

Use of EBSD to characterise high temperature oxides formed on low alloy and stainless steels

Pages 1325-1332 | Published online: 19 Jul 2013

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (4)

Y. Y. Yue, C. J. Liu, P. Y. Shi & M. F. Jiang. (2016) Corrosion of hot-rolled 430 stainless steel in HCl-based solution. Corrosion Engineering, Science and Technology 51:8, pages 581-587.
Read now
V. F. Lay, R. L. Higginson, S. C. Hogg, C. A. Kirk & C. Davis. (2015) Analysis of deposits formed during biomass co-firing on 15Mo3 under different gas and temperature conditions. Materials at High Temperatures 32:1-2, pages 230-237.
Read now
R.L. Higginson, L. Millar, G. West & J. Hulance. (2011) The effect of alloying additions on the oxide morphologies of super-heater tubes at elevated temperatures. Materials at High Temperatures 28:4, pages 279-284.
Read now
R.L. Higginson & M.A.E. Jepson. (2009) Oxidation characteristics of two As-cast duplex stainless steels under simulated reheat conditions. Materials at High Temperatures 26:1, pages 25-30.
Read now

Articles from other publishers (17)

Jean Rodier & Vincent Serneels. (2023) Geochemical Link Between Slag Inclusion and Hammerscale, a Potential New Tool to Better Understand the Iron Supply of an Archaeological Workshop. Metallography, Microstructure, and Analysis 12:2, pages 312-326.
Crossref
Baozhen Jiang, Kotaro Doi & Koichi Tsuchiya. (2023) Characterization of microstructures and micromechanical properties of naturally generated rust layer in 60-year old reinforced concrete. Construction and Building Materials 366, pages 130203.
Crossref
Ali Vedaei-Sabegh, Jean-Benoît Morin & Mohammad Jahazi. (2022) Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots. Materials Chemistry and Physics 275, pages 125269.
Crossref
Kaushal Kishore, Sumit Chhangani, M.J.N.V. Prasad & K. Bhanumurthy. (2021) Microstructure evolution and hardness of hot dip aluminized coating on pure iron and EUROFER 97 steel: Effect of substrate chemistry and heat treatment. Surface and Coatings Technology 409, pages 126783.
Crossref
Baozhen Jiang, Kotaro Doi, Koichi Tsuchiya, Yutaka Kawano, Ami Kori & Kenji Ikushima. (2020) Micromechanical properties of steel corrosion products in concrete studied by nano-indentation technique. Corrosion Science 163, pages 108304.
Crossref
Y. Rae, X. Guo, A. Benaarbia, N. Neate & W. Sun. (2020) On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature. Materials Science and Engineering: A 773, pages 138864.
Crossref
Bach H. Tran, Kiet Tieu, Shanhong Wan & Hongtao Zhu. (2019) Lubricant as a sticking-scale inhibitor on high temperature sliding contact. Tribology International 140, pages 105860.
Crossref
Sheng-Yao Huang, Wen-Ta Tsai, Yeong-Tsuen Pan, Jui-Chao Kuo, Hsien-Wei Chen & Dong-Yih Lin. (2019) Effect of Niobium Addition on the High-Temperature Oxidation Behavior of 22Cr25NiWCoCu Stainless Steel in Air. Metals 9:9, pages 975.
Crossref
Hong-ying Sun, Qiang He, Zhang-jian Zhou, Man Wang, Guang-ming Zhang & Shao-fu Li. (2016) Effects of solution depletion and segregation oxidation on morphology of modified 310 austenitic stainless steel. Journal of Iron and Steel Research International 23:4, pages 393-400.
Crossref
Peeraya Pipatnukun, Panyawat Wangyao & Gobboon Lothongkum. (2015) Oxidation behavior of 26Cr-16Ni and AISI 309 austenitic stainless steels in air flow at 1,173 K. Materials Testing 57:7-8, pages 597-601.
Crossref
R. Sánchez-Tovar, R. Leiva-García & J. García-Antón. (2015) Characterization of thermal oxide films formed on a duplex stainless steel by means of confocal-Raman microscopy and electrochemical techniques. Thin Solid Films 576, pages 1-10.
Crossref
Juntao Yuan, Wen Wang, Shenglong Zhu & Fuhui Wang. (2013) Comparison between the oxidation of iron in oxygen and in steam at 650–750°C. Corrosion Science 75, pages 309-317.
Crossref
M.A.E. Jepson & R.L. Higginson. (2012) In situ observation of the oxidation of S32101 duplex stainless steel at 900?C. Corrosion Science 59, pages 263-269.
Crossref
R.L. Higginson & G. Green. (2011) Whisker growth morphology of high temperature oxides grown on 304 stainless steel. Corrosion Science 53:5, pages 1690-1693.
Crossref
Qiumin Jin, Jun Li, Yulai Xu, Xueshan Xiao, Wei Zhang & Laizhu Jiang. (2010) High-temperature oxidation of duplex stainless steels S32101 and S32304 in air and simulated industrial reheating atmosphere. Corrosion Science 52:9, pages 2846-2854.
Crossref
M.A.E. Jepson & R.L. Higginson. (2009) The influence of microstructure on the oxidation of duplex stainless steels in simulated propane combustion products at 1000?C. Corrosion Science 51:3, pages 588-594.
Crossref
R.Y. Chen & W.Y.D. Yuen. 2008. Developments in High Temperature Corrosion and Protection of Materials. Developments in High Temperature Corrosion and Protection of Materials 192 252 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.