Citations (25)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
M. Okayasu, S. Wu, T. Hirayama & Y.-S. Lee. (2018) Method for reducing aluminum alloy heat loss in high pressure die casting shot sleeves. International Journal of Cast Metals Research 31:5, pages 308-316.
Read now
Read now
Articles from other publishers (24)
Nicole Trometer, Larry A. Godlewski, Eben Prabhu, Marcus Schopen & Alan A. Luo. (2023) Effect of Vacuum on Die Filling in High Pressure Die Casting: Water Analog, Process Simulation and Casting Validation. International Journal of Metalcasting.
Crossref
Crossref
Abhinav Anand, Devarajan Nagarajan, Mohamed El Mansori & Tharmalingam Sivarupan. (2022) Integration of Additive Fabrication with High-Pressure Die Casting for Quality Structural Castings of Aluminium Alloys; Optimising Energy Consumption. Transactions of the Indian Institute of Metals 76:2, pages 347-379.
Crossref
Crossref
Agnes M. Samuel, Yasser Zedan, Ehab A. Elsharkawi, Mohamed H. Abdelaziz & Fawzy H. Samuel. (2022) The Role of Mg Content and Aging Treatment on the Tensile and Fatigue Properties of Die-Cast 380 Alloy. Materials 15:24, pages 8844.
Crossref
Crossref
L.H. Liu, W.J. Gao, X.S. Huang, T. Zhang, Z.Y. Liu, C. Yang, W.W. Zhang, W.R. Li, L. Li & P.J. Li. (2022) Shear-accelerated crystallization of glass-forming metallic liquids in high-pressure die casting. Journal of Materials Science & Technology 117, pages 146-157.
Crossref
Crossref
Mark Jolly & Laurens Katgerman. (2022) Modelling of defects in aluminium cast products. Progress in Materials Science 123, pages 100824.
Crossref
Crossref
Xinping Hu, Ruixin Li & Qing Wang. (2021) Cross-section Effect on Mechanical Properties of Al A356 Alloy Tensile Specimens. Journal of Physics: Conference Series 1939:1, pages 012031.
Crossref
Crossref
Joshua Stroh, Dimitry Sediako, Ted Hanes, Kevin Anderson & Alex Monroe. (2021) The Effects of Heat Treatment on the Microstructure and Tensile Properties of an HPDC Marine Transmission Gearcase. Metals 11:3, pages 517.
Crossref
Crossref
Yijie Zhang, Ewan Lordan, Kun Dou, Shihao Wang & Zhongyun Fan. (2020) Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys. Journal of Manufacturing Processes 56, pages 500-509.
Crossref
Crossref
K Dou, E Lordan, Y J Zhang, A Jacot & Z Y Fan. (2019) Numerical simulation of fluid flow, solidification and defects in high pressure die casting (HPDC) process. IOP Conference Series: Materials Science and Engineering 529:1, pages 012058.
Crossref
Crossref
Elena Fiorese, Franco Bonollo & Eleonora Battaglia. (2018) A Tool for Predicting the Effect of the Plunger Motion Profile on the Static Properties of Aluminium High Pressure Die Cast Components. Metals 8:10, pages 798.
Crossref
Crossref
Dhrub Prasad & Sanatan Ratna. (2018) Decision support systems in the metal casting industry: An academic review of research articles. Materials Today: Proceedings 5:1, pages 1298-1312.
Crossref
Crossref
Elena Fiorese, Dario Richiedei & Franco Bonollo. (2016) Analytical computation and experimental assessment of the effect of the plunger speed on tensile properties in high-pressure die casting. The International Journal of Advanced Manufacturing Technology 91:1-4, pages 463-476.
Crossref
Crossref
Elena Fiorese, Dario Richiedei & Franco Bonollo. (2016) Improving the quality of die castings through optimal plunger motion planning: analytical computation and experimental validation. The International Journal of Advanced Manufacturing Technology 88:5-8, pages 1475-1484.
Crossref
Crossref
Elena Fiorese & Franco Bonollo. (2016) Simultaneous Effect of Plunger Motion Profile, Pressure, and Temperature on the Quality of High-Pressure Die-Cast Aluminum Alloys. Metallurgical and Materials Transactions A 47:12, pages 6453-6465.
Crossref
Crossref
Elena Fiorese & Franco Bonollo. (2016) Plunger Kinematic Parameters Affecting Quality of High-Pressure Die-Cast Aluminum Alloys. Metallurgical and Materials Transactions A 47:7, pages 3731-3743.
Crossref
Crossref
Franco Bonollo, Nicola Gramegna & Giulio Timelli. (2015) High-Pressure Die-Casting: Contradictions and Challenges. JOM 67:5, pages 901-908.
Crossref
Crossref
Anilchandra R. Adamane, Lars Arnberg, Elena Fiorese, Giulio Timelli & Franco Bonollo. (2015) Influence of Injection Parameters on the Porosity and Tensile Properties of High-Pressure Die Cast Al-Si Alloys: A Review. International Journal of Metalcasting 9:1, pages 43-53.
Crossref
Crossref
Miroslav Rimar, Marcel Fedak, Janka Mihalcova & Stefan Kuna. (2015) Adaptive Rejection Filter for the Drives Stabilization of Pressure Die Casting Machines. Advances in Mechanical Engineering 6, pages 453724.
Crossref
Crossref
D.R. Gunasegaram, M. Givord, R.G. O'Donnell & B.R. Finnin. (2013) Improvements engineered in UTS and elongation of aluminum alloy high pressure die castings through the alteration of runner geometry and plunger velocity. Materials Science and Engineering: A 559, pages 276-286.
Crossref
Crossref
Petr Kotas, Cem Celal Tutum, Jesper Thorborg & Jesper Henri Hattel. (2011) Elimination of Hot Tears in Steel Castings by Means of Solidification Pattern Optimization. Metallurgical and Materials Transactions B 43:3, pages 609-626.
Crossref
Crossref
Somsak Prasertsook. (2011) Non Ferrous Melting by Gas. Applied Mechanics and Materials 66-68, pages 50-53.
Crossref
Crossref
R. Lumley, N. Deeva & M. Gershenzon. (2015) An Evaluation of Quality Parameters for High Pressure Die Castings. International Journal of Metalcasting 5:3, pages 37-56.
Crossref
Crossref
M.T. Murray & M. Murray. 2011. Fundamentals of Aluminium Metallurgy. Fundamentals of Aluminium Metallurgy
217
261
.
S. Otarawanna, H.I. Laukli, C.M. Gourlay & A.K. Dahle. (2010) Feeding Mechanisms in High-Pressure Die Castings. Metallurgical and Materials Transactions A 41:7, pages 1836-1846.
Crossref
Crossref