Citations (35)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Majid Pouranvari. (2021) Critical review on fusion welding of magnesium alloys: metallurgical challenges and opportunities. Science and Technology of Welding and Joining 26:8, pages 559-580.
Read now
Read now
M. Pouranvari, H. Jiryaei Sharahi & M. Movahedi. (2020) Effect of liquation on the tensile properties of cast Mg–9Al–1Zn Alloy fusion welds. Science and Technology of Welding and Joining 25:8, pages 698-705.
Read now
Read now
Kun Liu & Sindo Kou. (2020) Susceptibility of magnesium alloys to solidification cracking. Science and Technology of Welding and Joining 25:3, pages 251-257.
Read now
Read now
Z. M. Yang, H. G. Yan, J. H. Chen, B. Su, G. H. Zhang & Q. Zhao. (2015) Microstructural characterisation and liquation behaviour of laser welded joint of fine grained AZ91 magnesium alloy thin sheets. Science and Technology of Welding and Joining 20:1, pages 27-34.
Read now
Read now
M. Sheikhi, F. Malek Ghaini & H. Assadi. (2014) Solidification crack initiation and propagation in pulsed laser welding of wrought heat treatable aluminium alloy. Science and Technology of Welding and Joining 19:3, pages 250-255.
Read now
Read now
X L Chen, H G Yan, J H Chen, B Su & Z H Yu. (2013) Effects of grain size and precipitation on liquation cracking of AZ61 magnesium alloy laser welding joints. Science and Technology of Welding and Joining 18:6, pages 458-465.
Read now
Read now
F D’Elia, C Ravindran & K Prasad Rao. (2012) Evaluation of hot cracking in AZ91E and AE42 magnesium alloys. Canadian Metallurgical Quarterly 51:3, pages 346-355.
Read now
Read now
Andrew Wisbey. (2008) Evidence for entrainment defects. Materials Science and Technology 24:7, pages 875-881.
Read now
Read now
Articles from other publishers (27)
Zhongrui Zhang, Junqi Shen, Shengsun Hu, Yang Chen, Chengxuan Yin & Xianzheng Bu. (2023) Optimization of CMT Characteristic Parameters for Swing Arc Additive Manufacturing of AZ91 Magnesium Alloy Based on Process Stability Analysis. Materials 16:8, pages 3236.
Crossref
Crossref
Jingliang Fu, Zhihua Wang, Wei Liu, Jiong Yuan, Chenpeng Jia & Lijun Yang. (2023) Effects of heat input on microstructures and mechanical properties of LAZ931 magnesium-lithium alloy by CO2 laser welding. Materials Today Communications, pages 105536.
Crossref
Crossref
Yi Chen, Chenglei Fan, Sanbao Lin & Chunli Yang. (2022) Effect of Tungsten Inert Gas Welding Parameters on Hot Crack Sensitivity of Cast Magnesium Alloy. Journal of Materials Engineering and Performance 32:3, pages 1382-1389.
Crossref
Crossref
Hailong Lu, Xiaobin Zhang, Pengfei Zhao & Shuwang Bian. (2022) Effect of pulse overlap rate on the microstructure and mechanical properties of laser welds of thin AZ31 magnesium alloy. Materials Research Express 9:11, pages 116502.
Crossref
Crossref
Wei Zhou, Aprilia Aprilia & Chee Kong Mark. (2021) Mechanisms of Cracking in Laser Welding of Magnesium Alloy AZ91D. Metals 11:7, pages 1127.
Crossref
Crossref
Desmond Edem Primus Klenam, Gabriel Seun Ogunwande, Taiwo Omotosho, Blessing Ozah, Nthabiseng Beauty Maledi, Silas Ithete Hango, Adefunke Abosede Fabuyide, Lesego Mohlala, Josias Willem van der Merwe & Michael Oluwatosin Bodunrin. (2021) Welding of magnesium and its alloys: an overview of methods and process parameters and their effects on mechanical behaviour and structural integrity of the welds. Manufacturing Review 8, pages 29.
Crossref
Crossref
Suryakanta Sahu, Surjya Kanta Pal, Mahadev Shome & Prakash Srirangam. 2021. Welding Technology. Welding Technology
167
192
.
Tao Yuan, Wentao Gong, Yinuo Li & Shujun Chen. 2018. Light Metals 2018. Light Metals 2018
401
407
.
G. M. Karthik, G. D. Janaki Ram & Ravi Sankar Kottada. (2017) Use of Friction Stir Processing for Improving Heat-Affected Zone Liquation Cracking Resistance of a Cast Magnesium Alloy AZ91D. Metallurgical and Materials Transactions B 48:6, pages 3270-3280.
Crossref
Crossref
Behzad Hassani, Fathallah Karimzadeh, Mohammad Hossein Enayati, Soheil Sabooni & Rudolf Vallant. (2016) Effect of Friction Stir Processing on Microstructure and Mechanical Properties of AZ91C Magnesium Cast Alloy Weld Zone. Journal of Materials Engineering and Performance 25:7, pages 2776-2785.
Crossref
Crossref
A. Shanmugasundaram, A.K. Lakshminarayanan & V.E. Annamalai. (2015) Microstructure and Tensile Properties of Friction Stir and Gas Tungsten Arc Welded AZ91D Magnesium Alloy Joints. Applied Mechanics and Materials 787, pages 470-474.
Crossref
Crossref
Tao Yuan, Xiao Chai, Zhen Luo & Sindo Kou. (2015) Predicting susceptibility of magnesium alloys to weld-edge cracking. Acta Materialia 90, pages 242-251.
Crossref
Crossref
Dustin C. Wagner, Xiao Chai, Xin Tang & Sindo Kou. (2014) Liquation Cracking in Arc and Friction-Stir Welding of Mg-Zn Alloys. Metallurgical and Materials Transactions A 46:1, pages 315-327.
Crossref
Crossref
Bilge Demir & Ahmet Durgutlu. (2014) An Investigation of TIG Welding of AZ31 Magnesium Alloy Sheets*. Materials Testing 56:10, pages 847-851.
Crossref
Crossref
Y.C. Guan, W. Zhou, Z.L. Li & H.Y. Zheng. (2014) Laser-induced microstructural development and phase evolution in magnesium alloy. Journal of Alloys and Compounds 582, pages 491-495.
Crossref
Crossref
Y.C. Guan, W. Zhou, Z.L. Li & H.Y. Zheng. (2013) Influence of overlapping tracks on microstructure evolution and corrosion behavior in laser-melt magnesium alloy. Materials & Design (1980-2015) 52, pages 452-458.
Crossref
Crossref
S. Rajakumar, V. Balasubramanian & A. Razalrose. (2013) Friction stir and pulsed current gas metal arc welding of AZ61A magnesium alloy: A comparative study. Materials & Design 49, pages 267-278.
Crossref
Crossref
Ying Chun Guan & Wei Zhou. (2013) Effect of Intermetallic β-Mg<sub>17</sub>Al<sub>12</sub> on Fracture of Ultralight Magnesium Alloy. Key Engineering Materials 535-536, pages 160-163.
Crossref
Crossref
Mahadzir Ishak, Kazuhiko Yamasaki & Katsuhiro Maekawa. 2013. Experimental and Numerical Investigation of Advanced Materials and Structures. Experimental and Numerical Investigation of Advanced Materials and Structures
147
160
.
A. Razal Rose, K. Manisekar, V. Balasubramanian & S. Rajakumar. (2012) Prediction and optimization of pulsed current tungsten inert gas welding parameters to attain maximum tensile strength in AZ61A magnesium alloy. Materials & Design 37, pages 334-348.
Crossref
Crossref
G. Padmanaban & V. Balasubramanian. (2011) Metallurgical characterization of pulsed current gas tungsten arc, friction stir and laser beam welded AZ31B magnesium alloy joints. Materials Chemistry and Physics 125:3, pages 686-697.
Crossref
Crossref
S. Kou, V. Firouzdor & I.W. Haygood. 2011. Hot Cracking Phenomena in Welds III. Hot Cracking Phenomena in Welds III
3
23
.
Y. C. Guan, W. Zhou, H. Y. Zheng & Z. L. Li. (2010) Solidification microstructure of AZ91D Mg alloy after laser surface melting. Applied Physics A 101:2, pages 339-344.
Crossref
Crossref
Ying Chun Guan, Wei Zhou, Hong Yu ZhengZhong Li Li. (2010) Surface Modification of AZ91D Magnesium Alloy Using Millisecond, Nanosecond and Femtosecond Lasers. Key Engineering Materials 447-448, pages 695-699.
Crossref
Crossref
G. Padmanaban, V. Balasubramanian & J. K. Sarin Sundar. (2009) Influences of Welding Processes on Microstructure, Hardness, and Tensile Properties of AZ31B Magnesium Alloy. Journal of Materials Engineering and Performance 19:2, pages 155-165.
Crossref
Crossref
L. F. CAI, C. K. MARK & WEI ZHOU. (2012) LASER CLADDING OF MAGNESIUM ALLOY AZ91D WITH SILICON CARBIDE. Surface Review and Letters 16:02, pages 215-221.
Crossref
Crossref
De Xin Sun, Da Qian Sun, Xiao Yan Gu & Zhao Zhi Xuan. (2009) Hot Cracking of Metal Inert Gas Arc Welded Magnesium Alloy AZ91D. ISIJ International 49:2, pages 270-274.
Crossref
Crossref