Advanced search
Publication Cover
Materials Science and Technology Volume 27, 2011 - Issue 10
Journal homepage
422
Views
27
CrossRef citations to date
0
Altmetric
Original Article

A model for determining initial dislocation-densities associated with martensitic transformations

T M HatemDepartment of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC27695-7910, USA
&
M A ZikryDepartment of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC27695-7910, USACorrespondence[email protected]
Pages 1570-1573 | Received 06 Jun 2011, Accepted 30 Jul 2011, Published online: 12 Nov 2013

Citations (27)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Hyeonseok Kwon, Stefanus Harjo, Takuro Kawasaki, Wu Gong, Sang Guk Jeong, Eun Seong Kim, Praveen Sathiyamoorthi, Hidemi Kato & Hyoung Seop Kim. (2022) Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis. Science and Technology of Advanced Materials 23:1, pages 579-586.
Read now

Articles from other publishers (26)

Zheng Zhang, Fei Shen & Liao-Liang Ke. (2024) A dislocation density-based crystal plasticity damage model for rolling contact fatigue of gradient grained structures. International Journal of Fatigue 179, pages 108038.
Crossref
Wei Jiang, Kerui Zhu, Jiansheng Li, Wenbo Qin, Jian Zhou, Zhumin Li, Kaixuan Gui, Yu Zhao, Qingzhong Mao & Banglun Wang. (2023) Extraordinary strength and ductility of cold-rolled 304L stainless steel at cryogenic temperature. Journal of Materials Research and Technology.
Crossref
C.P. Huang, M. Wang, K.Y. Zhu, A. Perlade & M.X. Huang. (2023) Carbon-induced negative strain-rate sensitivity in a quenching and partitioning steel. Acta Materialia 255, pages 119099.
Crossref
Li Junkui, Yang Zhinan, Ma Hua, Chen Chen & Zhang Fucheng. (2023) A medium-C martensite steel with 2.6 GPa tensile strength and large ductility. Scripta Materialia 228, pages 115327.
Crossref
Chenghao Song, Zhenshan Zhang, Wenyuan Wu, Haoliang Wang, Zhenzhong Sun, Yuhui Yang, Weifeng He, Juping Xu, Yuanguang Xia, Wen Yin & Zhiyan Cheng. (2023) Effect of Si on the dislocation state within martensite of ultra-high strength hot-rolled medium Mn steel with good ductility. Materials Science and Engineering: A 869, pages 144825.
Crossref
Wei Wang, Yanke Liu, Zihan Zhang, Muxin Yang, Lingling Zhou, Jing Wang, Ping Jiang, Fuping Yuan & Xiaolei Wu. (2023) Deformation mechanisms for a new medium-Mn steel with 1.1 GPa yield strength and 50% uniform elongation. Journal of Materials Science & Technology 132, pages 110-118.
Crossref
Hao Du, Yu Gong, Yuantao Xu, Qiaoshi Zeng, Lianghua Xiong, Yu Li, Yihong Nie, Junfeng Wang & Xuejun Jin. (2022) Obtaining Ultrastrong and Ductile Steel with Hierarchical Lamellar Duplex Phase Microstructure by Two-Stage Martensitic Transformation Mechanism. Metallurgical and Materials Transactions A 53:5, pages 1613-1629.
Crossref
Byungsue Shin, Kwangyuk Kim, Sung Yi, Sanggyu Choi & Soongkeun Hyun. (2021) Microstructure and Mechanical Properties of Cast and Hot-Rolled Medium-Carbon Steels under Isothermal Heat-Treatment Conditions. Metals 11:12, pages 1950.
Crossref
Z.H. Wang, B. Niu, Q. Wang, C. Dong, J.C. Jie, T.M. Wang & T.G. Nieh. (2021) Designing ultrastrong maraging stainless steels with improved uniform plastic strain via controlled precipitation of coherent nanoparticles. Journal of Materials Science & Technology 93, pages 60-70.
Crossref
Eung Hyuk Lee, Chang Jae Yu, Hong-Bum Lee, Ji-Hoon Kim & Dong-Woo Suh. (2021) Influence of Si and Al contents and isothermal treatment condition on the microstructure and tensile properties in ultra-high strength Fe-0.2C-2.0Mn martensite-bainite complex phase steels. Korean Journal of Metals and Materials 59:9, pages 602-612.
Crossref
S.H. Jiang, X.Q. Xu, W. Li, B. Peng, Y. Wu, X.J. Liu, H. Wang, X.Z. Wang & Z.P. Lu. (2021) Strain hardening mediated by coherent nanoprecipitates in ultrahigh-strength steels. Acta Materialia 213, pages 116984.
Crossref
Shu Yan, Tianle Li, Taosha Liang & Xianghua Liu. (2020) Adjusting the microstructure evolution, mechanical properties and deformation behaviors of Fe-5.95Mn-1.55Si-1.03Al-0.055C medium Mn steel by cold-rolling reduction ratio. Journal of Materials Research and Technology 9:2, pages 1314-1324.
Crossref
Xiaoyan Long, Gengcen Zhao, Fucheng Zhang, Shan Xu, Zhinan Yang, Guojun Du & Ricardo Branco. (2020) Evolution of tensile properties with transformation temperature in medium-carbon carbide-free bainitic steel. Materials Science and Engineering: A 775, pages 138964.
Crossref
Mohamed H Hamza, Mohamed A Hendy & Tarek M. Hatem. (2019) Atomistic simulations of hydrogen and carbon segregation in α-iron grain boundaries. IOP Conference Series: Materials Science and Engineering 610:1, pages 012009.
Crossref
Khaled H. Khafagy, Tarek M. Hatem & Salah M. Bedair. (2019) Modelling of III-Nitride Epitaxial Layers Grown on Silicon Substrates with Low Dislocation-Densities. MRS Advances 4:13, pages 755-760.
Crossref
Salma I. Salah, Tarek M. Hatem, Essam E. Khalil & Salah M. Bedair. (2019) Embedded void approach effects on intrinsic stresses in laterally grown GaN-on-Si substrate. Materials Science and Engineering: B 242, pages 104-110.
Crossref
Sougata Roy, George Theng Ching Ooi & Sriram Sundararajan. (2018) Effect of retained austenite on micropitting behavior of carburized AISI 8620 steel under boundary lubrication. Materialia 3, pages 192-201.
Crossref
Mohamed A. Hendy, Tarek M. Hatem & Jaafar A. El-Awady. (2018) Atomistic Simulations of Carbon and Hydrogen Diffusion and Segregation in Alfa-Iron Deviant CSL Grain Boundaries. MRS Advances 3:45-46, pages 2795-2800.
Crossref
George Theng Ching Ooi, Sougata Roy & Sriram Sundararajan. (2018) Investigating the effect of retained austenite and residual stress on rolling contact fatigue of carburized steel with XFEM and experimental approaches. Materials Science and Engineering: A 732, pages 311-319.
Crossref
M.X. Huang & B.B. He. (2018) Alloy design by dislocation engineering. Journal of Materials Science & Technology 34:3, pages 417-420.
Crossref
Khaled H. Khafagy, Tarek M. Hatem & Salah M. Bedair. (2018) Impact of embedded voids on thin-films with high thermal expansion coefficients mismatch. Applied Physics Letters 112:4.
Crossref
Amir Abdelmawla, Tarek M. Hatem & Nasr M. Ghoniem. 2018. TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings 213 223 .
Khaled H. Khafagy, Tarek M. Hatem & Salah M. Bedair. 2018. Energy Technology 2018. Energy Technology 2018 453 461 .
B. B. He, B. Hu, H. W. Yen, G. J. Cheng, Z. K. WangH. W. Luo & M. X. Huang. (2017) High dislocation density–induced large ductility in deformed and partitioned steels. Science 357:6355, pages 1029-1032.
Crossref
P. Shanthraj & M.A. Zikry. (2012) Optimal microstructures for martensitic steels. Journal of Materials Research 27:12, pages 1598-1611.
Crossref
Khaled H. Khafagy & Tarek M. Hatem. (2022) Microstructure Generating Algorithm for Martensitic Alloys: Application to High-Strength Steels. SSRN Electronic Journal.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.