Citations (21)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (2)
G. Sainath, B. K. Choudhary, J. Christopher, E. Isaac Samuel & M. D. Mathew. (2014) Effects of temperature and strain rate on tensile stress–strain and workhardening behaviour of P92 ferritic steel. Materials Science and Technology 30:8, pages 911-920.
Read now
Read now
B.K. Choudhary & D.P. Rao Palaparti. (2013) Influence of processing route and section size on tensile stress–strain and work hardening behaviour of 9Cr–1Mo ferritic steel. Materials at High Temperatures 30:2, pages 129-139.
Read now
Read now
Articles from other publishers (19)
Mehran Ghafouri, Shahriar Afkhami, Aki-Petteri Pokka, Vahid Javaheri, Amir Togiani, Jari Larkiola & Timo Björk. (2024) Effect of temperature on the plastic flow and strain hardening of direct-quenched ultra-high strength steel S960MC. Thin-Walled Structures 194, pages 111319.
Crossref
Crossref
R. Alagesan, A. Rajesh Kannan, N. Siva Shanmugam & K. Sankaranarayanasamy. (2023) Microstructural features and hot tensile behaviour of tungsten inert gas welded TP321 nuclear tubes at elevated temperatures. Engineering Failure Analysis 154, pages 107720.
Crossref
Crossref
Yao Yan, Wei-Dong Song, Ke-Feng Li, Kang Zhao, Tong-Tong Sun, Kai-Kai Song, Jian-Hong Gong & Li-Na Hu. (2022) Microstructural Features and Mechanical Behaviors of Al0.5Cr0.8CoFeNi2.5V0.2 High-Entropy Alloys Fabricated by Selective Laser Melting Technique. Acta Metallurgica Sinica (English Letters) 35:10, pages 1591-1606.
Crossref
Crossref
Mingkun Jiang, Ying Han, Xiangyi Chen, Guoqing Zu, Weiwei Zhu & Xu Ran. (2022) Cu-rich nanoprecipitates modified using Al to simultaneously enhance the strength and ductility of ferritic stainless steel. Journal of Materials Science & Technology 121, pages 93-98.
Crossref
Crossref
Athul Sathyanath & Anil Meena. (2022) Dislocation-Precipitate Interaction-Based Kocks–Mecking Analysis of Heat-Treated 17-4 PH Stainless Steel. JOM 74:7, pages 2817-2825.
Crossref
Crossref
Vindala Poojitha, T. Raghu & V. Pandurangadu. 2022. Intelligent Manufacturing and Energy Sustainability. Intelligent Manufacturing and Energy Sustainability
177
183
.
Alan F. Jankowski. (2021)
A constitutive structural parameter c
b
for the work hardening behavior of additively manufactured Ti‐6Al‐4V
. Material Design & Processing Communications 3:5.
Crossref
Crossref
Saptarshi Dutta & P. S. Robi. (2021) Analysis of tensile flow and work hardening behavior of Zr-2.5Nb alloy in the framework of Kocks — Mecking approach. Journal of Mechanical Science and Technology 35:8, pages 3369-3374.
Crossref
Crossref
Alan F. Jankowski, Nancy Yang & Wei‐Yang Lu. (2020)
Constitutive structural parameter
c
b
for the work‐hardening behavior of laser powder‐bed fusion, additively manufactured 316L stainless steel
. Material Design & Processing Communications 2:6.
Crossref
Crossref
Aman SoniAlankar Alankar. (2019) Analyses of Constitutive Behavior of As-Cast Aluminum Alloys AA3104, AA5182, and AA6111 During Direct Chill Casting Using Physically Based Models. Journal of Engineering Materials and Technology 141:3.
Crossref
Crossref
J. L. Li, D. Wu, R. S. Chen & E. H. Han. (2019) Effect of Aging Treatment on Tensile Behaviors of Cast Mg-9Gd-4Y-0.5Zr Alloy. JOM 71:6, pages 2010-2017.
Crossref
Crossref
Dipankar Saha & Sukhomay Pal. (2019) Microstructure and Work Hardening Behavior of Micro-plasma Arc Welded AISI 316L Sheet Joint. Journal of Materials Engineering and Performance 28:5, pages 2588-2599.
Crossref
Crossref
Jaegu Choi, Chang-Sung Seok, Soo Park & Gayeon Kim. (2019) Effect of high-temperature degradation on microstructure evolution and mechanical properties of austenitic heat-resistant steel. Journal of Materials Research and Technology 8:2, pages 2011-2020.
Crossref
Crossref
Gabriel Torrente Prato. (2019) Hardening and Dynamic Recovery During Hot Compression Test of Copper Simulated as Viscoplastic Material. Materials Research 22:5.
Crossref
Crossref
M. Vinoth Kumar, V. Balasubramanian & A. Gourav Rao. (2017) Hot tensile properties and strain hardening behaviour of Super 304HCu stainless steel. Journal of Materials Research and Technology 6:2, pages 116-122.
Crossref
Crossref
R. Nivas, P.K. Singh, G. Das, S.K. Das, S. Kumar, B. Mahato, K. Sivaprasad & M. Ghosh. (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes 25, pages 274-283.
Crossref
Crossref
Ming-Liang Zhu & Fu-Zhen Xuan. (2015) Effect of microstructure on strain hardening and strength distributions along a Cr–Ni–Mo–V steel welded joint. Materials & Design (1980-2015) 65, pages 707-715.
Crossref
Crossref
B.K. Choudhary, M.D. Mathew, E. Isaac Samuel, J. Christopher & T. Jayakumar. (2013) Elevated temperature tensile properties of P9 steel towards ferritic steel wrapper development for sodium cooled fast reactors. Journal of Nuclear Materials 443:1-3, pages 242-249.
Crossref
Crossref
B.K. Choudhary. (2013) Influence of strain rate and temperature on serrated flow in 9Cr–1Mo ferritic steel. Materials Science and Engineering: A 564, pages 303-309.
Crossref
Crossref