Advanced search
Publication Cover
Materials Science and Technology Volume 28, 2012 - Issue 9-10: Hardness across the multi-scales of structure and loading rate
Journal homepage
421
Views
32
CrossRef citations to date
0
Altmetric
Special Issue Articles

Scale effects in convoluted thermal/spatial statistics of plasticity initiation in small stressed volumes during nanoindentation

T. L. LiDepartment of Materials Science and Engineering, University of Tennessee, Knoxville, TN37996, USA
,
H. BeiMaterials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN37831, USA
,
J. R. MorrisDepartment of Materials Science and Engineering, University of Tennessee, Knoxville, TN37996, USA;Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN37831, USA
,
E. P. GeorgeDepartment of Materials Science and Engineering, University of Tennessee, Knoxville, TN37996, USA;Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN37831, USA
&
Y. F. GaoDepartment of Materials Science and Engineering, University of Tennessee, Knoxville, TN37996, USA;Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN37831, USACorrespondence[email protected]
Pages 1055-1059 | Received 13 Oct 2011, Accepted 09 Jan 2012, Published online: 12 Nov 2013

Citations (32)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Nian Zhou, Khalil I. Elkhodary, Xiaoxu Huang, Shan Tang & Ying Li. (2020) Dislocation structure and dynamics govern pop-in modes of nanoindentation on single-crystal metals. Philosophical Magazine 100:12, pages 1585-1606.
Read now
Avraam A. Konstantinidis & Katerina E. Aifantis. (2019) Capturing slip band formation in Ni3Al nanocubes during compression. Materials Science and Technology 35:5, pages 571-576.
Read now
Steve Bull. (2012) Hardness across the multi-scales of structure and loading rate: a post-meeting response to the ‘pre-editorial’. Materials Science and Technology 28:9-10, pages 1025-1027.
Read now

Articles from other publishers (29)

Morgan R. Jones, N. Scott Bobbitt, Frank W. DelRio, Mark A. Wilson, Hannah C. Howard, Melina A. Endsley, Jonathan W. Pegues, Ping Lu, Andrew B. Kustas, Irene J. Beyerlein, Michael Chandross & Nicolas Argibay. (2023) Evidence of twinning-induced plasticity (TWIP) and ultrahigh hardness in additively-manufactured near-eutectic Ni–Nb. Journal of Materials Science 58:23, pages 9723-9736.
Crossref
Lukas Porz. (2022) 60 years of dislocations in ceramics: A conceptual framework for dislocation mechanics in ceramics. International Journal of Ceramic Engineering & Science 4:4, pages 214-239.
Crossref
Shigenobu Ogata. 2022. The Plaston Concept. The Plaston Concept 37 56 .
H.Y. Dong, C.Y. Hu, G.H. Wu, K.M. Wu & R.D.K. Misra. (2021) Effect of nickel on hardening behavior and mechanical properties of nanostructured bainite-austenite steels. Materials Science and Engineering: A 817, pages 141410.
Crossref
Xiazi Xiao & Long Yu. (2021) A unified statistical model for indentation pop-in: Effects of indenter radius and microstructure density on the transition from homogeneous nucleation to heterogeneous nucleation to bulk plasticity. International Journal of Plasticity 141, pages 102980.
Crossref
Takahito Ohmura & Masato Wakeda. (2021) Pop-In Phenomenon as a Fundamental Plasticity Probed by Nanoindentation Technique. Materials 14:8, pages 1879.
Crossref
Robert F. Cook, Frank W. DelRio & Brad L. Boyce. (2019) Predicting strength distributions of MEMS structures using flaw size and spatial density. Microsystems & Nanoengineering 5:1.
Crossref
Yuji Sato, Shuhei Shinzato, Takahito Ohmura & Shigenobu Ogata. (2019) Atomistic prediction of the temperature- and loading-rate-dependent first pop-in load in nanoindentation. International Journal of Plasticity 121, pages 280-292.
Crossref
Ruth E. Roman & Steven W. Cranford. (2019) Defect sensitivity and Weibull strength analysis of monolayer silicene. Mechanics of Materials 133, pages 13-25.
Crossref
Tingkun Liu, Yanfei Gao & Hongbin Bei. (2017) Probing elastically or plastically induced structural heterogeneities in bulk metallic glasses by nanoindentation pop-in tests. AIP Advances 7:8.
Crossref
Wei Zhang, Yanfei Gao, Yuzhi Xia & Hongbin Bei. (2017) Indentation Schmid factor and incipient plasticity by nanoindentation pop-in tests in hexagonal close-packed single crystals. Acta Materialia 134, pages 53-65.
Crossref
Amit Datye, Lin Li, Wei Zhang, Yujie Wei, Yanfei Gao & George M. Pharr. (2016) Extraction of Anisotropic Mechanical Properties From Nanoindentation of SiC-6H Single Crystals. Journal of Applied Mechanics 83:9.
Crossref
Yanfei Gao & Hongbin Bei. (2016) Strength statistics of single crystals and metallic glasses under small stressed volumes. Progress in Materials Science 82, pages 118-150.
Crossref
Yuzhi Xia, Yanfei Gao, George M. Pharr & Hongbin Bei. (2016) Single versus successive pop-in modes in nanoindentation tests of single crystals. Journal of Materials Research 31:14, pages 2065-2075.
Crossref
Haifei Zhan, Gang Zhang, Vincent B. C. Tan, Yuan Cheng, John M. Bell, Yong-Wei Zhang & Yuantong Gu. (2016) From brittle to ductile: a structure dependent ductility of diamond nanothread. Nanoscale 8:21, pages 11177-11184.
Crossref
H. Bei, Y.Z. Xia, R.I. Barabash & Y.F. Gao. (2016) A tale of two mechanisms: Strain-softening versus strain-hardening in single crystals under small stressed volumes. Scripta Materialia 110, pages 48-52.
Crossref
D. Wu, J.S.C. Jang & T.G. Nieh. (2016) Elastic and plastic deformations in a high entropy alloy investigated using a nanoindentation method. Intermetallics 68, pages 118-127.
Crossref
Andrew J. Wagner, Eric D. Hintsala, Prashant Kumar, William W. Gerberich & K. Andre Mkhoyan. (2015) Mechanisms of plasticity in near-theoretical strength sub-100 nm Si nanocubes. Acta Materialia 100, pages 256-265.
Crossref
Weidong Li, Yanfei Gao & Hongbin Bei. (2015) On the correlation between microscopic structural heterogeneity and embrittlement behavior in metallic glasses. Scientific Reports 5:1.
Crossref
J. Kwon, M.L. Bowers, M.C. Brandes, V. McCreary, I.M. Robertson, P. Sudaharshan Phani, H. Bei, Y.F. Gao, G.M. Pharr, E.P. George & M.J. Mills. (2015) Characterization of dislocation structures and deformation mechanisms in as-grown and deformed directionally solidified NiAl–Mo composites. Acta Materialia 89, pages 315-326.
Crossref
D. Wu, J.R. Morris & T.G. Nieh. (2015) Effect of tip radius on the incipient plasticity of chromium studied by nanoindentation. Scripta Materialia 94, pages 52-55.
Crossref
Samantha K. Lawrence, Hussein M. Zbib, Megan J. Cordill, Stefan Wurster & David F. Bahr. (2014) Statistical Quantification of the Impact of Surface Preparation on Yield Point Phenomena in Nickel. Metallurgical and Materials Transactions A 45:10, pages 4307-4315.
Crossref
Y.Z. Xia, H. Bei, Y.F. Gao, D. Catoor & E.P. George. (2014) Synthesis, characterization, and nanoindentation response of single crystal Fe–Cr–Ni alloys with FCC and BCC structures. Materials Science and Engineering: A 611, pages 177-187.
Crossref
P. E. Loya, Y. Z. Xia, C. Peng, H. Bei, P. Zhang, J. Zhang, E. P. George, Y. F. Gao & J. Lou. (2014) Yield strength dependence on strain rate of molybdenum-alloy nanofibers. Applied Physics Letters 104:25.
Crossref
Shuai Shao, Niaz Abdolrahim, David F. Bahr, Guang Lin & Hussein M. Zbib. (2014) Stochastic effects in plasticity in small volumes. International Journal of Plasticity 52, pages 117-132.
Crossref
P. Sudharshan Phani, Kurt E. Johanns, Easo P. George & George M. Pharr. (2013) A stochastic model for the size dependence of spherical indentation pop-in. Journal of Materials Research 28:19, pages 2728-2739.
Crossref
Weidong Li, Hongbin Bei, Jun Qu & Yanfei Gao. (2013) Effects of machine stiffness on the loading–displacement curve during spherical nano-indentation. Journal of Materials Research 28:14, pages 1903-1911.
Crossref
Vinod Kumar, Ankur Gupta, Debrupa Lahiri & Kantesh Balani. (2013) Serrated yielding during nanoindentation of thermomechanically processed novel Mg–9Li–7Al–1Sn and Mg–9Li–5Al–3Sn–1Zn alloys. Journal of Physics D: Applied Physics 46:14, pages 145304.
Crossref
R. W. ARMSTRONG, W. L. ELBAN & S. M. WALLEY. (2013) ELASTIC, PLASTIC, CRACKING ASPECTS OF THE HARDNESS OF MATERIALS. International Journal of Modern Physics B 27:08, pages 1330004.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.