Citations (51)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Jakub Bańczerowski, Jerzy Jeleńkowski, Konstanty Skalski, Sylwester Sawicki & Marcin Wachowski. (2019) Structure and mechanism of the deformation of Grade 2 titanium in plastometric studies. Materials Science and Technology 35:3, pages 253-259.
Read now
Read now
Jian Peng, Kaishang Li, Jian Peng, Junfeng Pei & Changyu Zhou. (2018) The effect of pre-strain on tensile behaviour of 316L austenitic stainless steel. Materials Science and Technology 34:5, pages 547-560.
Read now
Read now
Lixiong Xu, Huibin Wu & Baosheng Xie. (2018) An improved constitutive model for high-temperature flow behaviour of the Fe–Mn–Al duplex steel. Materials Science and Technology 34:2, pages 229-241.
Read now
Read now
L. Lu, J. Zhao, L. Liu & Z. Wang. (2016) Microstructural evolution and deformation behaviour of wrought Mg–Al–Zn alloys under dynamic compression. Materials Science and Technology 32:10, pages 955-962.
Read now
Read now
X. W. Yang, J. C. Zhu & W. Y. Li. (2015) Constitutive behaviour in as quenched Al–5Cu–0·4Mn alloy during hot deformation. Materials Science and Technology 31:11, pages 1320-1328.
Read now
Read now
Articles from other publishers (46)
Jeong Hwi Park, Nurhidayah Abd Hamid, Jong Bok Byun, Su Min Ji, Jeong Muk Choi & Man Soo Joun. 2024. Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity
394
405
.
Su Min Ji, Mohd Kaswandee Razali, Jeong Muk Choi & Man Soo Joun. 2024. Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity
381
393
.
Mohanraj Murugesan, Jae-Hyeong Yu, Wanjin Chung & Chang-Whan Lee. (2023) Warm Deformation Behavior and Flow Stress Modeling of AZ31B Magnesium Alloy under Tensile Deformation. Materials 16:14, pages 5088.
Crossref
Crossref
Zhang Yan, Youjuan Ma, Huixia Liu & Xiao Wang. (2023) Investigation on formability and mechanism in laser shock hydraulic warm free-bulging of AZ31B magnesium alloy foils. The International Journal of Advanced Manufacturing Technology 126:1-2, pages 505-517.
Crossref
Crossref
Putta Venkata Sai Divya, Pavan Kumar Penumakala, Krishnavajhala Guru Venkat Kalyan & Ashok Kumar Nallathambi. (2022) Analysis of hot tensile behaviour and prediction of thermal stresses during processing of AZ31 magnesium alloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237:6, pages 1445-1462.
Crossref
Crossref
Soroush Najafi, Alireza Sheikhani, Yahya Palizdar & Hadi Torkamani. (2022) Processing Maps and Hot Compression Behaviors of ZK60 Alloy After Adding Different Rare Earth Elements. Journal of Materials Engineering and Performance 32:5, pages 2249-2263.
Crossref
Crossref
Jeong-Hwi Park, Su-Min Ji, Jeong-Muk Choi & Man-Soo Joun. (2022) Accurate Flow Characterization of A6082 for Precision Simulation of a Hot Metal Forming Process. Materials 15:23, pages 8656.
Crossref
Crossref
M.S. Joun, S.M. Ji, J.D. Yoo, S.H. Chung, H.K. Moon, E.J. Kim, D.J. Yoon, J.M. Choi & A. Babu. (2022) Characterization of AZ31B, AZ61A and AZ80A magnesium alloys with an emphasis on temperature compensation for their application to a hot forging. Journal of Manufacturing Processes 84, pages 764-785.
Crossref
Crossref
Jeyong Yu, In Yong Moon, Hi Won Jeong, Ho Won Lee, Ji Hoon Kim & Seong-Hoon Kang. (2022) Modeling the Stress–Strain Curves and Dynamic Recrystallization of Nickel-Based A230 Alloy During Hot Deformation. Metals and Materials International 28:12, pages 3016-3032.
Crossref
Crossref
In Yong Moon, Jeyong Yu, Hi Won Jeong, Ho Won Lee, Se-Jong Kim, Young-Seok Oh, Jaimyun Jung, Sehyeok Oh & Seong-Hoon Kang. (2022) Predicting microstructural evolution based on deformation history of A230 alloy using a finite element method-assisted generative model. Materials Science and Engineering: A 854, pages 143852.
Crossref
Crossref
Man Soo Joun, Mohd Kaswandee Razali, Jae Dong Yoo, Min Cheol Kim & Jeong Muk Choi. (2022) Novel extended C-m models of flow stress for accurate mechanical and metallurgical calculations and comparison with traditional flow models. Journal of Magnesium and Alloys 10:9, pages 2516-2533.
Crossref
Crossref
Kwang Min Kim, Jong Bok Byun, Jonghyun Jeong, Jung Gi Kim, Seok Moo Hong, Kwang Hee Lee, Wan Jin Chung & Man Soo Joun. (2022) Fracture mechanism of AISI 1025 rod shearing in automatic multi-stage cold forging and critical shearing speed. Engineering Fracture Mechanics 272, pages 108679.
Crossref
Crossref
Japheth Obiko, Lesley Chown, David Whitefield & Micheal Bodunrin. (2022) Metal flow behaviour and processing maps of high heat resistant steel during hot compression. The International Journal of Advanced Manufacturing Technology 121:5-6, pages 4153-4167.
Crossref
Crossref
Erfan Azqadan, Jared Uramowski, Ali A. Roostaei, Seyed Behzad Behravesh, Amjad Javaid, Bruce W. Williams, Mary A. Wells & Hamid Jahed. (2022) The effect of cooling rate and degassing on microstructure and mechanical properties of cast AZ80 magnesium alloy. Materials Science and Engineering: A 844, pages 143176.
Crossref
Crossref
Xingrui Chen, Xiaoqiang Li, Fangkun Ning, Qiyu Liao, Qichi Le, Xiong Zhou & Fuxiao Yu. (2022) The hot rolling deformation performance of as-cast AZ80 magnesium alloy after ultrasonic processing. Journal of Materials Research and Technology 17, pages 1707-1715.
Crossref
Crossref
Umer Masood Chaudry, Russlan Jaafreh, Abdul Malik, Tea-Sung Jun, Kotiba Hamad & Tamer Abuhmed. (2022) A Comparative Study of Strain Rate Constitutive and Machine Learning Models for Flow Behavior of AZ31-0.5 Ca Mg Alloy during Hot Deformation. Mathematics 10:5, pages 766.
Crossref
Crossref
J D Yoo, M C Kim, E J Kim, M K Razali & M S Joun. (2021) Flow stress characterization of magnesium alloys at elevated temperatures: A review. Journal of Physics: Conference Series 2047:1, pages 012002.
Crossref
Crossref
Yahui Han, Changsheng Li, Jinyi Ren, Chunlin Qiu, En LI & Shuaishuai Chen. (2020) Characterization of Hot Deformation Behavior and Processing Map of As-Cast H13 Hot Work Die Steel. Metals and Materials International 27:9, pages 3574-3589.
Crossref
Crossref
Zhiqiang Hu, Kaikun Wang & Yan Yang. (2021) A Comparative Study on the Activation Energy for Hot Deformation of 5CrNiMoV and S34MnV Steel. Current Materials Science 14:1, pages 70-79.
Crossref
Crossref
Japheth Obiko. (2021) Friction correction of flow stress-strain curve in the upsetting process. IOP SciNotes 2:1, pages 014401.
Crossref
Crossref
Ruizhi Peng, Binjun Wang, Chun Xu, Yu Li & Xiaoyu Fan. (2021) The formation of the cross shear bands and its influence on dynamic recrystallization and mechanical properties under Turned-Reverse Rolling. Materials Today Communications 26, pages 102078.
Crossref
Crossref
Japheth Obiko & Fredrick Madaraka Mwema. 2021. Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering. Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering
288
301
.
A. Sheikhani, R. Roumina & R. Mahmudi. (2021) Hot deformation behavior of an extruded AZ31 alloy doped with rare-earth elements. Journal of Alloys and Compounds 852, pages 156961.
Crossref
Crossref
Qiang Liang, Xin Liu, Ping Li, Ping Ding & Xianming Zhang. (2020) Development and Application of High-Temperature Constitutive Model of HNi55-7-4-2 Alloy. Metals 10:9, pages 1250.
Crossref
Crossref
J Obiko & F Mwema. (2020) Numerical simulation on the effect of sample geometry size on the metal flow behaviour during the forging process. IOP SciNotes 1:1, pages 014401.
Crossref
Crossref
D.H. Qin, M.J. Wang, C.Y. Sun, Z.X. Su, L.Y. Qian & Z.H. Sun. (2020) Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation. Materials Science and Engineering: A 788, pages 139537.
Crossref
Crossref
Vidal Sanabria, Felix Gensch & Soeren Mueller. (2020) Application of Friction Shear Test for Constitutive Modeling Evaluation of Magnesium Alloy AZ31B at high Temperature. Procedia Manufacturing 47, pages 237-244.
Crossref
Crossref
Jian Zeng, Fenghua Wang, Xiaoxiao Wei, Shuai Dong, Zhenyan Zhang & Jie Dong. (2019) A New Constitutive Model for Thermal Deformation of Magnesium Alloys. Metallurgical and Materials Transactions A 51:1, pages 497-512.
Crossref
Crossref
F.M. Mwema, J.O. Obiko, E.T Akinlabi, S.A. Akinlabi & O.S. Fatoba. (2019) Effect of punch force on the upsetting deformation process using three-dimensional finite element analysis. Journal of Physics: Conference Series 1378:3, pages 032094.
Crossref
Crossref
Hamed Mirzadeh. (2018) Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension. International Journal of Material Forming 12:4, pages 643-648.
Crossref
Crossref
Xingrui Chen, Qiyu Liao, Yanxia Niu, Weitao Jia, Qichi Le, Chunlong Cheng, Fuxiao Yu & Jianzhong Cui. (2019) A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson–Cook model. Journal of Materials Research and Technology 8:2, pages 1859-1869.
Crossref
Crossref
Tao Lin, Yun-teng Liu, Ji-xue Zhou, Yuan-sheng Yang & Zhu Yang. (2018) FE Analysis of Dynamical Recrystallization during the Seamless Tube Extrusion of Semicontinuous Casting Magnesium Alloy and Experimental Verification. High Temperature Materials and Processes 37:9-10, pages 961-971.
Crossref
Crossref
Li-juan Pang, Xin Shang & Xuefeng Zhang. (2018) Influence of Deformation Conditions on the Critical Damage Factor of AZ31 Magnesium Alloy. Advances in Materials Science and Engineering 2018, pages 1-8.
Crossref
Crossref
Y. Cai, C.Y. Sun, W.R. Wang, Y.L. Li, L. Wan & L.Y. Qian. (2018) An isothermal forming process with multi-stage variable speed for magnesium component assisted by sensitivity analysis. Materials Science and Engineering: A 729, pages 9-20.
Crossref
Crossref
Amir Hadadzadeh & Mary A. Wells. (2017) Analysis of the hot deformation of ZK60 magnesium alloy. Journal of Magnesium and Alloys 5:4, pages 369-387.
Crossref
Crossref
Jing Zhou, Yanhong Mu & Baoyu Wang. (2017) A damage-coupled unified viscoplastic constitutive model for prediction of forming limits of 22MnB5 at high temperatures. International Journal of Mechanical Sciences 133, pages 457-468.
Crossref
Crossref
Y. Cai, L. Wan, Z.H. Guo, C.Y. Sun, D.J. Yang, Q.D. Zhang & Y.L. Li. (2017) Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities. Materials Science and Engineering: A 687, pages 113-122.
Crossref
Crossref
Zexing Su, Li Wan, Chaoyang Sun, Yun Cai & Daijun Yang. (2016) Hot deformation behavior of AZ80 magnesium alloy towards optimization of its hot workability. Materials Characterization 122, pages 90-97.
Crossref
Crossref
S. Aliakbari Sani, G.R. Ebrahimi & A.R. Kiani Rashid. (2016) Hot deformation behavior and dynamic recrystallization kinetics of AZ61 and AZ61 + Sr magnesium alloys. Journal of Magnesium and Alloys 4:2, pages 104-114.
Crossref
Crossref
W.Q. Li & Q.X. Ma. (2016) Constitutive modeling for investigating the effects of friction on rheological behavior during hot deformation. Materials & Design 97, pages 64-72.
Crossref
Crossref
Nan Li, Chaoyang Sun, Ning Guo, Mohamed Mohamed, Jianguo Lin, Takeki Matsumoto & Chao Liu. (2016) Experimental investigation of boron steel at hot stamping conditions. Journal of Materials Processing Technology 228, pages 2-10.
Crossref
Crossref
Hamed Mirzadeh. (2014) Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation. Mechanics of Materials 77, pages 80-85.
Crossref
Crossref
Hamed Mirzadeh. (2014) A comparative study on the hot flow stress of Mg–Al–Zn magnesium alloys using a simple physically-based approach. Journal of Magnesium and Alloys 2:3, pages 225-229.
Crossref
Crossref
Nan Li, Chaoyang Sun, Ning Guo, Mohamed Momhamed, Jianguo Lin & M. Takeki. (2014) Damage Investigation of Boron Steel at Hot Stamping Conditions. Procedia Engineering 81, pages 1744-1749.
Crossref
Crossref
In Yong Moon, Jeyong Yu, Hi Won Jeong, Ho Won Lee, Se-Jong Kim, Young-Seok Oh, Jaimyun Jung, Sehyeok Oh & Seong-Hoon Kang. (2022) Predicting Microstructural Evolution Based on Deformation History of A230 Alloy Using a Finite Element Method-Assisted Generative Model. SSRN Electronic Journal.
Crossref
Crossref
Erfan Azqadan, Jared Uramowski, Ali A. Roostaei, Seyed Behzad Behravesh, Amjad Javaid, Bruce W. Williams, Mary A. Wells & Hamid Jahed. (2022) The Effect of Cooling Rate and Degassing on Microstructure and Mechanical Properties of Cast Az80 Magnesium Alloy. SSRN Electronic Journal.
Crossref
Crossref