Citations (13)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (2)
Daniel Toledo dos Santos, Mario Zadra, Luca Girardini, Pietro Albonetti, Stefano Bordin & Alberto Molinari. (2020) Influence of die wall lubrication on tensile properties of high temperature sintered and sinterhardened low alloy steel. Powder Metallurgy 63:4, pages 268-276.
Read now
Read now
Wenchao Chen, Jigui Cheng, Lu Cheng, Pengqi Chen & Jiabin Xu. (2019) Improving the homogeneity and properties of ferrous powder mixes by a novel powder mixing process. Powder Metallurgy 62:2, pages 74-83.
Read now
Read now
Articles from other publishers (11)
Hjalmar Staf, Matilda Björklund, Daniel Fredriksson & Per-Lennart Larsson. (2023) On the Influence from Pressing Agent (PEG) on the Elastic and Plastic Mechanical Behavior of Hard Metal Powder Compacts. Crystals 13:6, pages 926.
Crossref
Crossref
A. M. Stolin, L. S. Stelmakh & E. V. Stelmakh. (2023) Cold-Pressing Processing of a Fluoropolymer-Based Composite Material. Theoretical Foundations of Chemical Engineering 57:1, pages 112-118.
Crossref
Crossref
D. Bohr, T. Petersen, K. Brunotte & B.-A. Behrens. 2022. Production at the Leading Edge of Technology. Production at the Leading Edge of Technology
349
356
.
S. V. Karpov, L. S. Stel’makhA. M. Stolin. (2020) Mathematical modeling of single action pressing of powder materials under dry friction conditions. Izvestiya vuzov. Poroshkovaya metallurgiya i funktsional’nye pokrytiya:4, pages 22-32.
Crossref
Crossref
A. M. Stolin, L. S. Stel’makh & S. V. Karpov. (2020) High-Temperature Indirect Compaction of Powder Materials with Active Action of an External Friction Force. Journal of Engineering Physics and Thermophysics 93:2, pages 317-323.
Crossref
Crossref
M. Zadra, L. Girardini, G. Pederzini, G. Patuelli, M. Piva, S. Bordin, L. De Mitri, A. Popolizio, I. Cristofolini & A. Molinari. (2019) Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels. Powder Metallurgy Progress 19:1, pages 44-52.
Crossref
Crossref
Hjalmar Staf, Erik Olsson, Per Lindskog & Per-Lennart Larsson. (2018) Determination of the Frictional Behavior at Compaction of Powder Materials Consisting of Spray-Dried Granules. Journal of Materials Engineering and Performance 27:3, pages 1308-1317.
Crossref
Crossref
C. Machio, R. Machaka & H.K. Chikwanda. (2016) Consolidation of titanium hydride powders during the production of titanium PM parts: The effect of die wall lubricants. Materials & Design 90, pages 757-766.
Crossref
Crossref
Ravi K. Enneti, Adam Lusin, Sumeet Kumar, Randall M. German & Sundar V. Atre. (2013) Effects of lubricant on green strength, compressibility and ejection of parts in die compaction process. Powder Technology 233, pages 22-29.
Crossref
Crossref
Mikael Olsson. (2011) A new test method for measuring the galling resistance between metal powders and die tool materials in powder compaction. Wear 273:1, pages 49-54.
Crossref
Crossref
Bruno C. Hancock, Nestor Mojica, Kimberley St.John-Green, James A. Elliott & Rahul Bharadwaj. (2010) An investigation into the kinetic (sliding) friction of some tablets and capsules. International Journal of Pharmaceutics 384:1-2, pages 39-45.
Crossref
Crossref