Mario Bragaglia, Matteo Mariani, Claudia Sergi, Fabrizio Sarasini, Jacopo Tirillò & Francesca Nanni. (2023) Polylactic acid as biobased binder for the production of 3D printing filaments for Ti6Al4V alloy manufacturing via bound metal deposition. Journal of Materials Research and Technology 27, pages 168-181.
Crossref

L. Bolzoni, M. Paul, F. Yang & Y. Alshammari. (2023) Titanium alloys developed on the basis of the addition of cheap strong eutectoid β-stabilisers. Journal of Materials Science 58:11, pages 5037-5047.
Crossref

Khurram Yaqoob, Izza Amjad, Muhammad Awais Munir Awan, Usman Liaqat, Muhammad Zahoor & Muhammad Kashif. (2023) Novel Method for the Production of Titanium Foams to Reduce Stress Shielding in Implants. ACS Omega 8:2, pages 1876-1884.
Crossref

Paramjot Singh, Vamsi K. Balla, Azim Gokce, Sundar V. Atre & Kunal H. Kate. (2021) Additive manufacturing of Ti-6Al-4V alloy by metal fused filament fabrication (MF3): producing parts comparable to that of metal injection molding. Progress in Additive Manufacturing 6:4, pages 593-606.
Crossref

Paramjot Singh, Vamsi K. Balla, Sundar V. Atre, Randall M. German & Kunal H. Kate. (2021) Factors affecting properties of Ti-6Al-4V alloy additive manufactured by metal fused filament fabrication. Powder Technology 386, pages 9-19.
Crossref

Yanjun Liu, Yu Pan, Xin Lu, Jianzhuo Sun, Tailong Hui, Yucheng Yang, Aihua Yu, Xuanhui Qu & Jiazhen Zhang. (2021) Fabrication of TiAl alloys turbocharger turbine wheel for engines by metal injection molding. Powder Technology 384, pages 132-140.
Crossref

Mohd Yusuf Zakaria, Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad & Muhammad Hussain Ismail. (2021) Application of sodium chloride as space holder for powder injection molding of alloy Titanium–Hydroxyapatite composites. Journal of Materials Research and Technology 12, pages 478-486.
Crossref

M. Jia, Y. Alshammari, F. Yang & L. Bolzoni. (2020) Effect of heat treatment on the microstructure and mechanical properties of blended elemental Ti–6Al–4V produced by powder forging. Materials Science and Engineering: A, pages 139724.
Crossref

Randall M. German. (2020) Titanium sintering science: A review of atomic events during densification. International Journal of Refractory Metals and Hard Materials 89, pages 105214.
Crossref

Ali Dehghan-Manshadi, Peng Yu, Matthew Dargusch, David StJohn & Ma Qian. (2020) Metal injection moulding of surgical tools, biomaterials and medical devices: A review. Powder Technology 364, pages 189-204.
Crossref

Paramjot Singh, Qasim Shaikh, Vamsi K. Balla, Sundar V. Atre & Kunal H. Kate. (2019) Estimating Powder-Polymer Material Properties Used in Design for Metal Fused Filament Fabrication (DfMF3). JOM 72:1, pages 485-495.
Crossref

Mehmet Subaşi, Asghar Safarian & Çetin Karataş. (2019) The investigation of production parameters of Ti-6Al-4V component by powder injection molding. The International Journal of Advanced Manufacturing Technology 105:11, pages 4747-4760.
Crossref

Isıl Yemisci, Ozal Mutlu, Nagihan Gulsoy, Kate Kunal, Sundar Atre & H. Ozkan Gulsoy. (2019) Experimentation and analysis of powder injection molded Ti10Nb10Zr alloy: a promising candidate for electrochemical and biomedical application. Journal of Materials Research and Technology 8:6, pages 5233-5245.
Crossref

Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar & Mohd Yusuf Zakaria. (2019) Effect of sintering on the microstructure and mechanical properties of alloy titanium-wollastonite composite fabricated by powder injection moulding process. Ceramics International 45:9, pages 11648-11653.
Crossref

Shulong Ye, Wei Mo, Yonghu Lv, Zhanhua Wang, Chi Tat Kwok & Peng Yu. (2019) The Technological Design of Geometrically Complex Ti-6Al-4V Parts by Metal Injection Molding. Applied Sciences 9:7, pages 1339.
Crossref

Ali Dehghan-Manshadi, Yunhui Chen, Zhiming Shi, Michael Bermingham, David StJohn, Matthew Dargusch & Ma Qian. (2018) Porous Titanium Scaffolds Fabricated by Metal Injection Moulding for Biomedical Applications. Materials 11:9, pages 1573.
Crossref

Erica Stevens, Samantha Schloder, Eric Bono, David Schmidt & Markus Chmielus. (2018) Density variation in binder jetting 3D-printed and sintered Ti-6Al-4V. Additive Manufacturing 22, pages 746-752.
Crossref

S. Ergen, F. Yılmaz, S. Gul, U. Kolemen, M.F. Kilicaslan & O. Uzun. (2018) Structural and mechanical properties of hypereutectic AlSiFe powders and a new method for determination of sintering temperature. Advanced Powder Technology 29:3, pages 563-572.
Crossref

A. Dehghan-Manshadi, D. StJohn, M. Dargusch, Y. Chen, J.F. Sun & M. Qian. (2018) Metal injection moulding of non-spherical titanium powders: Processing, microstructure and mechanical properties. Journal of Manufacturing Processes 31, pages 416-423.
Crossref

A. Dehghan-Manshadi, MJ. Bermingham, M.S. Dargusch, D.H. StJohn & M. Qian. (2017) Metal injection moulding of titanium and titanium alloys: Challenges and recent development. Powder Technology 319, pages 289-301.
Crossref

Eren Y?lmaz, Azim G?k?e, Fehim Findik & H. ?zkan G?lsoy. (2017) Characterization of biomedical Ti-16Nb-(0?4)Sn alloys produced by Powder Injection Molding. Vacuum 142, pages 164-174.
Crossref

Xiaokang Yan, Liang Hao, Wei Xiong & Danna Tang. (2017) Research on influencing factors and its optimization of metal powder injection molding without mold via an innovative 3D printing method . RSC Advances 7:87, pages 55232-55239.
Crossref

Randall M. German. 2015. Titanium Powder Metallurgy. Titanium Powder Metallurgy 361 382 .

Jia-hui WANG, Qing-nan SHI, Cheng-ling WU & Jian XI. (2013) Rheological characteristics of injection molded titanium alloys powder. Transactions of Nonferrous Metals Society of China 23:9, pages 2605-2610.
Crossref

Randall German. (2013) Progress in Titanium Metal Powder Injection Molding. Materials 6:8, pages 3641-3662.
Crossref

Gülsah Engin, Bülent Aydemir & H. Özkan Gülsoy. (2011) Injection molding of micro-porous titanium alloy with space holder technique. Rare Metals 30:6, pages 565-571.
Crossref

M. Qian, G.B. Schaffer & C.J. Bettles. 2010. Sintering of Advanced Materials. Sintering of Advanced Materials 324 355 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Share icon
Back to Top

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Effect of sintering parameters on mechanical properties of injection moulded Ti–6Al–4V alloys

Articles from other publishers (27)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature