Citations (18)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Alberto Cabo Rios, Eduard Hryha, Eugene Olevsky & Peter Harlin. (2022) Sintering anisotropy of binder jetted 316L stainless steel: part I – sintering anisotropy. Powder Metallurgy 65:4, pages 273-282.
Read now
Read now
Johan Wendel, Swathi K. Manchili, Eduard Hryha & Lars Nyborg. (2020) Sintering behaviour of compacted water-atomised iron powder: effect of initial state and processing conditions. Powder Metallurgy 63:5, pages 338-348.
Read now
Read now
S. Baselli & A. Molinari. (2019) Sintering shrinkage of uniaxial cold compacted iron: a new shrinkage kinetic equation accounting for the microstructure of green parts. Powder Metallurgy 62:1, pages 1-7.
Read now
Read now
S. Baselli, E. Torresani, M. Zago, S. Amirabdollahian, I. Cristofolini & A. Molinari. (2018) Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron. Powder Metallurgy 61:4, pages 276-284.
Read now
Read now
Alberto Molinari, Sasan Amirabdollahian, Marco Zago, Mats Larsson & Ilaria Cristofolini. (2018) Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts. Powder Metallurgy 61:4, pages 267-275.
Read now
Read now
Mehrdad Mousapour, Maziyar Azadbeh & Herbert Danninger. (2017) Effect of compacting pressure on shape retention during supersolidus liquid phase sintering of Cu base alloys. Powder Metallurgy 60:5, pages 393-403.
Read now
Read now
A. Molinari & E. Torresani. (2015) Preliminary study to determine the sintering stress from microstructural analysis of green parts. Powder Metallurgy 58:5, pages 323-327.
Read now
Read now
A. Molinari, E. Bisoffi, C. Menapace & J. Torralba. (2014) Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder. Powder Metallurgy 57:1, pages 61-69.
Read now
Read now
Articles from other publishers (10)
M. S. Egorov & E. V. Fominov. (2022) Thermal Spraying of Coatings on Aluminum Alloys of Combine Parts. Safety of Technogenic and Natural System:3, pages 75-80.
Crossref
Crossref
V Y Dorofeyev, A N Sviridova, Y M Berezhnoy, E N Bessarabov, S V Sviridova, K S Kochkarova & I D Derlugyan. (2021) Effect of microalloying on the stability of the endurance characteristics of hot-deformed powder steels. IOP Conference Series: Materials Science and Engineering 1155:1, pages 012019.
Crossref
Crossref
I. Cristofolini, A. Molinari, M. Zago, S. Amirabdollahian, O. Coube, M. J. Dougan, M. Larsson, M. Schneider, P. Valler, J. Voglhuber & L. Wimbert. (2019) Design for Powder Metallurgy: Predicting Anisotropic Dimensional Change on Sintering of Real Parts. International Journal of Precision Engineering and Manufacturing 20:4, pages 619-630.
Crossref
Crossref
E. Torresani, D. Giuntini, C. Zhu, T. Harrington, K. S. Vecchio, A. Molinari, R. K. Bordia & E. A. Olevsky. (2018) Anisotropy of Mass Transfer During Sintering of Powder Materials with Pore–Particle Structure Orientation. Metallurgical and Materials Transactions A 50:2, pages 1033-1049.
Crossref
Crossref
Herbert Danninger, Raquel de Oro Calderon & Christian Gierl‐Mayer. 2003. Ullmann's Encyclopedia of Industrial Chemistry. Ullmann's Encyclopedia of Industrial Chemistry
1
57
.
I. Cristofolini, N. Corsentino, M. Larsson & A. Molinari. (2016) Analytical Model of the Anisotropic Dimensional Change on Sintering of Ferrous PM Parts. Powder Metallurgy Progress 16:1, pages 27-39.
Crossref
Crossref
Alberto Molinari, Elisa Torresani, Cinzia Menapace & Mats Larsson. (2015) The Anisotropy of Dimensional Change on Sintering of Iron. Journal of the American Ceramic Society 98:11, pages 3431-3437.
Crossref
Crossref
Ilaria Cristofolini, Nicolò Corsentino, Alberto Molinari & Mats Larsson. (2014) Study of the influence of material and geometry on the anisotropy of dimensional change on sintering of Powder Metallurgy parts. International Journal of Precision Engineering and Manufacturing 15:9, pages 1865-1873.
Crossref
Crossref
. (2014) Powder Forming. Journal of the Japan Society for Technology of Plasticity 55:643, pages 716-719.
Crossref
Crossref
Ilaria Cristofolini, Melania Pilla, Andrea Rao, Stefano Libardi & Alberto Molinari. (2013) Dimensional and geometrical precision of powder metallurgy parts sintered and sinterhardened at high temperature. International Journal of Precision Engineering and Manufacturing 14:10, pages 1735-1742.
Crossref
Crossref