Citations (40)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Massimo Delogu, Lorenzo Berzi, Caterina Antonia Dattilo & Francesco Del Pero. (2023) Definition and sustainability assessment of recycling processes for bonded rare earths permanent magnets used on wind generators. Advances in Materials and Processing Technologies 9:2, pages 608-654.
Read now
Read now
Philipp Scholzen, Ali Rajaei, Jens Brimmers, Bengt Hallstedt, Thomas Bergs & Christoph Broeckmann. (2023) Influence of heat treatment and densification on the load capacity of sintered gears. Powder Metallurgy 66:2, pages 86-93.
Read now
Read now
Eberhard Ernst. (2013) Energy balance of a belt sinter furnace. Powder Metallurgy 56:2, pages 96-101.
Read now
Read now
Articles from other publishers (37)
Barbara Jadwiga Chrapek, Marcin Mroczkowski, Paweł Pałka, Anna Wąsik, Stanisław Małecki, Konrad Wojtaszek, Michael Goodsite, Marc Escribà-Gelonch, Volker Hessel & Marek Wojnicki. (2023) Sustainable synthesis and manufacturing of silver powder-based metal clay for zero-waste technology applications. Sustainable Materials and Technologies 38, pages e00746.
Crossref
Crossref
Antoine Merlo, Florin Duminica, Alain Daniel & Grégoire Léonard. (2023) Techno-Economic Analysis and Life Cycle Assessment of High-Velocity Oxy-Fuel Technology Compared to Chromium Electrodeposition. Materials 16:10, pages 3678.
Crossref
Crossref
Patricia Nyamekye, Saeed Rahimpour Golroudbary, Heidi Piili, Pasi Luukka & Andrzej Kraslawski. (2023) Impact of additive manufacturing on titanium supply chain: Case of titanium alloys in automotive and aerospace industries. Advances in Industrial and Manufacturing Engineering 6, pages 100112.
Crossref
Crossref
Elisa Zanchi, Antonio Gianfranco Sabato, Mari Carmen Monterde, Lucile Bernadet, Marc Torrell, José Antonio Calero, Albert Tarancón & Federico Smeacetto. (2023) Electrophoretic deposition of MnCo2O4 coating on solid oxide cell interconnects manufactured through powder metallurgy. Materials & Design 227, pages 111768.
Crossref
Crossref
Ming-Hsiang Ku, Guo-Jiun Shu, Yu-Jin Tsai, Yi-Kai Huang, Si-Xian Chi, Yu-Ching Wen & Ming-Wei Wu. (2023) The effects of microstructures on the mechanical performances and fracture mechanisms of boron-alloyed ferritic and martensitic stainless steels fabricated by powder metallurgy. Materials Science and Engineering: A 866, pages 144680.
Crossref
Crossref
Malina Nikolic, Nora Schelte, Michele Velenderic, Frederick Adjei & Semih Severengiz. 2023. Proceedings of the International Renewable Energy Storage Conference (IRES 2022). Proceedings of the International Renewable Energy Storage Conference (IRES 2022)
336
362
.
Sanjay KumarSanjay Kumar. 2023. Additive Manufacturing Advantage. Additive Manufacturing Advantage
1
60
.
Ali Rajaei, Marco Becker, Yuanbin Deng, Oliver Schenk, Soheil Rooein, Patricia de Oliveira Löhrer, Niklas Reinisch, Tarik Viehmann, Mustapha Abouridouane, Mauricio Fernández, Christoph Broeckmann, Thomas Bergs, Gerhard Hirt, Gerhard Lakemeyer & Georg Schmitz. 2023. Internet of Production. Internet of Production
1
21
.
Tugce Tekin & Rasim İpek. (2022) Rapid Sinterability of Mechanically Alloyed MgAl/MgO Composite with the Field-Assisted Sintering Technique. Russian Journal of Non-Ferrous Metals 63:6, pages 720-730.
Crossref
Crossref
Berend Denkena, Marcel Wichmann, Sven Friebe & Klaas Heide. (2022) Fräs- und Formwerkzeuge nachhaltig wiederaufbereiten. maschinenbau 2:6, pages 30-33.
Crossref
Crossref
Xiao Li, Tianhao Wang, Xiaolong Ma, Nicole Overman, Scott Whalen, Darrell Herling & Keerti Kappagantula. (2022) Manufacture aluminum alloy tube from powder with a single-step extrusion via ShAPE. Journal of Manufacturing Processes 80, pages 108-115.
Crossref
Crossref
O. P. Chernikova & Yu. A. Zlatitskaya. (2022) Resource efficiency of metallurgical production. Izvestiya. Ferrous Metallurgy 65:6, pages 390-398.
Crossref
Crossref
O. P. Chernikova & Yu. A. Zlatitskaya. (2022) Resource Efficiency of Metallurgical Production. Steel in Translation 52:6, pages 561-567.
Crossref
Crossref
Roland Šuba. (2022) Sustainability Aspects of Parts Additive Manufacturing from Metal Powder. Research Papers Faculty of Materials Science and Technology Slovak University of Technology 30:50, pages 37-44.
Crossref
Crossref
Xiao Li, Biao Guo, Jie Jian, Jinqing Ao, Qifeng Tang, Jiupeng Song & Yu Zhang. (2022) A new surface vibration extrusion process for surface densification and improvement of properties in powder metallurgical steel. Materials & Design 216, pages 110514.
Crossref
Crossref
Mario Rupp, Manuel Buck, René Klink, Markus Merkel & David K. Harrison. (2022) Additive manufacturing of steel for digital spare parts – A perspective on carbon emissions for decentral production. Cleaner Environmental Systems 4, pages 100069.
Crossref
Crossref
Antoine Merlo & Grégoire Léonard. 2022. 14th International Symposium on Process Systems Engineering. 14th International Symposium on Process Systems Engineering
2071
2076
.
Yang Yang, Shenglin Kang, Jie Liang, Jiexin Zhang, Xuetong Zhao, Lijun Yang & Ruijin Liao. 2022. The proceedings of the 16th Annual Conference of China Electrotechnical Society. The proceedings of the 16th Annual Conference of China Electrotechnical Society
1059
1066
.
Sanjay KumarSanjay Kumar. 2022. Additive Manufacturing Solutions. Additive Manufacturing Solutions
93
109
.
Ali Rajaei, Yuanbin Deng, Oliver Schenk, Soheil Rooein, Alexander Bezold & Christoph Broeckmann. (2021) Numerical Modelling of the Powder Metallurgical Manufacturing Chain of High Strength Sintered Gears. Chinese Journal of Mechanical Engineering 34:1.
Crossref
Crossref
Chongjie Gao, Sarah Wolff & Shiren Wang. (2021) Eco-friendly additive manufacturing of metals: Energy efficiency and life cycle analysis. Journal of Manufacturing Systems 60, pages 459-472.
Crossref
Crossref
Marian Niesler, Janusz Stecko, Sławomir Stelmach & Anna Kwiecińska-Mydlak. (2021) Biochars in Iron Ores Sintering Process: Effect on Sinter Quality and Emission. Energies 14:13, pages 3749.
Crossref
Crossref
Qiang Li, Biao Guo, Xiao Li, Yu Zhang, Jie Jian, Jinqing Ao, Qifeng Tang & Yun Lu. (2021) Fracture prediction of powder metallurgical Fe–Cu–C steel at elevated temperatures via finite element-aided hot tensile tests. Journal of Materials Research and Technology 12, pages 423-436.
Crossref
Crossref
Nan Luo, Yong Lin, Mohamad Chamas, Chunfeng Hu & Salvatore Grasso. (2021) Cold isostatic sintering to enhance the ionic conductivity of LiFePO4. Ceramics International 47:7, pages 9296-9302.
Crossref
Crossref
Jiankan Liao & Daniel R. Cooper. (2021) The Environmental Impacts of Metal Powder Bed Additive Manufacturing. Journal of Manufacturing Science and Engineering 143:3.
Crossref
Crossref
Babak Kianian & Carin Andersson. 2021. EcoDesign and Sustainability I. EcoDesign and Sustainability I
471
487
.
Biao Guo, Qiang Li, Hui Wu, Jinqing Ao, Qifeng Tang, Yu Zhang, Xiao Li & Yun Lu. (2020) Influences of impact energy on the densification and mechanical properties of powder metallurgical Fe–C–Cu preforms during a powder-forged process. Journal of Materials Research and Technology 9:6, pages 13914-13926.
Crossref
Crossref
J.G. Tirado González, B.T. Reyes Segura, J. Esguerra-Arce, A. Bermúdez Castañeda, Y. Aguilar & A. Esguerra-Arce. (2020) An innovative magnetic oxide dispersion-strengthened iron compound obtained from an industrial byproduct, with a view to circular economy. Journal of Cleaner Production 268, pages 122362.
Crossref
Crossref
Randall M. German & Animesh Bose. 2020. Binder and Polymer Assisted Powder Processing. Binder and Polymer Assisted Powder Processing
169
191
.
Amjed Saleh Mahmood, Riyadh A. Al-Samarai & Y. Al-Douri. 2020. Metal Oxide Powder Technologies. Metal Oxide Powder Technologies
253
262
.
Anna Furberg, Rickard Arvidsson & Sverker Molander. (2019) Environmental life cycle assessment of cemented carbide (WC-Co) production. Journal of Cleaner Production 209, pages 1126-1138.
Crossref
Crossref
Lorenzo Berzi, Caterina Antonia Dattilo, Francesco Del Pero, Massimo Delogu & Manuel Ignacio Gonzalez. (2019) Reduced use of rare earth elements for permanent magnet generators: preliminary results from NEOHIRE project. Procedia Structural Integrity 24, pages 961-977.
Crossref
Crossref
Tim Hettesheimer, Simon Hirzel & Han Byeol Roß. (2018) Energy savings through additive manufacturing: an analysis of selective laser sintering for automotive and aircraft components. Energy Efficiency 11:5, pages 1227-1245.
Crossref
Crossref
José M.C. Azevedo, André CabreraSerrenho & Julian M. Allwood. (2018) Energy and material efficiency of steel powder metallurgy. Powder Technology 328, pages 329-336.
Crossref
Crossref
Damoon Sohrabi Baba Heidary, Michael Lanagan & Clive A. Randall. (2018) Contrasting energy efficiency in various ceramic sintering processes. Journal of the European Ceramic Society 38:4, pages 1018-1029.
Crossref
Crossref
Runze Huang, Matthew E. Riddle, Diane Graziano, Sujit Das, Sachin Nimbalkar, Joe Cresko & Eric Masanet. (2017) Environmental and Economic Implications of Distributed Additive Manufacturing: The Case of Injection Mold Tooling. Journal of Industrial Ecology 21:S1.
Crossref
Crossref
Heng Zhang, Bicheng Zhu, Yunpeng Li, Omer Yaman & Utpal Roy. (2015) Development and utilization of a Process-oriented Information Model for sustainable manufacturing. Journal of Manufacturing Systems 37, pages 459-466.
Crossref
Crossref