Citations (36)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Anupama Prashar. (2023) Managing the powder coat waste stream: an industrial experimentation approach. Production Planning & Control 0:0, pages 1-16.
Read now
Read now
Rashed Mustafa Mazarbhuiya & Maneswar Rahang. (2022) Electric discharge coating on graphite using W–Cu sintered tool. Surface Engineering 38:3, pages 252-260.
Read now
Read now
Rashed Mustafa Mazarbhuiya & Maneswar Rahang. (2020) Reverse EDM process for pattern generation using powder metallurgical green compact tool. Materials and Manufacturing Processes 35:15, pages 1741-1748.
Read now
Read now
Ankita Sarmah, Siddhartha Kar & Promod Kumar Patowari. (2020) Surface modification of aluminum with green compact powder metallurgy Inconel-aluminum tool in EDM. Materials and Manufacturing Processes 35:10, pages 1104-1112.
Read now
Read now
Rashi Tyagi, Nitish Kumar Mahto, Alok Kumar Das & Amitava Mandal. (2020) Preparation of MoS2+Cu coating through the EDC process and its analysis. Surface Engineering 36:1, pages 86-93.
Read now
Read now
M. Rahang & P.K. Patowari. (2019) Pattern generation by selective area deposition of material in EDM. Materials and Manufacturing Processes 34:16, pages 1847-1854.
Read now
Read now
Siva kumar, M. Adam Khan & B. Muralidharan. (2019) Processing of titanium-based human implant material using wire EDM. Materials and Manufacturing Processes 34:6, pages 695-700.
Read now
Read now
Siddhartha Kar & Promod Kumar Patowari. (2018) Electrode wear phenomenon and its compensation in micro electrical discharge milling: A review. Materials and Manufacturing Processes 33:14, pages 1491-1517.
Read now
Read now
Eswara Krishna Mussada & P. K. Patowari. (2017) Post processing of the layer deposited by electric discharge coating. Materials and Manufacturing Processes 32:4, pages 442-449.
Read now
Read now
Maneswar Rahang & Promod Kumar Patowari. (2016) Parametric Optimization for Selective Surface Modification in EDM Using Taguchi Analysis. Materials and Manufacturing Processes 31:4, pages 422-431.
Read now
Read now
E. K. Mussada & P. K. Patowari. (2015) Characterisation of layer deposited by electric discharge coating process. Surface Engineering 31:10, pages 796-802.
Read now
Read now
M.-D. Jean. (2015) Optimisation of tribological performance of sputtering Zr/ZrC coatings. Surface Engineering 31:2, pages 103-113.
Read now
Read now
Articles from other publishers (24)
Elhuseini Garba, Ahmad Majdi Abdul-Rani, Nurul Azhani Yunus, Abdul Azeez Abdu Aliyu, Iqtidar Ahmed Gul, Md Al-Amin & Ruwaida Aliyu. (2023) A Review of Electrode Manufacturing Methods for Electrical Discharge Machining: Current Status and Future Perspectives for Surface Alloying. Machines 11:9, pages 906.
Crossref
Crossref
V Kumaran & B Muralidharan. (2023) Electric discharge coating process: a critical review with potential application. Engineering Research Express 5:1, pages 012005.
Crossref
Crossref
B Muralidharan, V Kumaran & R D Barathsuriya. (2023) Development and analysis of solid lubricant coating on M2 high-speed steel using the EDC process. Engineering Research Express 5:1, pages 015043.
Crossref
Crossref
Raphael M. Obodo, Hope E. Nsude, Ishaq Ahmad, M. Maaza & Fabian Ezema. 2023. Surface Modification and Functionalization of Ceramic Composites. Surface Modification and Functionalization of Ceramic Composites
205
227
.
Eswara Krishna Mussada. (2022) Modelling and prediction of WEDM parameters for sustainable machining of titanium grade-2 alloy. World Journal of Engineering.
Crossref
Crossref
Rashi Tyagi, Amitava Mandal, Alok Kumar Das, Ashutosh Tripathi, Chander Prakash, Raul Campilho & Kuldeep K. Saxena. (2022) Electrical Discharge Coating a Potential Surface Engineering Technique: A State of the Art. Processes 10:10, pages 1971.
Crossref
Crossref
JagadeeswaraRao Maddu, Buschaiah Karrolla, Riyaaz Uddien Shaik & Diana-Petronela Burdhuhos-Nergis. (2022) SWOT Analysis of Electrical Discharge Coatings: A Case Study of Copper Coating on Titanium Alloy. Surfaces 5:2, pages 290-307.
Crossref
Crossref
Rashi Tyagi, Alok Kumar Das, Amitava Mandal, Kuldeep Kumar Saxena & Ashutosh Tripathi. (2022) Hydrophobic properties and chemical state analysis of wear resistant coating prepared by electrical discharge process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892210992.
Crossref
Crossref
Rakesh Kumar Patel & Mohan Kumar Pradhan. (2022)
Effect of different currents and compositions of Cu, MoS
2
and HBN on the coating thickness of mild steel substrate using electric discharge coating
. Materials Research Express 9:5, pages 056507.
Crossref
Crossref
Binoy Kumar Baroi, Jagadish & Promod Kumar Patowari. (2022) A review on sustainability, health, and safety issues of electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:2.
Crossref
Crossref
Mohammed T. Hayajneh, Mohammed Almomani & Mohammad Al-Daraghmeh. (2021) Development and Evaluation of a Thin Cerium Oxide-Gelatin Nanolaminate Coating for Corrosion Protection of AISI 316L Stainless Steel. Manufacturing Technology 21:3, pages 330-339.
Crossref
Crossref
M- Ashok, T. Niranjan, S. Chokalingam & B. Singaravel. (2021) Investigation of powder mixed electrical discharge machining and process parameters optimization using Taguchi based overall evaluation criteria. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012075.
Crossref
Crossref
Sefa Celik, Nuray Bekoz Ullen, Sevim Akyuz & Aysen E. Ozel. 2021. Advanced Surface Coating Techniques for Modern Industrial Applications. Advanced Surface Coating Techniques for Modern Industrial Applications
226
246
.
Rashed Mustafa Mazarbhuiya & Maneswar Rahang. 2021. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering
815
822
.
Ching Yee Yap, Pay Jun Liew & Jiwang Yan. (2020) Surface modification of tungsten carbide cobalt by electrical discharge coating with quarry dust suspension. The International Journal of Advanced Manufacturing Technology 111:7-8, pages 2105-2116.
Crossref
Crossref
MANESWAR RAHANG & PROMOD KUMAR PATOWARI. (2020) SELECTIVE AREA DEPOSITION FOR PATTERN GENERATION IN EDM USING MASKING TECHNIQUE. Surface Review and Letters 27:10, pages 1950218.
Crossref
Crossref
Eswara Krishna Mussada & P.K. Patowari. (2020) Development of intelligent system for predicting MTR in EDC process using powder metallurgical tools. Grey Systems: Theory and Application 10:3, pages 321-337.
Crossref
Crossref
Pay Jun Liew, Ching Yee Yap, Jingsi Wang, Tianfeng Zhou & Jiwang Yan. (2020) Surface modification and functionalization by electrical discharge coating: a comprehensive review. International Journal of Extreme Manufacturing 2:1, pages 012004.
Crossref
Crossref
Abhishek Yadav, Shalini Mohanty, Akash Nag, Amit Rai Dixit & Alok Kumar Das. A concise review on improvement of tribological properties by electrical discharge coating process. A concise review on improvement of tribological properties by electrical discharge coating process.
Rashed Mustafa Mazarbhuiya & Maneswar Rahang. (2020) Surface modification of aluminium and its parametric optimization using grey relational analysis. Materials Today: Proceedings 26, pages 1594-1597.
Crossref
Crossref
ZHEN CHEN, YAOYAO SHI & XIAOJUN LIN. (2019) ENHANCED MATERIAL REMOVAL RATE AND SURFACE QUALITY IN Ti-6Al-4V BLISK BLADE POLISHING BY GRA-RBF-FA METHOD. Surface Review and Letters 26:09, pages 1950062.
Crossref
Crossref
U Elaiyarasan, V Satheeshkumar & C Senthilkumar. (2018) Experimental analysis of electrical discharge coating characteristics of magnesium alloy using response surface methodology. Materials Research Express 5:8, pages 086501.
Crossref
Crossref
M. Sivapragash, P. Kumaradhas, S.C. Vettivel & B. Stanly Jones Retnam. (2018) Optimization of PVD process parameter for coating AZ91D magnesium alloy by Taguchi grey approach. Journal of Magnesium and Alloys 6:2, pages 171-179.
Crossref
Crossref
SUJOY CHAKRABORTY, SIDDHARTHA KAR, VIDYUT DEY & SUBRATA KUMAR GHOSH. (2018) THE PHENOMENON OF SURFACE MODIFICATION BY ELECTRO-DISCHARGE COATING PROCESS: A REVIEW. Surface Review and Letters 25:01, pages 1830003.
Crossref
Crossref