Advanced search
Publication Cover
Surface Engineering Volume 30, 2014 - Issue 5: Cold Spray Technology: Part I
Journal homepage
499
Views
30
CrossRef citations to date
0
Altmetric
Original Articles

Annealing behaviour of 6061 aluminium deposited by high pressure cold spray

M. R. RokniDepartment of Materials & Metallurgical EngineeringAdvanced Materials Processing Center, South Dakota School of Mines & Technology (SDSM&T), Rapid City, SD, USACorrespondence[email protected]
,
C. A. WidenerDepartment of Materials & Metallurgical EngineeringAdvanced Materials Processing Center, South Dakota School of Mines & Technology (SDSM&T), Rapid City, SD, USA
,
S. P. AhrenkielDepartment of Nanoscience and Nanoengineering, South Dakota School of Mines & Technology (SDSM&T), Rapid City, SD, USA
,
B. K. JasthiDepartment of Materials & Metallurgical EngineeringAdvanced Materials Processing Center, South Dakota School of Mines & Technology (SDSM&T), Rapid City, SD, USA
&
V. R. ChampagneUS Army Research LaboratoryWeapons and Materials Research Directorate, Aberdeen Proving Ground, Aberdeen, MD, USA
Pages 361-368 | Received 24 Jun 2013, Accepted 18 Sep 2013, Published online: 19 Dec 2013

Citations (30)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Santosh Kumar. (2022) Influence of processing conditions on the mechanical, tribological and fatigue performance of cold spray coating: a review. Surface Engineering 38:4, pages 324-365.
Read now
K. Cao, M. Yu, C. M. Liang & H. Chen. (2020) Study on thermal conductivity of cold sprayed Cu coating. Surface Engineering 36:10, pages 1058-1066.
Read now
Antonio Viscusi, Antonello Astarita, Roberta Della Gatta & Felice Rubino. (2019) A perspective review on the bonding mechanisms in cold gas dynamic spray. Surface Engineering 35:9, pages 743-771.
Read now
Chengchuan Sun, Xianglin Zhou, Lingling Xu & Chen Xie. (2018) Effect of preheating on the deformation in cold spraying. Surface Engineering 34:10, pages 791-799.
Read now

Articles from other publishers (26)

M. Tarun Babu, S. Kumar, Gandham Phanikumar & Koppoju Suresh. (2023) Cold spraying of Al-aerospace alloys: Ease of coating deposition at high stagnation temperatures. Surface and Coatings Technology, pages 129703.
Crossref
Bharat K. Jasthi, Terrence S. Kuca, Marius D. Ellingsen, David L. Ellis, Venkata A.S. Kandadai & Todd R. Curtis. (2023) Microstructure and mechanical properties of cold spray additive manufactured Cu-Cr-Nb and Fe-Ni-Cr alloys. Additive Manufacturing 61, pages 103354.
Crossref
Anqi Yu, Kenneth Ross, Kyle Johnson, Bharat K. Jasthi & Bharat Gwalani. (2022) In situ observations of grain growth and recovery in cold sprayed Ni-Y2O3 and CP-Ni coatings using hot-stage TEM. Materials Characterization 192, pages 112199.
Crossref
M. Tarun Babu, S. Kumar, Manthripragada Ramakrishna, Gandham Phanikumar & Koppoju Suresh. (2022) Precipitation behavior of cold sprayed Al6061 coatings. Materialia, pages 101510.
Crossref
Brian L. James, Venkata Satish Bhattiprolu, Grant A. Crawford & Bharat K. Jasthi. (2022) Effect of zirconia secondary peening on the microstructure and mechanical behavior of Al6061 cold spray coatings. Surface and Coatings Technology 436, pages 128269.
Crossref
Novana Hutasoit, Muhammad Awais Javed, Rizwan Abdul Rahman Rashid, Scott Wade & Suresh Palanisamy. (2021) Effects of build orientation and heat treatment on microstructure, mechanical and corrosion properties of Al6061 aluminium parts built by cold spray additive manufacturing process. International Journal of Mechanical Sciences 204, pages 106526.
Crossref
Ahmed Fardan, Christopher C. Berndt & Rehan Ahmed. (2021) Numerical modelling of particle impact and residual stresses in cold sprayed coatings: A review. Surface and Coatings Technology 409, pages 126835.
Crossref
Zheng Zhang, Debbie Hwee Leng Seng, Ming Lin, Siew Lang Teo, Tzee Luai Meng, Coryl Jing Jun Lee, Zhi-Qian Zhang, Te Ba, Junyan Guo, Kannan Sundaravadivelu, Poh Koon Aw & Jisheng Pan. (2021) Cold spray deposition of Inconel 718 in comparison with atmospheric plasma spray deposition. Applied Surface Science 535, pages 147704.
Crossref
Hongxia Zhou, Chengxin Li, Xiaotao Luo, Guanjun Yang, Tanvir Hussain & Changjiu Li. (2020) Microstructure of Cross-Linked High Densification Network and Strengthening Mechanism in Cold-Sprayed Ti-6Al-4V Coating After Heat Treatment. Journal of Thermal Spray Technology 29:5, pages 1054-1069.
Crossref
Mohammad Vaezi, Philipp Drescher & Hermann Seitz. (2020) Beamless Metal Additive Manufacturing. Materials 13:4, pages 922.
Crossref
Pranjal Nautiyal, Cheng Zhang, Victor Champagne, Benjamin Boesl & Arvind Agarwal. (2019) In-situ creep deformation of cold-sprayed aluminum splats at elevated temperatures. Surface and Coatings Technology 372, pages 353-360.
Crossref
Benjamin A. Bedard, Tyler J. Flanagan, Alexis T. Ernst, Aaron Nardi, Avinash M. Dongare, Harold D. Brody, Victor K. ChampagneJr.Jr., Seok-Woo Lee & Mark Aindow. (2018) Microstructure and Micromechanical Response in Gas-Atomized Al 6061 Alloy Powder and Cold-Sprayed Splats. Journal of Thermal Spray Technology 27:8, pages 1563-1578.
Crossref
M. R. Rokni, A. T. Nardi, V. K. Champagne & S. R. Nutt. (2018) Effects of Preprocessing on Multi-Direction Properties of Aluminum Alloy Cold-Spray Deposits. Journal of Thermal Spray Technology 27:5, pages 818-826.
Crossref
Wenya Li, Kang Yang, Shuo Yin, Xiawei Yang, Yaxin Xu & Rocco Lupoi. (2018) Solid-state additive manufacturing and repairing by cold spraying: A review. Journal of Materials Science & Technology 34:3, pages 440-457.
Crossref
Venkata Satish Bhattiprolu, Kyle W. Johnson, Ozan C. Ozdemir & Grant A. Crawford. (2018) Influence of feedstock powder and cold spray processing parameters on microstructure and mechanical properties of Ti-6Al-4V cold spray depositions. Surface and Coatings Technology 335, pages 1-12.
Crossref
M. Reza Rokni, Steven R. Nutt, Christian A. Widener, Grant A. Crawford & Victor K. Champagne. 2018. Cold-Spray Coatings. Cold-Spray Coatings 143 192 .
M. R. Rokni, S. R. Nutt, C. A. Widener, V. K. Champagne & R. H. Hrabe. (2017) Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray. Journal of Thermal Spray Technology 26:6, pages 1308-1355.
Crossref
M.R. Rokni, C.A. Widener, O.C. Ozdemir & G.A. Crawford. (2017) Microstructure and mechanical properties of cold sprayed 6061 Al in As-sprayed and heat treated condition. Surface and Coatings Technology 309, pages 641-650.
Crossref
M.R. Rokni, C.A. Widener, V.K. Champagne, G.A. Crawford & S.R. Nutt. (2017) The effects of heat treatment on 7075 Al cold spray deposits. Surface and Coatings Technology 310, pages 278-285.
Crossref
D. Srinivasan. 2016. High Pressure Cold Spray. High Pressure Cold Spray 121 172 .
M.R. Rokni, C.A. Widener, V.K. Champagne & G.A. Crawford. (2015) Microstructure and mechanical properties of cold sprayed 7075 deposition during non-isothermal annealing. Surface and Coatings Technology 276, pages 305-315.
Crossref
M.R. Rokni, C.A. Widener, G.A. Crawford & M.K. West. (2015) An investigation into microstructure and mechanical properties of cold sprayed 7075 Al deposition. Materials Science and Engineering: A 625, pages 19-27.
Crossref
M.R. Rokni, C.A. Widener & G.A. Crawford. (2014) Microstructural evolution of 7075 Al gas atomized powder and high-pressure cold sprayed deposition. Surface and Coatings Technology 251, pages 254-263.
Crossref
M.R. Rokni, C.A. Widener, A.T. Nardi & V.K. Champagne. (2014) Nano crystalline high energy milled 5083 Al powder deposited using cold spray. Applied Surface Science 305, pages 797-804.
Crossref
Anqi Yu, Kenneth A. Ross, Kyle Johnson, Bharat K. Jasthi & Bharat Gwalani. (2022) In Situ Observations of Grain Growth and Recovery in Cold Sprayed Ni-Y2o3 and Cp-Ni Coatings Using Hot-Stage Transmission Electron Microscopy. SSRN Electronic Journal.
Crossref
Tarun Babu Mangalarapu, Kumar S, Ramakrishna Manthripragada, Phanikumar Gandham & Suresh Koppoju. (2022) Precipitation Behavior of Cold Sprayed Al6061 Coatings. SSRN Electronic Journal.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.