Citations (34)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Antonio Viscusi, Roberta Della Gatta, Francesco Delloro, Ilaria Papa, Alessia Serena Perna & Antonello Astarita. (2022) A novel manufacturing route for integrated 3D-printed composites and cold-sprayed metallic layer. Materials and Manufacturing Processes 37:5, pages 568-581.
Read now
Read now
Santosh Kumar. (2022) Influence of processing conditions on the mechanical, tribological and fatigue performance of cold spray coating: a review. Surface Engineering 38:4, pages 324-365.
Read now
Read now
Antonio Viscusi, Antonello Astarita, Roberta Della Gatta & Felice Rubino. (2019) A perspective review on the bonding mechanisms in cold gas dynamic spray. Surface Engineering 35:9, pages 743-771.
Read now
Read now
M. Winnicki, A. Baszczuk, M. Rutkowska-Gorczyca, A. Małachowska & A. Ambroziak. (2016) Corrosion resistance of tin coatings deposited by cold spraying. Surface Engineering 32:9, pages 691-700.
Read now
Read now
A. C. Karaoglanli, A. Turk & I. Ozdemir. (2016) Effect of sintering on mechanical properties of cold sprayed thermal barrier coatings. Surface Engineering 32:9, pages 686-690.
Read now
Read now
R. Giusti, S. Vezzù & G. Lucchetta. (2016) Wear-resistant cobalt-based coatings for injection moulds by cold spray. Surface Engineering 32:9, pages 677-685.
Read now
Read now
Harminder Singh, T. S Sidhu, S. B. S Kalsi & J. Karthikeyan. (2016) Evolution of the Microstructure by High Velocity Impacts of Particles by Cold Spray. Materials and Manufacturing Processes 31:11, pages 1514-1520.
Read now
Read now
Harminder Singh, T. S. Sidhu, J. Karthikeyan & S. B. S. Kalsi. (2016) Development and Characterization of Cr3C2–NiCr Coated Superalloy by Novel Cold Spray Process. Materials and Manufacturing Processes 31:11, pages 1476-1482.
Read now
Read now
Feng Wang & Ming Zhao. (2016) Simulation of Particle Deposition Behavior in Cold-Sprayed Mg Anticorrosion Coating. Materials and Manufacturing Processes 31:11, pages 1483-1489.
Read now
Read now
H. Singh, T. S. Sidhu & S. B. S. Kalsi. (2015) Behaviour of cold sprayed superalloy in incinerator at 900°C. Surface Engineering 31:11, pages 846-852.
Read now
Read now
H. Singh, T. S. Sidhu & S. S. Kalsi. (2015) Microstructure study of cold sprayed 50%Ni–50%Cr coating on Inconel-601. Surface Engineering 31:11, pages 825-831.
Read now
Read now
M. Yu, W. Y. Li, H. Chen, X. K. Suo & H. L. Liao. (2014) Effect of matrix/reinforcement combination on cold sprayed coating deposition behaviour. Surface Engineering 30:11, pages 796-800.
Read now
Read now
Articles from other publishers (22)
J. Martin, A. Maizeray, C. Da Silva Tousch, G. Marcos, T. Czerwiec & G. Henrion. (2023) A new strategy to prepare alumina-zirconia composite or multilayered coatings by combining cold-spray deposition and plasma electrolytic oxidation. Materials Today Communications 36, pages 106676.
Crossref
Crossref
Antonio Viscusi, Alessia Serena Perna & Antonello Astarita. (2023) A Preliminary Study on the Sustainability of Metallization of Polymer Matrix Composites through Cold Spray. Journal of Materials Engineering and Performance 32:9, pages 3888-3895.
Crossref
Crossref
Neeraj S. Karmarkar, Vikram V. Varadaraajan, Pravansu S. Mohanty & Sharan Kumar Nagendiran. (2023) An Attempt to Understand Stainless 316 Powders for Cold-Spray Deposition. Powders 2:1, pages 151-168.
Crossref
Crossref
Rodolpho Fernando Vaz, Andrea Garfias, Vicente Albaladejo, Javier Sanchez & Irene Garcia Cano. (2023) A Review of Advances in Cold Spray Additive Manufacturing. Coatings 13:2, pages 267.
Crossref
Crossref
Antonio Viscusi, Matteo Bruno, Luigi Carrino, Roberta Della Gatta, Giuseppe Iandolo & Alessia Serena Perna. (2022) Study of Bonding Mechanisms in Cold Spray of Metal-to-Polymer through a Numerical Approach. Key Engineering Materials 926, pages 56-64.
Crossref
Crossref
Ambra Paterlini, Joël Alexis, Yannick Balcaen & Ghislaine Bertrand. (2022) Cold Spraying of Thick Biomimetic and Stoichiometric Apatite Coatings for Orthopaedic Implants. Coatings 12:6, pages 722.
Crossref
Crossref
Pedro Poza & Miguel Ángel Garrido-Maneiro. (2022) Cold-sprayed coatings: Microstructure, mechanical properties, and wear behaviour. Progress in Materials Science 123, pages 100839.
Crossref
Crossref
Xin Chu, Fanchao Meng, Zonglin Chi, Huseyin Aydin, Ying-Kang Wei, Phuong Vo, Wen Sun, Renzhong Huang & Stephen Yue. (2021) Effects of powder characteristics and mixing powders on cold sprayability and corrosion properties of tantalum coatings. Surface and Coatings Technology 426, pages 127763.
Crossref
Crossref
Sara I. Imbriglio & Richard R. Chromik. (2021) Factors Affecting Adhesion in Metal/Ceramic Interfaces Created by Cold Spray. Journal of Thermal Spray Technology 30:7, pages 1703-1723.
Crossref
Crossref
Alessia Serena Perna, Antonello Astarita, Pierpaolo Carlone, Xavier Guthmann & Antonio Viscusi. (2021) Characterization of Cold-Spray Coatings on Fiber-Reinforced Polymers through Nanoindentation Tests. Metals 11:2, pages 331.
Crossref
Crossref
Rodolpho F. Vaz, Alessio Silvello, Javier Sanchez, Vicente Albaladejo & Irene García Cano. (2021) The Influence of the Powder Characteristics on 316L Stainless Steel Coatings Sprayed by Cold Gas Spray. Coatings 11:2, pages 168.
Crossref
Crossref
Timothy J. Eden, Ozan Cagatay Ozdemir & Victor Kenneth ChampagneJr.Jr.. 2021. Practical Cold Spray. Practical Cold Spray
27
51
.
Michel Jeandin, Francesco Delloro & Margaux Bunel. 2020. Cold Spray in the Realm of Additive Manufacturing. Cold Spray in the Realm of Additive Manufacturing
129
175
.
Aleksandra Nastic, Daniel MacDonald & Bertrand Jodoin. 2020. Cold Spray in the Realm of Additive Manufacturing. Cold Spray in the Realm of Additive Manufacturing
33
85
.
Long Wang, Feng Wang, Shuang Li & Yongqin Wang. (2019) Microstructure and application of alumina-supported Cu-based coating prepared by cold spray. Surface and Coatings Technology 362, pages 113-123.
Crossref
Crossref
M. Winnicki, A. Baszczuk, M. Jasiorski & A. Małachowska. (2017) Corrosion Resistance of Copper Coatings Deposited by Cold Spraying. Journal of Thermal Spray Technology 26:8, pages 1935-1946.
Crossref
Crossref
Armelle Vardelle, Christian Moreau, Jun Akedo, Hossein Ashrafizadeh, Christopher C. Berndt, Jörg Oberste Berghaus, Maher Boulos, Jeffrey Brogan, Athanasios C. Bourtsalas, Ali Dolatabadi, Mitchell Dorfman, Timothy J. Eden, Pierre Fauchais, Gary Fisher, Frank Gaertner, Malko Gindrat, Rudolf Henne, Margaret Hyland, Eric Irissou, Eric H. Jordan, Khiam Aik Khor, Andreas Killinger, Yuk-Chiu Lau, Chang-Jiu Li, Li Li, Jon Longtin, Nicolaie Markocsan, Patrick J. Masset, Jiri Matejicek, Georg Mauer, André McDonald, Javad Mostaghimi, Sanjay Sampath, Günter Schiller, Kentaro Shinoda, Mark F. Smith, Asif Ansar Syed, Nickolas J. Themelis, Filofteia-Laura Toma, Juan Pablo Trelles, Robert Vassen & Petri Vuoristo. (2016) The 2016 Thermal Spray Roadmap. Journal of Thermal Spray Technology 25:8, pages 1376-1440.
Crossref
Crossref
. 2016. Cold Gas Dynamic Spray. Cold Gas Dynamic Spray
153
244
.
Harminder Singh. (2015) Fabrication of High-Pressure Cold-Sprayed Coating on Ni-Based Superalloy for High-Temperature Corrosive Conditions. JOM 67:11, pages 2564-2572.
Crossref
Crossref
Phuong Vo, Dina Goldbaum, Wilson Wong, Eric Irissou, Jean-Gabriel Legoux, Richard R. Chromik & Stephen Yue. 2015. Titanium Powder Metallurgy. Titanium Powder Metallurgy
405
423
.
M. Jeandin, H. Koivuluoto & S. Vezzu. 2015. Modern Cold Spray. Modern Cold Spray
107
224
.
Grazia Cicala, Alessandro Massaro, Luciano Velardi, Giorgio S. Senesi & Antonio Valentini. (2014) Self-Assembled Pillar-like Structures in Nanodiamond Layers by Pulsed Spray Technique. ACS Applied Materials & Interfaces 6:23, pages 21101-21109.
Crossref
Crossref