Citations (33)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
Mahavir Singh, Pragya Tripathi & Janakarajan Ramkumar. (2022) Enhancing the hydrophobicity of Ti–6Al–4V through multi-level electrical discharge texturing. Surface Engineering 38:6, pages 651-663.
Read now
Read now
R. Jayachitra, R. Ranjith, B. Ramesh & R. Lawanya. (2022) Surface modification of Hastelloy processed by the Cu mixed electric discharge alloying technique. Surface Engineering 38:5, pages 482-498.
Read now
Read now
Rashed Mustafa Mazarbhuiya & Maneswar Rahang. (2022) Electric discharge coating on graphite using W–Cu sintered tool. Surface Engineering 38:3, pages 252-260.
Read now
Read now
Shalini Mohanty, Alok Kumar Das & Amit Rai Dixit. (2021) Influence of tool materials on surface modification using μEDC process. Surface Engineering 37:9, pages 1084-1097.
Read now
Read now
Rashed Mustafa Mazarbhuiya & Maneswar Rahang. (2020) Reverse EDM process for pattern generation using powder metallurgical green compact tool. Materials and Manufacturing Processes 35:15, pages 1741-1748.
Read now
Read now
Rashi Tyagi, Nitish Kumar Mahto, Alok Kumar Das & Amitava Mandal. (2020) Preparation of MoS2+Cu coating through the EDC process and its analysis. Surface Engineering 36:1, pages 86-93.
Read now
Read now
M. Rahang & P.K. Patowari. (2019) Pattern generation by selective area deposition of material in EDM. Materials and Manufacturing Processes 34:16, pages 1847-1854.
Read now
Read now
Rashi Tyagi, Kshitij Pandey, Alok Kumar Das & Amitava Mandal. (2019) Deposition of hBN+Cu layer through electrical discharge process using green compact electrode. Materials and Manufacturing Processes 34:9, pages 1035-1048.
Read now
Read now
Siddhartha Kar & Promod Kumar Patowari. (2018) Electrode wear phenomenon and its compensation in micro electrical discharge milling: A review. Materials and Manufacturing Processes 33:14, pages 1491-1517.
Read now
Read now
Luhai Zhou, Kaixiang Gao, Xiankun Zheng, Wurong Wang, Xicheng Wei & Meng Hua. (2018) Developing of galling during the forming and its improvement by physical vapour depositing. Surface Engineering 34:7, pages 493-503.
Read now
Read now
Eswara Krishna Mussada & P. K. Patowari. (2017) Post processing of the layer deposited by electric discharge coating. Materials and Manufacturing Processes 32:4, pages 442-449.
Read now
Read now
Articles from other publishers (22)
Sharad Yadav, Vishwajeet Kumar, Joy Prakash Misra, Rabesh Kumar Singh & Vikas Upadhyay. (2023) Surface modification by electrical discharge machining: A systematic literature review and bibliometric analysis. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Crossref
S V V N Siva Rao, T Bhavani, Gautam Kumar, S K Ghosh, J D Barma & R B Meitei. (2023) Parametric optimization and characterization of WC–Si–Cu composite layer deposited by electrical discharge coating. Sādhanā 48:4.
Crossref
Crossref
Amatya Bharadwaj & Rahul Dev Misra. (2023) Study of pool boiling on hydrophilic surfaces developed using electric discharge coating technique. Applied Thermal Engineering 234, pages 121267.
Crossref
Crossref
V Kumaran & B Muralidharan. (2023) Electric discharge coating process: a critical review with potential application. Engineering Research Express 5:1, pages 012005.
Crossref
Crossref
Amatya Bharadwaj & Rahul Dev Misra. (2023) Experimental pool boiling heat transfer analysis with Zn-Cu micro-structured surfaces developed by electric discharge coating technique. Applied Thermal Engineering 219, pages 119451.
Crossref
Crossref
Pay Jun Liew, Jiwang Yan & Ching Yee Yap. 2023. Advanced Ceramic Coatings. Advanced Ceramic Coatings
433
460
.
Raphael M. Obodo, Hope E. Nsude, Ishaq Ahmad, M. Maaza & Fabian Ezema. 2023. Surface Modification and Functionalization of Ceramic Composites. Surface Modification and Functionalization of Ceramic Composites
205
227
.
Amatya Bharadwaj & Rahul Dev Misra. (2022) Experimental analysis of pool boiling heat transfer on surfaces fabricated by electric discharge coating. International Communications in Heat and Mass Transfer 138, pages 106397.
Crossref
Crossref
Deepak Rajendra Unune, Georgina R. Brown & Gwendolen C. Reilly. (2022) Thermal based surface modification techniques for enhancing the corrosion and wear resistance of metallic implants: A review. Vacuum 203, pages 111298.
Crossref
Crossref
Rashi Tyagi, Alok Kumar Das, Amitava Mandal, Kuldeep Kumar Saxena & Ashutosh Tripathi. (2022) Hydrophobic properties and chemical state analysis of wear resistant coating prepared by electrical discharge process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892210992.
Crossref
Crossref
Rakesh Kumar Patel & Mohan Kumar Pradhan. (2022)
Effect of different currents and compositions of Cu, MoS
2
and HBN on the coating thickness of mild steel substrate using electric discharge coating
. Materials Research Express 9:5, pages 056507.
Crossref
Crossref
N. ANANTHI, U. ELAIYARASAN, V. SATHEESHKUMAR, C. SENTHILKUMAR & S. SATHIYAMURTHY. (2022) EFFECT OF WC–Cu COMPOSITE ELECTRODES ON MATERIAL DEPOSITION RATE, MICROHARDNESS AND MICROSTRUCTURE OF ELECTRICAL DISCHARGE COATED MAGNESIUM ALLOY. Surface Review and Letters 29:04.
Crossref
Crossref
Binoy Kumar Baroi, Jagadish & Promod Kumar Patowari. (2022) A review on sustainability, health, and safety issues of electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:2.
Crossref
Crossref
Maria Balanou, Panagiotis Karmiris-Obratański, Beata Leszczyńska-Madej, Emmanouil L. Papazoglou & Angelos P. Markopoulos. (2021) Investigation of Surface Modification of 60CrMoV18-5 Steel by EDM with Cu-ZrO2 Powder Metallurgy Green Compact Electrode. Machines 9:11, pages 268.
Crossref
Crossref
Andrea Carolina Pabón-Beltrán, Felipe Sanabria-Martínez, Custodio Vásquez-Quintero, José José Barba-Ortega & Ely Dannier Valbuena-Niño. (2021) Study of Concentration-depth Profiles of the Titanium and Nitrogen Ions by SRIM/TRIM Simulation. Ingenieria y Universidad 25.
Crossref
Crossref
S. V. V. N. SIVA RAO, THARRA BHAVANI, RAHUL KANTI NATH, PABITRA MAJI, SUBRATA KUMAR GHOSH & JOHN DEB BARMA. (2020) SURFACE MODIFICATION BY ELECTRO-DISCHARGE MACHINING USING POWDER METALLURGY ELECTRODE: A REVIEW. Surface Review and Letters 28:01, pages 2030004.
Crossref
Crossref
MANESWAR RAHANG & PROMOD KUMAR PATOWARI. (2020) SELECTIVE AREA DEPOSITION FOR PATTERN GENERATION IN EDM USING MASKING TECHNIQUE. Surface Review and Letters 27:10, pages 1950218.
Crossref
Crossref
Ilangovan Arun, C. Yuvaraj, P. Jyothibabu & G. Chandra Sekhar Reddy. (2020) Influence of Silica on Microstructural Modification of Electrical Discharge Composite Coating and its Wear Performance. Silicon 12:10, pages 2375-2386.
Crossref
Crossref
Eswara Krishna Mussada & P.K. Patowari. (2020) Development of intelligent system for predicting MTR in EDC process using powder metallurgical tools. Grey Systems: Theory and Application 10:3, pages 321-337.
Crossref
Crossref
Pay Jun Liew, Ching Yee Yap, Jingsi Wang, Tianfeng Zhou & Jiwang Yan. (2020) Surface modification and functionalization by electrical discharge coating: a comprehensive review. International Journal of Extreme Manufacturing 2:1, pages 012004.
Crossref
Crossref
Gurpreet Singh, Sarabjeet Singh Sidhu, Preetkanwal Singh Bains & Amandeep Singh Bhui. (2019)
Improving microhardness and wear resistance of 316L by TiO
2
powder mixed electro-discharge treatment
. Materials Research Express 6:8, pages 086501.
Crossref
Crossref
B. Sadeghi, M. Shamanian, F. Ashrafizadeh, P. Cavaliere & A. Rizzo. (2018) Wear Behavior of Al-Based Nanocomposites Reinforced with Bimodal Micro- and Nano-Sized Al2O3 Particles Produced by Spark Plasma Sintering. Materials Performance and Characterization 7:1, pages 20180039.
Crossref
Crossref