Guiqiu Liu, Shi Liu, Feng Xin, Yi Zhao, Delong Hu & Yan Zhang. (2022) Three-Dimensional Numerical Simulation of Creep Crack Growth Behavior for 316H Steel Using a Stress-Dependent Model. Mathematical Problems in Engineering 2022, pages 1-11.
Crossref
Y. Dai, G.R. Odette & T. Yamamoto. 2020. Comprehensive Nuclear Materials. Comprehensive Nuclear Materials
186
234
.
K. Nikbin & S. Liu. (2019) Multiscale-constraint based model to predict uniaxial/multiaxial creep damage and crack growth in 316-H steels. International Journal of Mechanical Sciences 156, pages 74-85.
Crossref
Stuart Holdsworth. (2019) Creep-Ductility of High Temperature Steels: A Review. Metals 9:3, pages 342.
Crossref
Jian-Feng Wen, Shan-Tung Tu, Fu-Zhen Xuan, Xue-Wei Zhang & Xin-Lin Gao. (2016) Effects of Stress Level and Stress State on Creep Ductility: Evaluation of Different Models. Journal of Materials Science & Technology 32:8, pages 695-704.
Crossref
Yanwei Dai, Donghuan Liu & Yinghua Liu. (2016) Mismatch Constraint Effect of Creep Crack With Modified Boundary Layer Model. Journal of Applied Mechanics 83:3.
Crossref
C. M. Omprakash, B. Srivathsa, M. Kamaraj & D. V. V. Satyanarayana. (2015) Creep Damage Evaluation of DS CM247 Nickel Base Superalloy Using Alternate Current Potential Drop Technique. Transactions of the Indian Institute of Metals 69:2, pages 241-245.
Crossref
R.P. Skelton. 2016. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Y. Dai, G.R. Odette & T. Yamamoto. 2012. Comprehensive Nuclear Materials. Comprehensive Nuclear Materials
141
193
.
Masashi Ozaki, Fumitoshi Sakata, Masaru Kodama & Nobuhiko Nishimura. (2010) Life Extension of Creep Damaged Low Alloy Steel Welds by Regenerative Heat Treatment. ISIJ International 50:8, pages 1217-1223.
Crossref
Meimei Li & S.J. Zinkle. (2007) Fracture mechanism maps in unirradiated and irradiated metals and alloys. Journal of Nuclear Materials 361:2-3, pages 192-205.
Crossref
Hermann Riedel. 2006. Materials Science and Technology. Materials Science and Technology.
M.W. Spindler. (2005) The prediction of creep damage in type 347 weld metal. Part I: the determination of material properties from creep and tensile tests. International Journal of Pressure Vessels and Piping 82:3, pages 175-184.
Crossref
B. Michel. (2004) Formulation of a new intergranular creep damage model for austenitic stainless steels. Nuclear Engineering and Design 227:2, pages 161-174.
Crossref
R.P. Skelton, I.W. Goodall, G.A. Webster & M.W. Spindler. (2003) Factors affecting reheat cracking in the HAZ of austenitic steel weldments. International Journal of Pressure Vessels and Piping 80:7-8, pages 441-451.
Crossref
R.P. Skelton. 2003. Comprehensive Structural Integrity. Comprehensive Structural Integrity
158
241
.
R.P. Skelton. 2003. Comprehensive Structural Integrity. Comprehensive Structural Integrity
25
112
.
Masayuki ARAI, Takashi OGATA & Akito NITTA. (1996) Continuous Observation of Cavity Growth and Coalescence by Creep-Fatigue Tests in SEM. JSME international journal. Ser. A, Mechanics and material engineering 39:3, pages 382-388.
Crossref
V. Sklenička. 1996. Mechanical Behaviour of Materials at High Temperature. Mechanical Behaviour of Materials at High Temperature
43
58
.
R. D. W. BESTWICK & D. E. BUCKTHORPE. (2007) STRAIN BASED CREEP‐FATIGUE DESIGN RULES. Fatigue & Fracture of Engineering Materials & Structures 17:7, pages 849-859.
Crossref
R Hales. (2007) THE ROLE OF CAVITY GROWTH MECHANISMS IN DETERMINING CREEP‐RUPTURE UNDER MULTIAXIAL STRESSES. Fatigue & Fracture of Engineering Materials & Structures 17:5, pages 579-591.
Crossref
Takeo Sumida, Takeshi Ikuno & Masayuki Sukekawa. (1994) Weibull distribution of the cavity length during creep in a Cr-Mo-V steel. Journal of Materials Science Letters 13:22, pages 1625-1628.
Crossref
Junro KYONO, Norio SHINYA, Hideaki KUSHIMA & Ryo HORIUCHI. (1993) Sintering Rate of Creep Cavities in Heat Resisting Steel. Tetsu-to-Hagane 79:5, pages 604-610.
Crossref
M. A. Korhonen, D. D. Brown, C.-Y. Li & J. E. Steinwall. (2011) Mechanical Properties of Plated Copper. MRS Proceedings 323.
Crossref
D.D. Brown, M.A. Korhonen, P. Børgesen & C.-Y. Li. (2011) Analysis of Thermal Stress Induced Void Growth During Thermal Cycling. MRS Proceedings 309.
Crossref
D.D. Brown, M.A. Korhonen, P. Børgesen & C.-Y. Li. (2011) Analysis of Thermal Stress Induced Void Growth During Thermal Cycling. MRS Proceedings 308.
Crossref
M. A. Korhonen, P. Børgesen & Che-Yu Li. 1993. Thermal Stress and Strain in Microelectronics Packaging. Thermal Stress and Strain in Microelectronics Packaging
360
384
.
P. Børgesen, M.A. Korhonen & C.-Y. Li. (1992) Stress and current induced voiding in passivated metal lines. Thin Solid Films 220:1-2, pages 8-13.
Crossref
S. Osgerby & T.B. Gibbons. (1992) The effect of trace elements on the creep behaviour of an NiCr-base alloy. Materials Science and Engineering: A 157:1, pages 63-71.
Crossref
M.A. Korhonen, P. Børgesen & Che-Yu Li. (2013) Mechanisms of Stress-Induced and Electromigration-Induced Damage in Passivated Narrow Metallizations on Rigid Substrates. MRS Bulletin 17:7, pages 61-69.
Crossref
D. A. Pelemo. (1992) Effects of notch geometry and impurity on creep fracture of low alloy steel. Materials Science and Technology 8:2, pages 163-170.
Crossref
M. A. Korhonen, C. A. Paszkiet & Che-Yu Li. (1991) Mechanisms of thermal stress relaxation and stress-induced voiding in narrow aluminum-based metallizations. Journal of Applied Physics 69:12, pages 8083-8091.
Crossref
Herbert Schroeder & Hans Ullmaier. (1991) Helium and hydrogen effects on the embrittlement of iron- and nickel-based alloys. Journal of Nuclear Materials 179-181, pages 118-124.
Crossref
M.A. Korhonen, P. Børgesen, C.A. Paszkiet, J.K. Lee & Che-Yu Li. (2011) Void Growth as a Function of Residual Stress Level in Thin, Narrow Aluminum Lines. MRS Proceedings 226.
Crossref
M.A. Korhonen, P. Bergesen & Che-Yu Li. (2011) Mechanisms of Inelastic Deformation and Stress Relaxation in Thin Metallizations Bonded to Hard Substrates. MRS Proceedings 226.
Crossref
M. A. Korhonen, P. Børgesen, C. A. Paszkiet, J. K. Lee & Che-Yu Li. (2011) Void Growth as a Function of Residual Stress Level in Thin, Narrow Aluminum Lines. MRS Proceedings 225.
Crossref
M. A. Korhonen, P. Brørgesen & Che-Yu Li. (2011) Mechanisms of Inelastic Deformation and Stress Relaxation in Thin Metallizations Bonded to Hard Substrates. MRS Proceedings 225.
Crossref
R.M. Boothby. (1990) Modelling grain boundary cavity growth in irradiated nimonic PE16. Journal of Nuclear Materials 171:2-3, pages 215-222.
Crossref
D. S. Wilkinson. 1990. Constitutive Laws of Plastic Deformation and Fracture. Constitutive Laws of Plastic Deformation and Fracture
321
331
.
M.A. Capano, A.S. Argon & I-W. Chen. (1989) Intergranular cavitation during creep in astroloy. Acta Metallurgica 37:12, pages 3195-3204.
Crossref
S.H. Hong & J. Yu. (1989) Effect of prior austenite grain size on creep properties and on creep crack growth in 3.5NiCrMoV steel. Scripta Metallurgica 23:7, pages 1057-1062.
Crossref
G. Sundararajan. (1989) The Monkman-Grant relationship. Materials Science and Engineering: A 112, pages 205-214.
Crossref
Hermann Riedel. (1989) Life prediction methods for constrained grain boundary cavitation. International Journal of Pressure Vessels and Piping 39:1-2, pages 119-134.
Crossref
Malcolm S. Loveday, W. N. Reynolds, D. R. Hayhurst, G. W. Greenwood, T. I. Barry, T. G. Chart, J. Lamon & F. Schubert. 1989. Research and Development of High Temperature Materials for Industry. Research and Development of High Temperature Materials for Industry
497
632
.
D.S Wilkinson. (1988) The effect of a non uniform void distribution on grain boundary void growth during creep. Acta Metallurgica 36:8, pages 2055-2063.
Crossref
I. P. Vasatis & R. M. Pelloux. (1988) Application of the dc potential drop technique in investigating crack initiation and propagation under sustained load in notched rupture tests. Metallurgical Transactions A 19:4, pages 863-871.
Crossref
J. M. Mintz & A. K. Mukherjee. (1988) Creep cavity growth from tritium-induced helium bubbles in nickel. Metallurgical Transactions A 19:4, pages 821-827.
Crossref
J.L. Chaboche. (1987) Continuum damage mechanics: Present state and future trends. Nuclear Engineering and Design 105:1, pages 19-33.
Crossref
J. H. Schneibel & L. Martinez. (1987) Stochastic processes in creep cavitation. Metallurgical Transactions A 18:11, pages 1835-1842.
Crossref
B. Venkataraman & G. Sundararajan. (1987) The effect of matrix constraint on intergranular cavity growth mechanism maps. Materials Science and Engineering 92, pages 113-126.
Crossref
J.C. Earthman & W.D. Nix. (1987) Simulations of stable crack propagation based on cavity growth by coupled diffusional and creep processes. Acta Metallurgica 35:7, pages 1475-1485.
Crossref
D.S. Wilkinson. (1987) The effect of time dependent void density on grain boundary creep fracture—i. continuous void coalescence. Acta Metallurgica 35:6, pages 1251-1259.
Crossref
Atul H. Chokshi & Terence G. Langdon. (1987) A model for diffusional cavity growth in superplasticity. Acta Metallurgica 35:5, pages 1089-1101.
Crossref
C.H. Càceres & S.P. Silvetti. (1987) Cavitation damage in the superplastic Zn-22% Al-0.5% Cu alloy. Acta Metallurgica 35:4, pages 897-906.
Crossref
A.C.F. Cocks & F.A. Leckie. 1987. Advances in Applied Mechanics Volume 25. Advances in Applied Mechanics Volume 25
239
294
.
R. Hales. 1987. Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials. Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials
258
264
.
G. Sundararajan. (1985) Continuous cavity nucleation and creep ductility. Scripta Metallurgica 19:10, pages 1141-1146.
Crossref
G. Sundarajan. (1985) The effect of cavitation and microstructural damage on the intergranular creep fracture of nickel-base superalloys. Materials Science and Engineering 74:1, pages 55-73.
Crossref
H. Trinkaus. (1985) Modeling of helium effects in metals: High temperature embrittlement. Journal of Nuclear Materials 133-134, pages 105-112.
Crossref
P.M. Anderson & J.R. Rice. (1985) Constrained creep cavitation of grain boundary facets. Acta Metallurgica 33:3, pages 409-422.
Crossref
Herbert Schroeder, Wilto Kesternich & Hans Ullmaier. (1985) Helium effects on the creep and fatigue resistance of austenitic stainless steels at high temperatures. Nuclear Engineering and Design. Fusion 2:1, pages 65-95.
Crossref
M. E. Fine & J. R. Weertman. 1985. Time-Dependent Fracture. Time-Dependent Fracture
93
110
.
G. Burger & D. S. Wilkinson. 1985. Time-Dependent Fracture. Time-Dependent Fracture
43
52
.
G.B. Thomas & T.B. Gibbons. (1984) Creep and fracture of a cast NiCr-base alloy containing trace elements. Materials Science and Engineering 67:1, pages 13-23.
Crossref
H. Ullmaier. (1984) The influence of helium on the bulk properties of fusion reactor structural materials. Nuclear Fusion 24:8, pages 1039-1083.
Crossref
M. C. Pandey, A. K. Mukherjee & D. M. R. Taplin. (1984) Prior deformation effects on creep and fracture in inconel alloy X-750. Metallurgical Transactions A 15:7, pages 1437-1441.
Crossref
. (1997) The role of continuum damage in creep crack growth. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences 311:1516, pages 131-158.
Crossref
M.S. Yang, J.R. Weertman & M. Roth. (1984) A test of grain boundary void growth theories by small angle neutron scattering. Scripta Metallurgica 18:5, pages 543-548.
Crossref
H Riedel. (1984) Cavity nucleation at particles on sliding grain boundaries. A shear crack model for grain boundary sliding in creeping polycrystals. Acta Metallurgica 32:3, pages 313-321.
Crossref
V. Sklenička, V. Šustek, I. Saxl & J. Čadek. (1984) An assessment of time and strain to creep fracture in a low alloy heat-resistant CrMoV steel based on a physical-metallurgical approach. Materials Science and Engineering 62:1, pages 1-9.
Crossref
D.R. Hayhurst, W.A. Trampczynski & F.A. Leckie. (1983) On the rôle of cavity nucleation in creep deformation and fracture. Acta Metallurgica 31:10, pages 1537-1542.
Crossref
S. Baik & R. Raj. (1983) Creep-fatigue interaction in OFHC-copper. Scripta Metallurgica 17:9, pages 1087-1090.
Crossref
H. Trinkaus. (1983) On the modeling of the high-temperature embrittlement of metals containing helium. Journal of Nuclear Materials 118:1, pages 39-49.
Crossref
S. Osgerby & T.B. Gibbons. (1983) Creep cavitation in a cast NiCr-base alloy. Materials Science and Engineering 59:2, pages L11-L14.
Crossref
M.S. Loveday & B.F. Dyson. (1983) Prestrain-induced particle microcracking and creep cavitation in IN597. Acta Metallurgica 31:3, pages 397-405.
Crossref
M.F. Ashby. 1983. Advances in Applied Mechanics Volume 23. Advances in Applied Mechanics Volume 23
117
177
.
B.F. Dyson. (1983) Continuous cavity nucleation and creep fracture. Scripta Metallurgica 17:1, pages 31-37.
Crossref
I-Wei Chen. (1983) Mechanisms of cavity growth in creep. Scripta Metallurgica 17:1, pages 17-22.
Crossref
A.S. Argon. (1983) Intergranular cavitation in creeping alloys. Scripta Metallurgica 17:1, pages 5-12.
Crossref
R. Raj. (1983) Correlations between cavitation, creep and dilation for multiaxial loading. Acta Metallurgica 31:1, pages 29-36.
Crossref
C. D. Hamm & R. Pilkington. (1982) The growth of creep cavities in a low alloy steel. Metallurgical Transactions A 13:10, pages 1739-1745.
Crossref
David A. Miller. (1982) A creep-fatigue failure mechanism map for 1CrMoV at 565 °C. Materials Science and Engineering 54:2, pages 273-278.
Crossref
D.A. Miller, C.D. Hamm & J.L. Phillips. (1982) A mechanistic approach to the prediction of creep-dominated failure during simultaneous creep-fatigue. Materials Science and Engineering 53:2, pages 233-244.
Crossref
M.D. Hanna & G.W. Greenwood. (1982) Cavity growth and creep in copper at low stresses. Acta Metallurgica 30:3, pages 719-724.
Crossref
W. Beere & G. Roberts. (1982) Fatigue failure by creep cavity growth at high temperatures. Acta Metallurgica 30:2, pages 571-580.
Crossref
C. Gandhi & R. Raj. (1982) Intergranular fracture in bicrystals—II. Acta Metallurgica 30:2, pages 505-511.
Crossref
A.C.F. Cocks & M.F. Ashby. (1982) On creep fracture by void growth. Progress in Materials Science 27:3-4, pages 189-244.
Crossref
G. W. Greenwood. 1982. Defects and Fracture. Defects and Fracture
233
240
.
S. S. Vagarali & G. R. Odette. (1981) A Model for the Growth of Hydrogen Attack Cavities in Carbon Steels. Metallurgical Transactions A 12:12, pages 2071-2082.
Crossref
B.F. Dyson, A.K. Verma & Z.C. Szkopiak. (1981) The influence of stress state on creep resistance: Experiments and modelling. Acta Metallurgica 29:9, pages 1573-1580.
Crossref
R. Raj & A. K. Ghosh. (1981) Stress rupture. Metallurgical Transactions A 12:7, pages 1291-1302.
Crossref
R. Pilkington, D. A. Miller & D. Worswick. (1981) Cavitation damage and creep crack growth. Metallurgical Transactions A 12:2, pages 173-181.
Crossref
L.-E. Svensson & G. L. Dunlop. (1981) Growth of intergranular creep cavities. International Materials Reviews 26:1, pages 109-131.
Crossref
S.S. Vagarali & G.R. Odette. (1981) A creep fracture model for irradiated and helium injected austenitic stainless steels. Journal of Nuclear Materials 104, pages 1239-1243.
Crossref
G. A. Webster & K. M. Nikbin. 1981. Creep in Structures. Creep in Structures
576
591
.
R. Pilkington, D. A. Miller & D. Worswick. 1981. Creep in Structures. Creep in Structures
525
541
.
H. Riedel. 1981. Creep in Structures. Creep in Structures
504
519
.
L-E. Svensson & G. L. Dunlop. 1981. Creep in Structures. Creep in Structures
445
462
.
B. F. Dyson & M. S. Loveday. 1981. Creep in Structures. Creep in Structures
406
421
.
David A. Miller & Terence G. Langdon. (1980) Density measurements as an assessment of creep damage and cavity growth. Metallurgical Transactions A 11:6, pages 955-962.
Crossref
David A. Miller & Terence G. Langdon. (1980) Independent and sequential cavity growth mechanisms. Scripta Metallurgica 14:1, pages 143-148.
Crossref