Citations (32)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
V Panjkovic & R Gloss. (2012) Fast dynamic heat and mass balance model of walking beam reheat furnace with two-dimensional slab temperature profile. Ironmaking & Steelmaking 39:3, pages 190-209.
Read now
Read now
Chia-Tsung Hsieh, Mei-Jiau Huang, Shih-Tuen Lee & Chao-Hua Wang. (2010) A Numerical Study of Skid Marks on the Slabs in a Walking-Beam Type Slab Reheating Furnace. Numerical Heat Transfer, Part A: Applications 57:1, pages 1-17.
Read now
Read now
Mei-Jiau Huang, Chia-Tsung Hsieh, Shih-Tuen Lee & Chao-Hua Wang. (2008) A Coupled Numerical Study of Slab Temperature and Gas Temperature in the Walking-Beam-Type Slab Reheating Furnace. Numerical Heat Transfer, Part A: Applications 54:6, pages 625-646.
Read now
Read now
Chia-Tsung Hsieh, Mei-Jiau Huang, Shih-Tuen Lee & Chao-Hua Wang. (2008) Numerical Modeling of a Walking-Beam-Type Slab Reheating Furnace. Numerical Heat Transfer, Part A: Applications 53:9, pages 966-981.
Read now
Read now
K. S. Chapman, S. Ramadhyani & R. Viskanta. (1994) Two-Dimensional Modeling and Parametric Studies of Heat Transfer in a Direct-Fired Furnace with Impinging Jets. Combustion Science and Technology 97:1-3, pages 99-120.
Read now
Read now
Articles from other publishers (27)
Wenchao Ji, Guojun Li, Linyang Wei & Zhi Yi. (2021) Modeling and determination of total heat exchange factor of regenerative reheating furnace based on instrumented slab trials. Case Studies in Thermal Engineering 24, pages 100838.
Crossref
Crossref
Leonardo Sales Araujo, Clarissa Hadad de Melo, Rodrigo Pereira Gonçalves, Amanda de Vasconcelos Varela & Luiz Henrique de Almeida. (2019) The effect of a very high overheating on the microstructural degradation of superalloy 718. Journal of Materials Research and Technology 8:1, pages 683-689.
Crossref
Crossref
Alex M. García & Andrés A. Amell. (2018) A numerical analysis of the effect of heat recovery burners on the heat transfer and billet heating characteristics in a walking-beam type reheating furnace. International Journal of Heat and Mass Transfer 127, pages 1208-1222.
Crossref
Crossref
Chao Liang, Darshil R. Patel & Maulik R. Shelat. (2018) Mathematical Modeling of a Long Finned Tube Heating and Cooling in a Multizone Furnace. Journal of Thermal Science and Engineering Applications 10:5.
Crossref
Crossref
Umran Ercetin & Nimeti Doner. (2018) Study of the Heat Transfer of a Large-Scale Tunnel Furnace Based on Numerical Modeling. Journal of Thermal Science and Engineering Applications 10:3.
Crossref
Crossref
Sang Heon Han, Yeon Seung Lee, J.R. Cho & Kyun Ho Lee. (2018) Efficiency analysis of air-fuel and oxy-fuel combustion in a reheating furnace. International Journal of Heat and Mass Transfer 121, pages 1364-1370.
Crossref
Crossref
Yanhao Li, Guangjun Wang & Hong Chen. (2015) Simultaneously estimation for surface heat fluxes of steel slab in a reheating furnace based on DMC predictive control. Applied Thermal Engineering 80, pages 396-403.
Crossref
Crossref
Satish Kumar Dubey & P. Srinivasan. (2014) Development of three dimensional transient numerical heat conduction model with growth of oxide scale for steel billet reheat simulation. International Journal of Thermal Sciences 84, pages 214-227.
Crossref
Crossref
Satish Kumar Dubey & P. Srinivasan. (2014) Steel billet reheat simulation with growth of oxide layer and investigation on zone temperature sensitivity. Journal of Mechanical Science and Technology 28:3, pages 1113-1124.
Crossref
Crossref
Sang Heon Han & Daejun Chang. (2012) Optimum residence time analysis for a walking beam type reheating furnace. International Journal of Heat and Mass Transfer 55:15-16, pages 4079-4087.
Crossref
Crossref
Sang Heon Han & Daejun Chang. (2012) Radiative slab heating analysis for various fuel gas compositions in an axial-fired reheating furnace. International Journal of Heat and Mass Transfer 55:15-16, pages 4029-4036.
Crossref
Crossref
Chao ChenCui Jiao DingDe Gang Ouyang, Zhan Zeng LiuZhong Hua SongSheng ChenChao Yang. (2011) Numerical Simulation and Experiment Research on Temperature Field of Steel Slab in Walking Beam Furnace. Materials Science Forum 704-705, pages 412-418.
Crossref
Crossref
Sang Heon Han, Daejun Chang & Cheol Huh. (2011) Efficiency analysis of radiative slab heating in a walking-beam-type reheating furnace. Energy 36:2, pages 1265-1272.
Crossref
Crossref
A. Steinboeck, D. Wild, T. Kiefer & A. Kugi. (2010) A mathematical model of a slab reheating furnace with radiative heat transfer and non-participating gaseous media. International Journal of Heat and Mass Transfer 53:25-26, pages 5933-5946.
Crossref
Crossref
Jung Hyun Jang, Dong Eun Lee, Man Young Kim & Hyong Gon Kim. (2010) Investigation of the slab heating characteristics in a reheating furnace with the formation and growth of scale on the slab surface. International Journal of Heat and Mass Transfer 53:19-20, pages 4326-4332.
Crossref
Crossref
Sang Heon Han, Daejun Chang & Chang Young Kim. (2010) A numerical analysis of slab heating characteristics in a walking beam type reheating furnace. International Journal of Heat and Mass Transfer 53:19-20, pages 3855-3861.
Crossref
Crossref
Deok-Hong Kang, Sylvie Lorente & Adrian Bejan. (2010) Constructal dendritic configuration for the radiation heating of a solid stream. Journal of Applied Physics 107:11.
Crossref
Crossref
Deok-Hong Kang, Sylvie Lorente & Adrian Bejan. (2010) Constructal architecture for heating a stream by convection. International Journal of Heat and Mass Transfer 53:9-10, pages 2248-2255.
Crossref
Crossref
Hamzeh Jafar Karimi & Mohammad Hassan Saidi. (2010) Heat transfer and energy analysis of a pusher type reheating furnace using oxygen enhanced air for combustion. Journal of Iron and Steel Research International 17:4, pages 12-17.
Crossref
Crossref
Sang Heon Han, Seung Wook Baek & Man Young Kim. (2009) Transient radiative heating characteristics of slabs in a walking beam type reheating furnace. International Journal of Heat and Mass Transfer 52:3-4, pages 1005-1011.
Crossref
Crossref
Jung Hyun Jang, Dong Eun Lee, Chongmin Kim & Man Young Kim. (2008) Prediction of Furnace Heat Transfer and Its Influence on the Steel Slab Heating and Skid Mark Formation in a Reheating Furnace. ISIJ International 48:10, pages 1325-1330.
Crossref
Crossref
Man Young Kim. (2007) A heat transfer model for the analysis of transient heating of the slab in a direct-fired walking beam type reheating furnace. International Journal of Heat and Mass Transfer 50:19-20, pages 3740-3748.
Crossref
Crossref
Sang Heon Han, Seung Wook Baek, Sang Hun Kang & Chang Young Kim. (2007) Numerical analysis of heating characteristics of a slab in a bench scale reheating furnace. International Journal of Heat and Mass Transfer 50:9-10, pages 2019-2023.
Crossref
Crossref
P. V. Barr. (1995) The development, verification, and application of a steady-state thermal model for the pusher-type reheat furnace. Metallurgical and Materials Transactions B 26:4, pages 851-869.
Crossref
Crossref
K. s. Chapman, S. Ramadhyani & R. Viskanta. (1991) Modeling and parametric studies of heat transfer in a direct-fired continuous reheating furnace. Metallurgical Transactions B 22:4, pages 513-521.
Crossref
Crossref
Sung Ho Jeong, Joon Jeong Yi, Jong Keun Kim & Man Yeong Ha. (1991) Computer modeling of the continuous annealing furnace. KSME Journal 5:1, pages 16-21.
Crossref
Crossref
K. S. Chapman, S. Ramadhyani & R. Viskanta. (1990) Modeling and parametric studies of heat transfer in a direct-fired batch reheating furnace. Journal of Heat Treating 8:2, pages 137-146.
Crossref
Crossref