Citations (50)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
Morteza Adineh & Hamid Doostmohammadi. (2019) Microstructure, mechanical properties and machinability of Cu–Zn–Mg and Cu–Zn–Sb brass alloys. Materials Science and Technology 35:12, pages 1504-1514.
Read now
Read now
Zahra Rajabi & Hamid Doostmohammadi. (2018) Effect of addition of tin on the microstructure and machinability of α-brass. Materials Science and Technology 34:10, pages 1218-1227.
Read now
Read now
A. I. Toulfatzis, G. A. Pantazopoulos & A. S. Paipetis. (2016) Microstructure and properties of lead-free brasses using post-processing heat treatment cycles. Materials Science and Technology 32:17, pages 1771-1781.
Read now
Read now
Fritz Klocke, Christoph Nobel & Drazen Veselovac. (2016) Influence of Tool Coating, Tool Material, and Cutting Speed on the Machinability of Low-Leaded Brass Alloys in Turning. Materials and Manufacturing Processes 31:14, pages 1895-1903.
Read now
Read now
V Laporte & A Mortensen. (2009) Intermediate temperature embrittlement of copper alloys. International Materials Reviews 54:2, pages 94-116.
Read now
Read now
W.-G. JUNG & H.-S. SOHN. (2006) KINETIC STUDY ON LEAD REMOVAL FROM MOLTEN COPPER BY GAS BUBBLING. Canadian Metallurgical Quarterly 45:1, pages 17-24.
Read now
Read now
Articles from other publishers (44)
Jacek Skiba, Mariusz Kulczyk, Sylwia Przybysz-Gloc, Monika Skorupska, Julita Smalc-Koziorowska, Mariusz Kobus & Kamil Nowak. (2023) Thermo-Mechanical Treatment for Reducing the Wear Rate of CuCrZr Tool Electrodes during Electro-Discharge Machining. Materials 16:20, pages 6787.
Crossref
Crossref
Jacek Skiba, Mariusz Kulczyk, Sylwia Przybysz-Gloc, Monika Skorupska, Mariusz Kobus & Kamil Nowak. (2023) Effect of microstructure refinement of pure copper on improving the performance of electrodes in electro discharge machining (EDM). Scientific Reports 13:1.
Crossref
Crossref
Lukas Steinhoff, Rico Ottermann, Folke Dencker & Marc Christopher Wurz. (2023) Detailed characterisation of batch-manufactured flexible micro-grinding tools for electrochemical assisted grinding of copper surfaces. The International Journal of Advanced Manufacturing Technology 128:5-6, pages 2301-2310.
Crossref
Crossref
Peter Pavol Monka, Katarina Monkova, George A. Pantazopoulos & Anagnostis I. Toulfatzis. (2023) Effect of Wear on Vibration Amplitude and Chip Shape Characteristics during Machining of Eco-Friendly and Leaded Brass Alloys. Metals 13:5, pages 828.
Crossref
Crossref
Özbey Semih & Artir Recep. (2023) Investigation of microstructure, machinability, and mechanical properties of new-generation hybrid lead-free brass alloys. High Temperature Materials and Processes 42:1.
Crossref
Crossref
Truong Duc Phuc, Pham Hong Phuc, Nguyen Thanh Trung, Hoang Tien Dung & Hoang Trung Kien. 2023. Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022). Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)
513
526
.
Wei Chen, Kai You, Jufang Yin, Ming Chen, Xiaolan Tao, Jiarui Hu, Xiaorong Chen & Qian Lei. (2022) Effect of Ni2Si Precipitates on Microstructure and Mechanical Properties of Cu–Zn Brasses. Metals and Materials International 28:10, pages 2555-2562.
Crossref
Crossref
Qianqian Fu, Bing Li, Minqiang Gao, Ying Fu, Rongzhou Yu, Changfeng Wang & Renguo Guan. (2022) Quantitative mechanisms behind the high strength and electrical conductivity of Cu-Te alloy manufactured by continuous extrusion. Journal of Materials Science & Technology 121, pages 9-18.
Crossref
Crossref
Khurram Yaqoob, Fahim Hashmi & Waqas Hassan Tanveer. (2022) Failure analysis of cartridge brass shell. Engineering Failure Analysis 138, pages 106325.
Crossref
Crossref
Peter Pavol Monka, Katarina Monkova, George Pantazopoulos & Anagnostis I. Toulfatzis. (2022) Effect of Wear on the Vibrating Behaviour of the Tool at Turning CW724R Alloy. Effect of Wear on the Vibrating Behaviour of the Tool at Turning CW724R Alloy.
Jakob Johansson, Per Alm, Rachid M’Saoubi, Per Malmberg, Jan-Eric Ståhl & Volodymyr Bushlya. (2022) On the function of lead (Pb) in machining brass alloys. The International Journal of Advanced Manufacturing Technology 120:11-12, pages 7263-7275.
Crossref
Crossref
Temel Varol, Onur Güler, Serhatcan Berk Akçay & Oğuzhan Çuvalcı. (2022) Enhancement of electrical and thermal conductivity of low-cost novel Cu–Ag alloys prepared by hot-pressing and electroless plating from recycled electrolytic copper powders. Materials Chemistry and Physics 281, pages 125892.
Crossref
Crossref
Paul Stavroulakis, Anagnostis I. Toulfatzis, George A. Pantazopoulos & Alkiviadis S. Paipetis. (2022) Machinable Leaded and Eco-Friendly Brass Alloys for High Performance Manufacturing Processes: A Critical Review. Metals 12:2, pages 246.
Crossref
Crossref
Xiaoshan Huang, Hongliang Zhao, Chengyan Wang & Xinfang Zhang. (2020) One-step separation of hazardous element lead in brass alloy by physical external field. Journal of Cleaner Production 276, pages 123358.
Crossref
Crossref
Younes Ziat, Maryama Hammi, Charaf Laghlimi & Abdelaziz Moutcine. (2020) Investment casting of leaded brass: Microstructure micro-hardness and corrosion protection by epoxy coating. Materialia 12, pages 100794.
Crossref
Crossref
Xin Zhang, Chen Ma, Shufeng Li, Deng Pan & Feiyang Zheng. (2020) Interface design of lead-free free-cutting titanium reinforced graphite brass composites and its effect on mechanical properties and cutting performance. Materials Science and Engineering: A 774, pages 138909.
Crossref
Crossref
Song Zhou, Jiancheng Tang, Miaomiao Xu, Cong Liu, Nan Ye & Fangxin Yu. (2019) A newly lead-free free-cutting as-hydrogenated titanium brass. Materials Research Express 6:7, pages 076502.
Crossref
Crossref
Anton Klimashin. (2019) Kinetics of the Catastrophic Oxidation of Metallic Copper Under the Influence of PbO. Oxidation of Metals 91:3-4, pages 451-462.
Crossref
Crossref
Torsten Wolf, Zongwen Fu & Carolin Körner. (2019) Selective electron beam melting of an aluminum bronze: Microstructure and mechanical properties. Materials Letters 238, pages 241-244.
Crossref
Crossref
George Pashos, George Pantazopoulos & Ioannis Contopoulos. (2018) A Comprehensive CFD Model for Dual-Phase Brass Indirect Extrusion Based on Constitutive Laws: Assessment of Hot-Zone Formation and Failure Prognosis. Metals 8:12, pages 1043.
Crossref
Crossref
Akshay Chaudhari, Zhi Yuan Soh, Hao Wang & A. Senthil Kumar. (2018) Rehbinder effect in ultraprecision machining of ductile materials. International Journal of Machine Tools and Manufacture 133, pages 47-60.
Crossref
Crossref
Anagnostis Toulfatzis, George Pantazopoulos, Constantine David, Dimitrios Sagris & Alkiviadis Paipetis. (2018) Final Heat Treatment as a Possible Solution for the Improvement of Machinability of Pb-Free Brass Alloys. Metals 8:8, pages 575.
Crossref
Crossref
U. Hofmann, C. Nobel, S. Baier, S. Buchkremer, B. Döbbeler & F. Klocke. (2018) Über den Einfluss von Werkstoffkennwerten auf das Spanbruchverhalten von bleiarmem Messing. Materialwissenschaft und Werkstofftechnik 49:6, pages 753-768.
Crossref
Crossref
M. Zohoor & S. Yousefi. (2018) Experimental investigation of the effect of processing parameters on the surface roughness operation for using as expert system database. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:5.
Crossref
Crossref
C. Yang, Z. Ding, Q.C. Tao, L. Liang, Y.F. Ding, W.W. Zhang & Q.L. Zhu. (2018) High-strength and free-cutting silicon brasses designed via the zinc equivalent rule. Materials Science and Engineering: A 723, pages 296-305.
Crossref
Crossref
N.M. Vaxevanidis, N.A. Fountas, A. Koutsomichalis & J.D. Kechagias. (2018) Experimental investigation of machinability parameters in turning of CuZn39Pb3 brass alloy. Procedia Structural Integrity 10, pages 333-341.
Crossref
Crossref
Anagnostis I. Toulfatzis, George A. Pantazopoulos, George J. Besseris & Alkiviadis S. Paipetis. (2016) Machinability evaluation and screening of leaded and lead-free brasses using a non-linear robust multifactorial profiler. The International Journal of Advanced Manufacturing Technology 86:9-12, pages 3241-3254.
Crossref
Crossref
Christoph Nobel, Uwe Hofmann, Fritz Klocke, Drazen Veselovac & Hendrik Puls. (2015) Application of a new, severe-condition friction test method to understand the machining characteristics of Cu–Zn alloys using coated cutting tools. Wear 344-345, pages 58-68.
Crossref
Crossref
Hai-ou ZHUO, Jian-cheng TANG, Ying-yu XUE & Nan YE. (2015) Preparation of lead-free free-cutting graphite brasses by graphitization of cementite. Transactions of Nonferrous Metals Society of China 25:10, pages 3252-3257.
Crossref
Crossref
Christoph Nobel, Uwe Hofmann, Fritz Klocke & Drazen Veselovac. (2015) Experimental investigation of chip formation, flow, and breakage in free orthogonal cutting of copper-zinc alloys. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Hamid Doostmohammadi & Hamid Moridshahi. (2015) Effects of Si on the microstructure, ordering transformation and properties of the Cu60Zn40 alloy. Journal of Alloys and Compounds 640, pages 401-407.
Crossref
Crossref
Peigen Zhang, Yamei Zhang & Zhengming Sun. (2015) Spontaneous Growth of Metal Whiskers on Surfaces of Solids: A Review. Journal of Materials Science & Technology 31:7, pages 675-698.
Crossref
Crossref
Wei Jin, Paul I. Laforest, Alex Luyima, Weldon Read, Luis Navarro & Michael S. Moats. (2015) Electrolytic recovery of bismuth and copper as a powder from acidic sulfate effluents using an emew® cell. RSC Advances 5:62, pages 50372-50378.
Crossref
Crossref
Marco Sortino, Sandro Belfio, Giovanni Totis, Elso Kuljanic & Giovanni Fadelli. (2015) Innovative Tool Coatings for Increasing Tool Life in Milling Nickel-coated Nickel-silver Alloy. Procedia Engineering 100, pages 946-952.
Crossref
Crossref
Z.-Y. Jin, P.-P. Li, B.-Z. Zheng & D. Xiao. (2013) The structure and properties of electroless Ni-Mo-Cr-P coatings on copper alloy. Materials and Corrosion 64:4, pages 341-346.
Crossref
Crossref
H. Atsumi, H. Imai, S. Li, K. Kondoh, Y. Kousaka & A. Kojima. 2012. Advances in Materials Science for Environmental and Energy Technologies. Advances in Materials Science for Environmental and Energy Technologies
47
53
.
Haruhiko Atsumi, Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu Kousaka & Akimichi Kojima. (2012) Fabrication and properties of high-strength extruded brass using elemental mixture of Cu–40% Zn alloy powder and Mg particle. Materials Chemistry and Physics 135:2-3, pages 554-562.
Crossref
Crossref
Haruhiko Atsumi, Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu Kousaka & Akimichi Kojima. (2011) High-strength, lead-free machinable α–β duplex phase brass Cu–40Zn–Cr–Fe–Sn–Bi alloys. Materials Science and Engineering: A 529, pages 275-281.
Crossref
Crossref
Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu KosakaAkimichi KojimaHaruhiko Atsumi & Junko Umeda. (2011) Effect of Chromium Precipitation on Machinability of Sintered Brass Alloys Dispersed with Graphite Particles. MATERIALS TRANSACTIONS 52:7, pages 1426-1430.
Crossref
Crossref
Hisashi Imai, Li Shufeng, Haruhiko Atsumi, Yoshiharu KosakaAkimichi KojimaKatsuyoshi Kondoh. (2010) Development of Lead-Free Machinable Brass with Bismuth and Graphite Particles by Powder Metallurgy Process. MATERIALS TRANSACTIONS 51:5, pages 855-859.
Crossref
Crossref
Anne M. Sandvig, Simoni Triantafyllidou, Marc Edwards, David Heumann, Glen Boyd & Gregory Kirmeyer. (2009) Nonleaded brass-A summary of performance and costs. Journal - American Water Works Association 101:7, pages 83-94.
Crossref
Crossref
Woo-Gwang Jung & Ho-Sang Sohn. (2005) Interpretation of evaporation behavior of lead from molten copper by the mass-transfer model in fluid flow. Metals and Materials International 11:3, pages 233-240.
Crossref
Crossref
Z.M. Sun & M.W. Barsoum. (2011) Spontaneous room temperature extrusion of Pb nano-whiskers from leaded brass surfaces. Journal of Materials Research 20:5, pages 1087-1089.
Crossref
Crossref
G. Mauvoisin, O. Bartier, R. El Abdi & A. Nayebi. (2011) Material Mechanical Properties Influence on the Ratio of Drilling Thrust to Hardness. MRS Proceedings 750.
Crossref
Crossref