Huiya Yang, Yeqiang Bu, Jinming Wu, Youtong Fang, Jiabin Liu, Liuyi Huang & Hongtao Wang. (2022) High strength, high conductivity and good softening resistance Cu-Fe-Ti alloy. Journal of Alloys and Compounds 925, pages 166595.
Crossref

Priyanshi Agrawal, Ravi Sankar Haridas, Priyanka Agrawal & Rajiv S. Mishra. (2022) Deformation based additive manufacturing of a metastable high entropy alloy via Additive friction stir deposition. Additive Manufacturing 60, pages 103282.
Crossref

Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee & Saad Parvez. (2022) Joining of aluminium matrix composites using friction stir welding: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236:5, pages 917-932.
Crossref

Qizhen Li & Xing Jiao. (2019) Recrystallization mechanism and activation energies of severely-deformed magnesium during annealing process. Materialia 5, pages 100188.
Crossref

Ralph Dorward. 2018. Aluminum Science and Technology. Aluminum Science and Technology 279 292 .

Ke Huang, Knut Marthinsen, Qinglong Zhao & Roland E. Logé. (2018) The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials. Progress in Materials Science 92, pages 284-359.
Crossref

Hyun Woo Lee, Tae Kwon Ha, Hyung-Ki Park & Seok-Hong Min. (2016) Recrystallization Behavior of Aluminum Plates Depending on Their Purities. Korean Journal of Materials Research 26:12, pages 688-695.
Crossref

Victoria M. Miller & Tresa M. Pollock. (2016) Texture Modification in a Magnesium-Aluminum-Calcium Alloy During Uniaxial Compression. Metallurgical and Materials Transactions A 47:4, pages 1854-1864.
Crossref

Denise Adorno Lopes, Angelo José de Oliveira Zimmermann, Thomaz Augusto Guisard Restivo & Angelo Fernando Padilha. (2015) Hardness Response Surface for U-7.5Nb-2.5Zr Alloy: A Study of Recovery/Recrystallization and Phase Transformation Interactions. Metallurgical and Materials Transactions E 2:3, pages 147-156.
Crossref

Viseslava Rajkovic, Dusan Bozic, Jelena Stasic, Huaiwen Wang & Milan T. Jovanovic. (2014) Processing, characterization and properties of copper-based composites strengthened by low amount of alumina particles. Powder Technology 268, pages 392-400.
Crossref

Dierk Raabe. 2014. Physical Metallurgy. Physical Metallurgy 2291 2397 .

Fabrício Mendes Souza, Ronald Lesley Plaut, Nelson Batista de Lima, Ricardo do Carmo Fernandes & Angelo Fernando Padilha. (2012) Recrystallization and crystallographic texture in AA4006 aluminum alloy sheets produced by twin roll caster and direct chill processes. Rem: Revista Escola de Minas 65:3, pages 363-370.
Crossref

F. Abd El-Salam, A.M. Abd El-Khalek, R.H. Nada, M.R. Nagy & R. Abd El-Haseeb. (2009) Thermally induced variations in structural and mechanical properties of rapid solidified Tin-based alloys. Materials Science and Engineering: A 506:1-2, pages 135-140.
Crossref

Abhijit Brahme, Joseph Fridy, Hasso Weiland & Anthony D Rollett. (2009) Modeling texture evolution during recrystallization in aluminum. Modelling and Simulation in Materials Science and Engineering 17:1, pages 015005.
Crossref

M. O’Donnell, A. G. Leacock, D. Banabic, D. Brown & R. J. McMurray. (2008) The Effect of Pre-Strain and Solution Heat Treatment on the Formability of a 2024 Aluminium Alloy. International Journal of Material Forming 1:S1, pages 257-260.
Crossref

Naiyu Sun, Burton R. Patterson, Jaakko P. Suni, Roger D. Doherty, Hasso Weiland, Puja Kadolkar, Craig A. Blue & Gregory B. Thompson. (2007) Effect of Heating Rate on Recrystallization of Twin Roll Cast Aluminum. Metallurgical and Materials Transactions A 39:1, pages 165-170.
Crossref

F. Abd El-Salam, A.M. Abd El-Khalek & R.H. Nada. (2007) Study of the structural and mechanical properties of Sn–8.6wt.% Zn alloys using creep measurements. Materials Science and Engineering: A 460-461, pages 14-19.
Crossref

Naiyu Sun, Burton R. Patterson, Jaakko P. Suni, Eider A. Simielli, Hasso Weiland & Lawrence F. Allard. (2006) Microstructural evolution in twin roll cast AA3105 during homogenization. Materials Science and Engineering: A 416:1-2, pages 232-239.
Crossref

J. L. L. Gama, C. C. Dantas, N. F. Quadros, R. A. S. Ferreira & Y. P. Yadava. (2006) Microstructure-mechanical property relationship to copper alloys with shape memory during thermomechanical treatments. Metallurgical and Materials Transactions A 37:1, pages 77-87.
Crossref

Angelo Fernando Padilha & Ronald Lesley Plaut. 2003. Handbook of Aluminum. Handbook of Aluminum.

Jorge A. Ramos, J. Magee & K. G. Watkins. (2001) Microstructure and microhardness study of laser bent Al-2024-T3. Journal of Laser Applications 13:1, pages 32-40.
Crossref

L.P. Troeger & E.A. StarkeJrJr. (2000) Particle-stimulated nucleation of recrystallization for grain-size control and superplasticity in an Al–Mg–Si–Cu alloy. Materials Science and Engineering: A 293:1-2, pages 19-29.
Crossref

L.P. Troeger & E.A. StarkeJrJr. (2000) Microstructural and mechanical characterization of a superplastic 6xxx aluminum alloy. Materials Science and Engineering: A 277:1-2, pages 102-113.
Crossref

R.K Davies, V Randle & G.J Marshall. (1998) Continuous recrystallization—related phenomena in a commercial Al–Fe–Si alloy. Acta Materialia 46:17, pages 6021-6032.
Crossref

M. Ferry & P.R. Munroe. (1994) The effect of matrix temper on particulate integrity in an metal matrix composite. Scripta Metallurgica et Materialia 31:2, pages 143-148.
Crossref

Masamichi Miki & Yoshikiyo Ogino. (1994) Effects of Doped Elements on the Cellular Precipitation in Cu–10Ni–8Sn Alloy. Materials Transactions, JIM 35:5, pages 313-318.
Crossref

Masamichi Miki & Yoshikiyo Ogino. (1994) Effects of Co, Ni and Ti Additions on the Cellular Precipitation in Cu-2%Be Alloy. Materials Transactions, JIM 35:3, pages 161-167.
Crossref

Y. L. Liu, D. Juul Jensen & N. Hansen. (1992) Recovery and recrystallization in Cold-Rolled Al-SiCw composites. Metallurgical Transactions A 23:3, pages 807-819.
Crossref

Marcelo Gonçalves. (1991) On the grain boundary particle pinning during recrystallization of AlLi alloys. Scripta Metallurgica et Materialia 25:4, pages 835-840.
Crossref

Masamichi Miki & Yoshikiyo Ogino. (1991) Influence of Solution-Treatment Conditions on the Cellular Precipitation in Si-Doped Cu–10Ni–8Sn Alloy. Materials Transactions, JIM 32:12, pages 1135-1140.
Crossref

C. Donadille, R. Valle, P. Dervin & R. Penelle. (1989) Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel. Acta Metallurgica 37:6, pages 1547-1571.
Crossref

T. Chandra & R. Kuchlmayr. (1988) Effect of strain rate on sigma formation in ferrite-austenite stainless steel at high temperatures. Journal of Materials Science 23:2, pages 723-728.
Crossref

H. J. McQueen, E. H. Chia & E. A. Starke. (2012) Fe-Particle-Stabilized Aluminum Conductors. JOM 38:4, pages 19-24.
Crossref

J.C.Malzahn Kampe & T.H. Courtney. (1986) Elevated temperature microstructural stability of heavily cold-worked in situ composites. Scripta Metallurgica 20:2, pages 285-289.
Crossref

Victor W. C. Kuo & E. A. Starke. (1985) The development of two texture variants and their effect on the mechanical behavior of a high strength P/M aluminum alloy, X7091. Metallurgical Transactions A 16:6, pages 1089-1103.
Crossref

H. J. Mcqueen & J. J. Jonas. (1984) Recent advances in hot working: Fundamental dynamic softening mechanisms. Journal of Applied Metalworking 3:3, pages 233-241.
Crossref

C.M. Kamma & E. Hornbogen. (1983) The use of microscopic and hardness measurement methods in recrystallization studies. Materials Research Bulletin 18:8, pages 1027-1036.
Crossref

E. A. Starke & F. S. Lin. (1982) The influence of grain structure on the ductility of the al- cu- li- mn- cd alloy 2020. Metallurgical Transactions A 13:12, pages 2259-2269.
Crossref

F. S. Lin, S. B. Chakrabortty & E. A. Starke. (1982) Microstructure-property relationships of two AI-3Li-2Cu-0.2Zr-XCd alloys. Metallurgical Transactions A 13:3, pages 401-410.
Crossref

W. Bleck & H.J. Bunge. (1981) The recrystallization of AlMn 1 investigated with pole figures by number. Acta Metallurgica 29:8, pages 1401-1412.
Crossref

E. A. StarkeJr.Jr., T. H. SandersJr.Jr. & I. G. Palmer. (2013) New Approaches to Alloy Development in the Al-Li System. JOM 33:8, pages 24-33.
Crossref

D. B. Williams & E. P. Butler. (1981) Grain boundary discontinuous precipitation reactions. International Materials Reviews 26:1, pages 153-183.
Crossref

E. L. Brown & A. J. Deardo. (1981) On the origin of equiaxed austenite grains that result from the hot rolling of steel. Metallurgical Transactions A 12:1, pages 39-47.
Crossref

Erhard Hornbogen. (1979) Combined reactions. Metallurgical Transactions A 10:8, pages 947-972.
Crossref

E.L. Brown & A.J. DeArdo. 1979. Strength of Metals and Alloys. Strength of Metals and Alloys 613 618 .

C.McL. Adam & J.A. Eady. (1979) The deformation behaviour of AlAl6Fe eutectic alloys. Acta Metallurgica 27:1, pages 79-87.
Crossref

Celestine Kamma, Joachim Becker & Erhard Hornbogen. (1978) Einflu? des Verteilungsgrades der Carbide auf die Rekristallisation eines untereutektoiden Stahls C 22. Archiv f?r das Eisenh?ttenwesen 49:6, pages 297-302.
Crossref

K. Nakazawa, Y. Kawabe & S. Muneki. (1978) Grain refinement of high-strength maraging steels through cyclic heat treatment. Materials Science and Engineering 33:1, pages 49-56.
Crossref

P. Herbst & J. Huber. 1978. Textures of Materials. Textures of Materials 453 463 .

F.J. Humphreys. (1977) The nucleation of recrystallization at second phase particles in deformed aluminium. Acta Metallurgica 25:11, pages 1323-1344.
Crossref

A.R. Jones & B. Ralph. (1977) Recrystallisation of a supersaturated austenitic stainless steel. Acta Metallurgica 25:8, pages 939-943.
Crossref

J. Dutkiewicz. (1977) Electron microscope study of the effect of deformation on precipitation and recrystallization in copper-titanium alloys. Metallurgical Transactions A 8:5, pages 751-761.
Crossref

E. Hornbogen. 1977. Fundamental Aspects of Structural Alloy Design. Fundamental Aspects of Structural Alloy Design 389 410 .

Celestine Kamma & Erhard Hornbogen. (1976) The effect of carbide particle size on the initiation of recrystallization of a hypoeutectoid steel. Journal of Materials Science 11:12, pages 2340-2344.
Crossref

David B. Snow. (1976) The recrystallization of heavily-drawn Doped Tungsten Wire. Metallurgical Transactions A 7:6, pages 783-794.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Recrystallization Involving a Second Phase

Articles from other publishers (55)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature