Advanced search
Publication Cover
Metal Science Volume 13, 1979 - Issue 3-4: Papers presented at conference on Recrystallization in the Development of Mircostructure held at the University of Leeds on 4-6 April 1978
Journal homepage
128
Views
95
CrossRef citations to date
0
Altmetric
Articles

Recrystallization during hot deformation of aluminium alloys

K. J. Gardner
&
R. Grimes
Pages 216-222 | Published online: 18 Jul 2013

Citations (95)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (13)

Mohamed Saleh, Yoshiaki Morisada, Kohsaku Ushioda & Hidetoshi Fujii. (2023) Microstructural evolution of aluminium in dissimilar A1050/S45C FSW joints by Zn interlayer. Materials Science and Technology 39:17, pages 2722-2729.
Read now
F. Li, R. Fu, D. Feng & Z. Tian. (2014) Microstructure evolution during hot deformation of as cast ESR-CDSed superalloy Rene88DT. Materials Research Innovations 18:sup4, pages S4-421-S4-428.
Read now
. (2011) EDITORIAL. Materials Science and Technology 27:11, pages 1613-1619.
Read now
N. Ridley, E. Cullen & F.J. Humphreys. (2000) Effect of thermomechanical processing on evolution of superplastic microstructures in Al–Cu–Zr alloys. Materials Science and Technology 16:2, pages 117-124.
Read now
H. J. McQueen & O. C. Celliers. (1996) Application of Hot Workability Studies to Extrusion Processing: Part II. Microstructural Development and Extrusion of Al, Al–Mg, and Al–Mg–Mn Alloys. Canadian Metallurgical Quarterly 35:4, pages 305-319.
Read now
B. K. Chen, P. F. Thomson & S. K. Choi. (1992) Computer modelling of microstructure during hot flat rolling of aluminium. Materials Science and Technology 8:1, pages 72-77.
Read now
S. P. Timothy, H. L. Yiu, J. M. Fine & R. A Ricks. (1991) Simulation of single pass of hot rolling deformation of aluminium alloy by plane strain compression. Materials Science and Technology 7:3, pages 255-263.
Read now
A. W. Bowen. (1990) Texture development in high strength aluminium alloys. Materials Science and Technology 6:11, pages 1058-1071.
Read now
F. R. Castro-Fernández & C. M. Sellars. (1988) Static recrystallisation and recrystallisation during hot deformation of Al–1Mg–1Mn alloy. Materials Science and Technology 4:7, pages 621-627.
Read now
M. Ueki, S. Horie & T. Nakamura. (1987) Factors affecting dynamic recrystallization of metals and alloys. Materials Science and Technology 3:5, pages 329-337.
Read now
H. J. Mcqueen, E. Evangelista, J. Bowles & G. Crawford. (1984) Hot deformation and dynamic recrystallization of Al-5Mg-0.8Mn alloy. Metal Science 18:8, pages 395-402.
Read now
T. Sheppard, N. C. Parson & M. A. Zaidi. (1983) Dynamic recrystallization in Al–7Mg alloy. Metal Science 17:10, pages 481-490.
Read now
T. Sheppard & M. G. Tutcher. (1980) Development of duplex deformation substructure during extrusion of a commercial Al-5Mg-0.8Mn alloy. Metal Science 14:12, pages 579-590.
Read now

Articles from other publishers (82)

Muhammad Abubaker Khan, Muhammad Hamza, Jamieson Brechtl, Zahid Nazir, Naeem Akhtar Qaisrani, Ghulam Yasin, Tahir Ahmad, Wei-Bing Liao, Peter K. Liaw & Mohamed A. Afifi. (2023) Development and characterization of a low-density TiNbZrAlTa refractory high entropy alloy with enhanced compressive strength and plasticity. Materials Characterization 205, pages 113301.
Crossref
Mostafa Akbari, Parviz Asadi & Tomasz Sadowski. (2023) A Review on Friction Stir Welding/Processing: Numerical Modeling. Materials 16:17, pages 5890.
Crossref
Anastasiia Dolzhenko, Marina Tikhonova, Rustam Kaibyshev & Andrey Belyakov. (2022) Microstructures and Mechanical Properties of Steels and Alloys Subjected to Large-Strain Cold-to-Warm Deformation. Metals 12:3, pages 454.
Crossref
Hang Z. Yu. 2022. Additive Friction Stir Deposition. Additive Friction Stir Deposition 127 182 .
Hailong Yi, Daixiu Wei, Renyi Xie, Yifan Zhang & Hidemi Kato. (2021) Microstructure Refinement of a Transformation-Induced Plasticity High-Entropy Alloy. Materials 14:5, pages 1196.
Crossref
N. White, K. Eder, J. Byrnes, J.M. Cairney & I.E. McCarroll. (2021) Laser ablation sample preparation for atom probe tomography and transmission electron microscopy. Ultramicroscopy 220, pages 113161.
Crossref
Zhongping Que, Yipeng Zhou, Yun Wang, Chamini L. Mendis & Zhongyun Fan. (2021) Effects of Mg addition on the Al6(Fe,Mn) intermetallic compounds and the grain refinement of α-Al in Al-Fe-Mn alloys. Materials Characterization 171, pages 110758.
Crossref
Artem Alimov, Ivan Kniazkin & Nikolay Biba. 2021. Forming the Future. Forming the Future 1715 1725 .
R. Kalsar, D. Yadav, A. Sharma, H.-G. Brokmeier, J. May, H.W. Höppel, W. Skrotzki & S. Suwas. (2020) Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys. Materials Science and Engineering: A 797, pages 140088.
Crossref
Jialiang Dong, Datong Zhang, Xicai Luo, Weiwen Zhang, Wen Zhang & Cheng Qiu. (2020) EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint. Journal of Materials Research and Technology 9:3, pages 4309-4318.
Crossref
Masahiro ArakiKenji Matsuda. (2020) Effect of Composition on Recrystallization Texture Formation of Aluminum Extrusions. MATERIALS TRANSACTIONS 61:1, pages 104-110.
Crossref
Nastaran Naghshehkesh, Seyed Elias Mousavi, Fathallah Karimzadeh, Ali Ashrafi, Martin Nosko, Veronika Trembošová & Behzad Sadeghi. (2019) Effect of graphene oxide and friction stir processing on microstructure and mechanical properties of Al5083 matrix composite. Materials Research Express 6:10, pages 106566.
Crossref
Lei Liu, Yunxin Wu, Hai Gong, Shuang Li & A. S. Ahmad. (2018) A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process. Materials 11:8, pages 1443.
Crossref
Ke Huang, Knut Marthinsen, Qinglong Zhao & Roland E. Logé. (2018) The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials. Progress in Materials Science 92, pages 284-359.
Crossref
Thomas Dorin, Mahendra Ramajayam, Alireza Vahid & Timothy Langan. 2018. Fundamentals of Aluminium Metallurgy. Fundamentals of Aluminium Metallurgy 439 494 .
. 2017. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena 647 681 .
K. Huang & R.E. Logé. (2016) A review of dynamic recrystallization phenomena in metallic materials. Materials & Design 111, pages 548-574.
Crossref
Shenbao Jin, Nairong Tao, Knut Marthinsen & Yanjun Li. (2015) Deformation of an Al–7Mg alloy with extensive structural micro-segregations during dynamic plastic deformation. Materials Science and Engineering: A 628, pages 160-167.
Crossref
Luo-xing LI, Guan WANG, Jie LIU & Zai-qi YAO. (2014) Flow softening behavior and microstructure evolution of Al–5Zn–2Mg aluminum alloy during dynamic recovery. Transactions of Nonferrous Metals Society of China 24:1, pages 42-48.
Crossref
M. A. Ryazantseva, A. V. Mikhailovskaya, A. S. Bychkov, A. N. Solonin & I. S. Golovin. (2012) A study of softening processes in heating of cold-deformed sheets of low-alloy aluminum alloys. Metal Science and Heat Treatment 54:5-6, pages 253-258.
Crossref
A. V. Mikhaylovskaya, M. A. Ryazantseva, I. S. Golovin & V. K. Portnoi. (2012) Effect of microadditions of magnesium and zinc in aluminum upon heating of cold-rolled sheets. The Physics of Metals and Metallography 113:8, pages 795-802.
Crossref
F.C. Liu, P. Xue & Z.Y. Ma. (2012) Microstructural evolution in recrystallized and unrecrystallized Al–Mg–Sc alloys during superplastic deformation. Materials Science and Engineering: A 547, pages 55-63.
Crossref
I. S. Golovin, A. V. Mikhailovskaya, M. A. Ryazantseva, A. Yu. Geptin & A. N. Solonin. (2011) Investigation of recrystallization in an Al-0.3 Mg alloy by the method of internal friction. The Physics of Metals and Metallography 112:6, pages 622-632.
Crossref
Hideo YoshidaHidetoshi Uchida. (2011) Al–Mg Alloys（2）Al–Mg系合金（2）. Journal of Japan Institute of Light Metals 61:11, pages 684-697.
Crossref
Hideo YoshidaHidetoshi Uchida. (2011) Al–Mg Alloys（1）Al–Mg系合金（1）. Journal of Japan Institute of Light Metals 61:10, pages 568-582.
Crossref
Enrico Evangelista. 2011. Hot Deformation and Processing of Aluminum Alloys. Hot Deformation and Processing of Aluminum Alloys 143 190 .
Enrico Evangelista. 2011. Hot Deformation and Processing of Aluminum Alloys. Hot Deformation and Processing of Aluminum Alloys 87 142 .
A.J. Barnes, M.J. Stowell, Roger Grimes, D.B. Laycock & B.M. Watts. (2010) Forty Years since the Invention of SUPRAL Alloys and Look where we Are now. Key Engineering Materials 433, pages 11-30.
Crossref
C. Zubizarreta, S. Giménez, J.M. Martín & I. Iturriza. (2009) Effect of the heat treatment prior to extrusion on the direct hot-extrusion of aluminium powder compacts. Journal of Alloys and Compounds 467:1-2, pages 191-201.
Crossref
P. Sherstnev, S. Mitsche, C. Sommitsch, C. Melzer, M. Hacksteiner & T. Ebner. (2008) Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083Modelling of the Recrystallisation Kinetics during Hot Forming of Aluminium Alloy 5083. BHM Berg- und Hüttenmännische Monatshefte 153:11, pages 439-442.
Crossref
S.C. Hogg, I.G. Palmer, L.G. Thomas & P.S. Grant. (2007) Processing, microstructure and property aspects of a spraycast Al–Mg–Li–Zr alloy. Acta Materialia 55:6, pages 1885-1894.
Crossref
. 2007. Thermo-Mechanical Processing of Metallic Materials. Thermo-Mechanical Processing of Metallic Materials 475 517 .
R. W. Fonda & J. F. Bingert. (2006) Precipitation and grain refinement in a 2195 Al friction stir weld. Metallurgical and Materials Transactions A 37:12, pages 3593-3604.
Crossref
John F. Humphreys. 2006. Materials Science and Technology. Materials Science and Technology.
Young-Sang Na, Jong-Taek Yeom, Nho-Kwang Park & Jai-Young Lee. (2006) Electron backscatter diffraction analysis of dynamically recrystallized grain structures in a Ni-Cr-Fe base alloy. Metallurgical and Materials Transactions A 37:1, pages 41-47.
Crossref
Wang Mengjun, Gan Chunlei & Liu Xinyu. (2005) Deformation behavior of 6063 aluminum alloy during high-speed compression. Journal of Wuhan University of Technology-Mater. Sci. Ed. 20:3, pages 40-43.
Crossref
P.B. Prangnell & C.P. Heason. (2005) Grain structure formation during friction stir welding observed by the ‘stop action technique’. Acta Materialia 53:11, pages 3179-3192.
Crossref
William H. Van Geertruyden, Heather M. Browne, Wojciech Z. Misiolek & Paul T. Wang. (2005) Evolution of surface recrystallization during indirect extrusion of 6xxx aluminum alloys. Metallurgical and Materials Transactions A 36:4, pages 1049-1056.
Crossref
M.J. Ashton & John F. Humphreys. (2004) Inhomogeneous Deformation and Microstructural Evolution during the Hot Deformation of Al-4.98%Mg. Materials Science Forum 467-470, pages 117-122.
Crossref
A. Dehghan-Manshadi, Hossein Beladi, Matthew R. Barnett & Peter D. Hodgson. (2004) Recrystallization in 304 Austenitic Stainless Steel. Materials Science Forum 467-470, pages 1163-1168.
Crossref
. 2004. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena 557 615 .
Weimin Mao. 2003. Handbook of Aluminum. Handbook of Aluminum.
H. J. McQueen. (2002) Elevated-temperature deformation at forming rates of 10−2 to 102 s−1. Metallurgical and Materials Transactions A 33:2, pages 345-362.
Crossref
H.J McQueen & W Blum. (2000) Dynamic recovery: sufficient mechanism in the hot deformation of Al (<99.99). Materials Science and Engineering: A 290:1-2, pages 95-107.
Crossref
B. V. Radhakrishna Bhat, Y. R. Mahajan & Y. V. R. K. Prasad. (2000) Effect of volume fraction of SiC p reinforcement on the processing maps for 2124 Al matrix composites. Metallurgical and Materials Transactions A 31:3, pages 629-639.
Crossref
T. C. Schulthess, P. E. A. Turchi, A. Gonis & T.-G. Nieh. 1997. Properties of Complex Inorganic Solids. Properties of Complex Inorganic Solids 383 388 .
J. Liu & D.J. Chakrabarti. (1996) Grain structure and microtexture evolution during superplastic forming of a high strength AlZnMgCu alloy. Acta Materialia 44:12, pages 4647-4661.
Crossref
W. Blum, Q. Zhu, R. Merkel & H.J. McQueen. (1996) Geometric dynamic recrystallization in hot torsion of Al5Mg0.6Mn (AA5083). Materials Science and Engineering: A 205:1-2, pages 23-30.
Crossref
H. J. McQueen, E. Evangelista, N. Jin & M. E. Kassner. (1995) Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery. Metallurgical and Materials Transactions A 26:7, pages 1757-1766.
Crossref
N. Q. Chinh, J. Illy, A. Juhász & J. Lendvai. (1995) Mechanical properties and superplasticity of AlZnMg alloys with copper and zirconium additions. Physica Status Solidi (a) 149:2, pages 583-599.
Crossref
E.V. Konopleva, H.J. McQueen & E. Evangelista. (1995) Serrated grain boundaries in hot-worked aluminum alloys at high strains. Materials Characterization 34:4, pages 251-264.
Crossref
J. Sarkar, Y. V. R. K. Prasad & M. K. Surappa. (2004) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. Journal of Materials Science 30:11, pages 2843-2848.
Crossref
. 1995. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena 449 488 .
H.J. McQueen, W. Blum, S. Straub & M.E. Kassner. (1993) Dynamic grain growth a restoration mechanism in 99.999 Al. Scripta Metallurgica et Materialia 28:10, pages 1299-1304.
Crossref
D. Padmavardhani & Y. V. R. K. Prasad. (1993) Processing maps for hot working of Cu-Ni-Zn alloys. Journal of Materials Science 28:19, pages 5269-5274.
Crossref
J. P. Lin, X. Y. An & T. Q. Lei. (1993) Dynamic recrystallization during hot-rolling in Al-6Mg alloy. Journal of Materials Science Letters 12:11, pages 850-851.
Crossref
D. Padmavardhani & Y.V.R.K. Prasad. (1992) Effect of zinc content on the processing map for hot working of α brass. Materials Science and Engineering: A 157:1, pages 43-51.
Crossref
J.P. Lin, T.C. Lei & X.Y. An. (1992) Dynamic recrystallization during hot compression in AlMg alloy. Scripta Metallurgica et Materialia 26:12, pages 1869-1874.
Crossref
G. A. Henshall, M. E. Kassner & H. J. McQueen. (1992) Dynamic restoration mechanisms in Al-5.8 At. Pct Mg deformed to large strains in the solute drag regime. Metallurgical Transactions A 23:3, pages 881-889.
Crossref
Oscar A. KaibyshevOscar A. Kaibyshev. 1992. Superplasticity of Alloys, Intermetallides and Ceramics. Superplasticity of Alloys, Intermetallides and Ceramics 92 116 .
N. Ravichandran & Y. V. R. K. Prasad. (1991) Dynamic recrystallization during hot deformation of aluminum: A study using processing maps. Metallurgical Transactions A 22:10, pages 2339-2348.
Crossref
B. Obst & A. Nyilas. (1991) Experimental evidence on the dislocation mechanism of serrated yielding in f.c.c. metals and alloys at low temperatures. Materials Science and Engineering: A 137, pages 141-150.
Crossref
Taku Sakai & Chiori Takahashi. (1991) Flow Softening of 7075 Aluminum Alloy under Hot Compression. Materials Transactions, JIM 32:4, pages 375-382.
Crossref
E. Evangelista, A. Forcellese, F. Gabrielli & P. Mengucci. (1990) Hot formability of AA 6061 PM aluminium alloy. Journal of Materials Processing Technology 24, pages 323-332.
Crossref
J.F. Mao, X.Y. An & T.Q. Lei. (1990) Dynamic restoration of hot-rolled Al-Mg alloys. Materials Chemistry and Physics 25:3, pages 297-305.
Crossref
Martyn R. Drury & Janos L. Urai. (1990) Deformation-related recrystallization processes. Tectonophysics 172:3-4, pages 235-253.
Crossref
S.P. Timothy, H.L. Yiu, J.M. Fine & R.A. Ricks. 1990. Production, Refining, Fabrication and Recycling of Light Metals. Production, Refining, Fabrication and Recycling of Light Metals 111 129 .
E. Evangelista, F. Gabrielli, P. Mengucci & E. Quadrini. 1989. Strength of Metals and Alloys (ICSMA 8). Strength of Metals and Alloys (ICSMA 8) 977 982 .
H. J. McQueen & E. Evangelista. (1988) Substructures in aluminium from dynamic and static recovery. Czechoslovak Journal of Physics 38:4, pages 359-372.
Crossref
Sheng-Long Lee & Shinn-Tyan Wu. (1987) Identification of dispersoids in Al-Mg alloys containing Mn. Metallurgical Transactions A 18:8, pages 1353-1357.
Crossref
P. Olla & P. F. Virdis. (1987) High temperature deformation of a commercial aluminum alloy. Metallurgical Transactions A 18:2, pages 293-301.
Crossref
P. Olla & P. F. Virdis. (1987) High temperature deformation of a commercial aluminum alloy. Metallurgical Transactions A 18:3, pages 293-301.
Crossref
M.R. Drury & F.J. Humphreys. (1986) The development of microstructure in Al-5% Mg during high temperature deformation. Acta Metallurgica 34:11, pages 2259-2271.
Crossref
J. L. Urai, W. D. Means & G. S. Lister. 1986. Mineral and Rock Deformation: Laboratory Studies. Mineral and Rock Deformation: Laboratory Studies 161 199 .
R.D. Doherty, Ho-In Lee & E.A. Feest. (1984) Microstructure of stir-cast metals. Materials Science and Engineering 65:1, pages 181-189.
Crossref
H. J. Mcqueen & J. J. Jonas. (1984) Recent advances in hot working: Fundamental dynamic softening mechanisms. Journal of Applied Metalworking 3:3, pages 233-241.
Crossref
T. Sakai & J.J. Jonas. (1984) Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations. Acta Metallurgica 32:2, pages 189-209.
Crossref
Jeff W. Edington. (1982) Microstructural aspects of superplasticity. Metallurgical Transactions A 13:5, pages 703-715.
Crossref
F.J. Humphreys. 1982. Strength of Metals and Alloys (ICSMA 6). Strength of Metals and Alloys (ICSMA 6) 625 630 .
Rishi Raj. (1981) Development of a Processing Map for Use in Warm-Forming and Hot-Forming Processes. Metallurgical Transactions A 12:6, pages 1089-1097.
Crossref
Yu. P. Pshenichnov, V. D. Makarov, N. K. Gribova & Yu. V. Gusev. (1981) Conditions for superplasticity of aluminum alloy 1201. Metal Science and Heat Treatment 23:3, pages 185-188.
Crossref
Tadashi MAKI, Koichi AKASAKA, Koji OKUNOImao TAMURA. (1980) Dynamic Recrystallization of Austenite in 18-8 Stainless Steel and 18 Ni Maraging Steel and Its Related Phenomena. Tetsu-to-Hagane 66:12, pages 1659-1668.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.