Citations (122)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (24)
M. S. Prabhudev & S. A. Kori. (2022) Dry sliding wear characteristics of Al-7Si-0.3Mg alloy with minor additions of magnesium at high temperature. Tribology - Materials, Surfaces & Interfaces 16:1, pages 2-9.
Read now
Read now
X. Dai, H. Zhang, H. Zhang, J. Liu & J. Feng. (2016) Arc assisted ultrasonic seam welding of Mg/Al joints with Zn interlayer. Materials Science and Technology 32:2, pages 164-172.
Read now
Read now
J. Malavazi, R. Baldan & A. Augusto Couto. (2015) Microstructure and mechanical behaviour of Al9Si alloy with different Fe contents. Materials Science and Technology 31:6, pages 737-744.
Read now
Read now
J. Domitner, S. Bozorgi, K. Anders, C. Angermeier & P. Schumacher. (2015) Experimental investigations on energy absorption capacity of selected Al–Si–Mg casting alloys. Materials Science and Technology 31:1, pages 85-93.
Read now
Read now
M O Shabani, A Mazahery, P Davami & M Razavi. (2012) Silicon morphology modelling during solidification process of A356 Al alloy. International Journal of Cast Metals Research 25:1, pages 53-58.
Read now
Read now
I. S. El-Mahallawi, Y. Shash, K. Eigenfeld, T. S. Mahmoud, R. M. Ragaie, A. Y. Shash & M. A. El Saeed. (2010) Influence of nanodispersions on strength–ductility properties of semisolid cast A356 Al alloy. Materials Science and Technology 26:10, pages 1226-1231.
Read now
Read now
D. K. Dwivedi, A. Sharma & T. V. Rajan. (2008) Effect of material and test parameters on wear behaviour of eutectic Al–Si alloy (LM13). International Journal of Cast Metals Research 21:6, pages 439-444.
Read now
Read now
D. K. Dwivedi, R. Sharma & A. Kumar. (2006) Influence of silicon content and heat treatment parameters on mechanical properties of cast Al–Si–Mg alloys. International Journal of Cast Metals Research 19:5, pages 275-282.
Read now
Read now
Rajesh Sharma, Anesh Kumar & D. K. Dwivedi. (2006) Influence of Solution Temperature on Microstructure and Mechanical Properties of Two Cast Al–Si Alloys. Materials and Manufacturing Processes 21:3, pages 309-314.
Read now
Read now
Dheerendra
Kumar Dwivedi, A. Sharma & T. V. Rajan. (2005) Influence of Silicon Morphology and Mechanical Properties of Piston Alloys. Materials and Manufacturing Processes 20:5, pages 777-791.
Read now
Read now
T. O. Mbuya, B. O. Odera & S. P. Ng'ang'a. (2003) Influence of iron on castability and properties of aluminium silicon alloys: literature review. International Journal of Cast Metals Research 16:5, pages 451-465.
Read now
Read now
Y. Liu & J. Wang. (2002) Tribological behaviour and worn out surface analysis of hot extruded Al-Si-Pb alloys. Materials Science and Technology 18:11, pages 1293-1300.
Read now
Read now
R. Doglione, J. L. Douziech, C. Berdin & D. François. (2002) Tensile damage stages in cast A356-T6 aluminium alloy. Materials Science and Technology 18:5, pages 554-562.
Read now
Read now
M. A. Moustafa, F. H. Samuel, H. W. Doty & S. Valtierra. (2002) Effect of Mg and Cu additions on the microstructural characteristics and tensile properties of Sr-modified Al-Si eutectic alloys. International Journal of Cast Metals Research 14:4, pages 235-253.
Read now
Read now
P. A. Rometsch, G. B. Schaffer & J. A. Taylor. (2001) Mass balance characterisation of Al-7Si-Mg alloy microstructures as a function of solution treatment time. International Journal of Cast Metals Research 14:1, pages 59-69.
Read now
Read now
G. Atxaga, A. Pelayo & A.M. Irisarri. (2001) Effect of microstructure on fatigue behaviour of cast Al–7Si–Mg alloy. Materials Science and Technology 17:4, pages 446-450.
Read now
Read now
C.H. Cáceres & J. Barresi. (2000) Selection of temper and Mg content to optimise the Quality Index of Al-7Si-Mg casting alloys. International Journal of Cast Metals Research 12:6, pages 377-384.
Read now
Read now
L. Siaminwe & A.J. Clegg. (1999) Effect of processing variables on structure and tensile properties of investment cast Al–Si–Mg casting alloy. Materials Science and Technology 15:7, pages 812-820.
Read now
Read now
D. L. Zhang, L. H Zheng & D. H. StJohn. (1998) Effect of solution treatment temperature on tensile properties of AI-7Si-O.3Mg (wt-%) alloy. Materials Science and Technology 14:7, pages 619-625.
Read now
Read now
J. Guo, H. Zhu & J. Jia. (1998) Mechanical properties of Al-7Si-Mg casting alloy under various aging conditions. Materials Science and Technology 14:5, pages 476-478.
Read now
Read now
P. A. Karnezis, G. Durrant & B. Cantor. (1998) Microstructure and tensile properties of squeeze cast SiC particulate reinforced AI-7Si alloy. Materials Science and Technology 14:2, pages 97-107.
Read now
Read now
S. Murali, S. Muthukkaruppan, K. S. Raman & K. S. S. Murthy. (1997) Stir cast and extruded Al-7Si-0.3Mg alloy containing iron and beryllium. Materials Science and Technology 13:4, pages 337-342.
Read now
Read now
T. Din & J. Campbell. (1996) High strength aerospace aluminium casting alloys: a comparative study. Materials Science and Technology 12:8, pages 644-650.
Read now
Read now
S. Murali, K. S. Raman & K. S. S. Murthy. (1994) Effect of Trace Additions (Be, Cr, Mn and Co) on the Mechanical Properties and Fracture Toughness of Fe-containing Al-7Si-0.3Mg Alloy. Cast Metals 6:4, pages 189-198.
Read now
Read now
Articles from other publishers (98)
Wenyan Zhai, Haohan Sun, Liang Sun, Qian Zhao, Yanming Liu, Yiran Wang, Bowei Pu, Bangyan Zhang & Shiqing Wang. (2023) Influence of Cu content on mechanical and tribological properties of Al–7Si–Cu alloy. Journal of Materials Research and Technology 26, pages 4848-4859.
Crossref
Crossref
Huidi Zhang, Bin Chen, Jianfei Hao, Huishu Wu, Ming Chen, Weirong Li, Runxia Li & Biao Wang. (2023) Effects of Cu/Er on Tensile Properties of Cast Al-Si Alloy at Low Temperature. Materials 16:3, pages 902.
Crossref
Crossref
Kashimata Nithesh, Rajesh Nayak, Rajarama Hande, Sathyashankara Sharma, Mandya Channegowda Gowri Shankar & Srinivas Doddapaneni. (2023) Dual role of trace elements in magnesium dissolved age hardened A356 alloy on microstructure and peak micro hardness. Manufacturing Review 10, pages 5.
Crossref
Crossref
Cássio Silva, André Barros, Adilson Vitor Rodrigues, Rafael Kakitani, Thiago Soares, Amauri Garcia & Noé Cheung. (2022) Microstructure and Tensile Strength of an Al-Si-Fe-V Alloy: Vanadium and Solidification Thermal Parameters as Recycling Strategies. Sustainability 14:21, pages 13859.
Crossref
Crossref
Sangjun Lee, Heon Kang, Jonggyu Jeon & Donghyun Bae. (2022) Influence of the Composition and Vacancy Concentration on Cluster Decomposition Behavior in Al–Si–Mg Alloy: A Kinetic Monte Carlo Study. Materials 15:19, pages 6552.
Crossref
Crossref
H. R. Ammar, A. M. Samuel, H. W. Doty & F. H. Samuel. (2021) Premium Strength and Optimum Quality in Al-Si-Mg/Al-Si-Mg-Cu Cast Alloys Using Two Different Types of Molds. International Journal of Metalcasting 16:3, pages 1347-1362.
Crossref
Crossref
Cássio Silva, André Barros, Talita Vida, Amauri Garcia, Noé Cheung, Danieli A. P. Reis & Crystopher Brito. (2022) Assessing Microstructure Tensile Properties Relationships in Al-7Si-Mg Alloys via Multiple Regression. Metals 12:6, pages 1040.
Crossref
Crossref
Guanghui Ma, Mengmeng Yang, Zhe Geng, Yunpeng Ding, Hai Liu & Yujing Jin. (2022) Effect of Heat Treatment on Mechanical Properties and Fracture Behavior of Al-7.0Si-0.3Mg Alloy at Low Temperature. Crystals 12:4, pages 563.
Crossref
Crossref
Randy Beals, Xiaoping Niu & Zach Brown. 2022. Light Metals 2022. Light Metals 2022
73
82
.
A. Mukund, Aditya Suresh Nair, S. Nived, R. Raagavendran, Akhil Premkumar, A. Nidhin Raj & Karthik V. Shankar. (2021) Impact of solutionising temperature on the microstructure, hardness and tensile strength of Al-6.6Si-0.3Mg-3Ni alloys. Materials Today: Proceedings 38, pages 2117-2122.
Crossref
Crossref
Bharat Gwalani, Matthew Olszta, Soumya Varma, Lei Li, Ayoub Soulami, Elizabeth Kautz, Siddhartha Pathak, Aashish Rohatgi, Peter V. Sushko, Suveen Mathaudhu, Cynthia A. Powell & Arun Devaraj. (2020) Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy. Communications Materials 1:1.
Crossref
Crossref
K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata & S. Kamado. (2020) Effect of Mg content on age-hardening response, tensile properties, and microstructures of a T5-treated thixo-cast hypoeutectic Al–Si alloy. Materials Science and Engineering: A 798, pages 140089.
Crossref
Crossref
K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata & S. Kamado. (2020) Influence of process conditions on microstructures and mechanical properties of T5-treated 357 aluminum alloys. Journal of Alloys and Compounds 834, pages 155133.
Crossref
Crossref
Chun Xia Wang, Sai Chang, Gang Chen Sun & Ze Qing Zhang. (2020) Effect of Tool Rotation Speed on the Microstructure and Mechanical Properties of Al-12.7 % Si Alloy by Friction Stir Processing. Materials Science Forum 1001, pages 155-160.
Crossref
Crossref
B. Girinath, N. Siva Shanmugam & C. Sathiyanarayanan. (2020) Studies on influence of torch orientation on microstructure, mechanical properties and formability of AA5052 CMT welded blanks. Archives of Civil and Mechanical Engineering 20:1.
Crossref
Crossref
M. Colombo, R. H. Buzolin, E. Gariboldi, L. Rovatti, R. Vallant & C. Sommitsch. (2019) Effects of Er and Zr Additions on the As-Cast Microstructure and on the Solution-Heat-Treatment Response of Innovative Al-Si-Mg-Based Alloys. Metallurgical and Materials Transactions A 51:2, pages 1000-1011.
Crossref
Crossref
Yasin ALEMDAG & Murat BEDER. (2019) Effects of zinc content on strength and wear performance of Al−12Si−3Cu based alloy. Transactions of Nonferrous Metals Society of China 29:12, pages 2463-2471.
Crossref
Crossref
O. Prach, O. Trudonoshyn, P. Randelzhofer, С. Körner & K. Durst. (2019) Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys. Materials Science and Engineering: A 759, pages 603-612.
Crossref
Crossref
Riccardo Casati & Maurizio Vedani. (2018) Aging Response of an A357 Al Alloy Processed by Selective Laser Melting. Advanced Engineering Materials 21:4.
Crossref
Crossref
Cássio da Silva, Thiago Soares, Noé Cheung, Amauri Garcia, Danieli A. P. Reis & Crystopher Brito. (2019) Dendritic Spacing and Macrosegregation Affecting Microhardness of an Al-Si-Mg Alloy Solidified Under Unsteady State Conditions. Materials Research 22:suppl 1.
Crossref
Crossref
S. V. Medvedeva, V. S. Zolotarevskii & O. A. Yakovtseva. (2019) Possibility of Elevation of Mechanical Properties of Sand-Cast Copper Silumins. Metal Science and Heat Treatment 60:9-10, pages 560-565.
Crossref
Crossref
Shakir Gatea, Hengan Ou & Graham McCartney. (2018) Deformation and fracture characteristics of Al6092/SiC/17.5p metal matrix composite sheets due to heat treatments. Materials Characterization 142, pages 365-376.
Crossref
Crossref
M.Madhu Vamsi, V. Pradeep Kumar & S.H. Shariff. (2018) A Feasibility Report on the Comparsion of the Characteristics of Manufacturing a Bearing Cover by the Processes of Sand Casting and Shell Moulding. Advanced Materials Research 1148, pages 204-210.
Crossref
Crossref
Williams S. Ebhota & Tien-Chien Jen. 2018. Intermetallic Compounds - Formation and Applications. Intermetallic Compounds - Formation and Applications.
P. Orozco, S. Maldonado, R. Muñiz, F. Equihua, S. Luna, J. Ortiz, A. García, L. Castruita & A. Hernández. (2017) Effect of oxide films on formation of Fe-rich intermetallic phases in aluminum alloys. Journal of Thermal Analysis and Calorimetry 131:3, pages 2329-2335.
Crossref
Crossref
M. Rahman, S. H. Sabbir, M. S. Kabir, M. S. Kaiser & M. Al Nur. Study of precipitation behaviour of hyper-eutectic Al-Si automotive alloy. Study of precipitation behaviour of hyper-eutectic Al-Si automotive alloy.
Mohamed Ramadan. Influence of gating design on microstructure and fluidity of thin sections AA320.0 cast hypo-eutectic Al-Si alloy. Influence of gating design on microstructure and fluidity of thin sections AA320.0 cast hypo-eutectic Al-Si alloy.
H. Tiwery, W. Hoziefa, Adel B. El-Shabasy & I. El-Mahallawi. 2018. Light Metals 2018. Light Metals 2018
1105
1111
.
Imane Outmani, Laurence Fouilland-Paille, Jérôme Isselin & Mohamed El Mansori. (2017) Effect of Si, Cu and processing parameters on Al-Si-Cu HPDC castings. Journal of Materials Processing Technology 249, pages 559-569.
Crossref
Crossref
Yong-Lak Choi, Seon-Hwa Kim, Dong-Hyun Kim, Sang-Il Yoon & Ki-Sun Kim. (2017) Influence of Sr and TiB on the Microstructure and Eutectic Temperature of Al-12Si Die-Cast Alloys. Korean Journal of Materials Research 27:10, pages 544-551.
Crossref
Crossref
Naor Elad Uzan, Roni Shneck, Ori Yeheskel & Nachum Frage. (2017) Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM). Materials Science and Engineering: A 704, pages 229-237.
Crossref
Crossref
N. Nagendran, V.K. Shanmuganathan, N. Gayathri & G. Dinesh Ram. (2017) Wear Analysis of LM 25 (A356) Alloy Manufactured by Squeeze Casting. Applied Mechanics and Materials 867, pages 157-164.
Crossref
Crossref
Abul Hossain, Fahmida Gulshan & Abu Syed Wais Kurny. 2017. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
A. Y. Shash, I. S. El-Mahallawi & A. E. Amer. 2017. Properties and Characterization of Modern Materials. Properties and Characterization of Modern Materials
1
12
.
K. Wang, H.Y. Jiang, Q.D. Wang, B. Ye & W.J. Ding. (2016) Nanoparticle-induced nucleation of eutectic silicon in hypoeutectic Al-Si alloy. Materials Characterization 117, pages 41-46.
Crossref
Crossref
Xiangyu Dai, Hongtao Zhang, Bo Wang, Ang Ji, Jihou Liu & Jicai Feng. (2016) Improving weld strength of arc-assisted ultrasonic seam welded Mg/Al joint with Sn interlayer. Materials & Design 98, pages 262-271.
Crossref
Crossref
L. John Baruch, R. Raju, V. Balasubramanian, A. G. Rao & I. Dinaharan. (2016) Influence of Multi-pass Friction Stir Processing on Microstructure and Mechanical Properties of Die Cast Al–7Si–3Cu Aluminum Alloy. Acta Metallurgica Sinica (English Letters) 29:5, pages 431-440.
Crossref
Crossref
Sumit Meenia, F. Khan MD, S. Babu, R.J. Immanuel, S.K. Panigrahi & G.D. Janaki Ram. (2016) Particle refinement and fine-grain formation leading to enhanced mechanical behaviour in a hypo-eutectic Al–Si alloy subjected to multi-pass friction stir processing. Materials Characterization 113, pages 134-143.
Crossref
Crossref
Young-Hee Cho, Jung-Moo Lee, Jin-Woo Jin & Jae-Gil Jung. (2016) Improvement of the Mechanical Properties of Al-7Si-0.35Mg Cast Alloys by the Optimised Combination of Alloying Elements and Heat Treatment. Journal of Korea Foundry Society 36:1, pages 1-9.
Crossref
Crossref
D.P. Davies & S.L. Jenkins. (2016) Assessment of a controlled solidification aluminium investment casting technique for use in helicopter gearboxes. Materials Science and Engineering: A 651, pages 449-460.
Crossref
Crossref
Crystopher Brito, Guillaume Reinhart, Henri Nguyen-Thi, Nathalie Mangelinck-Noël, Noé Cheung, José E. Spinelli & Amauri Garcia. (2015) High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al–Mg–Si alloy. Journal of Alloys and Compounds 636, pages 145-149.
Crossref
Crossref
R. Srinivasu, A. Sambasiva Rao, G. Madhusudhan Reddy & K. Srinivasa Rao. (2015) Friction stir surfacing of cast A356 aluminium–silicon alloy with boron carbide and molybdenum disulphide powders. Defence Technology 11:2, pages 140-146.
Crossref
Crossref
Iman El-Mahallawi, Ahmed Shash & Amer Amer. (2015) Nanoreinforced Cast Al-Si Alloys with Al2O3, TiO2 and ZrO2 Nanoparticles. Metals 5:2, pages 802-821.
Crossref
Crossref
P.R. Guru, F. Khan MD, S.K. Panigrahi & G.D. Janaki Ram. (2015) Enhancing strength, ductility and machinability of a Al–Si cast alloy by friction stir processing. Journal of Manufacturing Processes 18, pages 67-74.
Crossref
Crossref
Daniele Casari, Thomas H. Ludwig, Mattia Merlin, Lars Arnberg & Gian Luca Garagnani. (2014) Impact Behavior of A356 Foundry Alloys in the Presence of Trace Elements Ni and V. Journal of Materials Engineering and Performance 24:2, pages 894-908.
Crossref
Crossref
G. R. Cui, D. R. Ni, Z. Y. Ma & S. X. Li. (2014) Effects of Friction Stir Processing Parameters and In Situ Passes on Microstructure and Tensile Properties of Al-Si-Mg Casting. Metallurgical and Materials Transactions A 45:12, pages 5318-5331.
Crossref
Crossref
A. Bahmani, G. B. Eisaabadi, P. Davami, N. Varahram & M. O. Shabani. (2014) Effects of hydrogen level and cooling rate on ultimate tensile strength of Al A319 alloy. Russian Journal of Non-Ferrous Metals 55:4, pages 365-370.
Crossref
Crossref
Ping Chen, Li Hua Liang, Gong Luo & Jian Min Zeng. (2014) Relationship between Heat Treatments and Corrosion of Al-Si-Mg Casting Alloy. Advanced Materials Research 900, pages 96-99.
Crossref
Crossref
Xiang Fan & Yi Tao Yang. (2014) Research on the Microstructure and Properties of Hypereutectic Al-Si Alloy for Semi-Solid Forming during Heat Treatment. Advanced Materials Research 887-888, pages 349-356.
Crossref
Crossref
Mahmoud M. Tash & S. Alkahtani. (2013) Experimental Correlation for the Effect of Metallurgical Parameters on the Hardness of 356 and 319 Aluminum Alloys Using Minitab Software. Advanced Materials Research 716, pages 15-24.
Crossref
Crossref
You Bin Wang & Jian Min Zeng. (2013) The Effect of Aging on the Corrosion Property of Al-7Si-0.3Mg. Advanced Materials Research 652-654, pages 1124-1127.
Crossref
Crossref
Hsu-Chi Chuang, Truan-Sheng Lui & Li-Hui Chen. (2013) Characteristics and Effects of Particle Morphology and Tensile Ductility Resulting from FSP of Al–Si–Cu–Ni Casting and Forging Piston. MATERIALS TRANSACTIONS 54:8, pages 1373-1380.
Crossref
Crossref
Mohsen Ostad Shabani, Ali Mazahery, Mohammad Reza Rahimipour & Mansour Razavi. (2012) FEM and ANN investigation of A356 composites reinforced with B4C particulates. Journal of King Saud University - Engineering Sciences 24:2, pages 107-113.
Crossref
Crossref
M. O. SHABANI, M. ALIZADEH & A. MAZAHERY. (2011) Modelling of mechanical properties of cast A356 alloy. Fatigue & Fracture of Engineering Materials & Structures 34:12, pages 1035-1040.
Crossref
Crossref
Mohsen Ostad Shabani & Ali Mazahery. (2011) The ANN application in FEM modeling of mechanical properties of Al–Si alloy. Applied Mathematical Modelling 35:12, pages 5707-5713.
Crossref
Crossref
Mahmoud M. Tash, F.H SamuelSaleh Alkahtani. (2011) Machinability of Heat-Treated 356 and 319 Aluminum Alloys: Methodology for Data Processing and Calculation of Drilling Force and Moment. Advanced Materials Research 396-398, pages 1008-1022.
Crossref
Crossref
Mahmoud M. Tash & Saleh Alkahtani. (2011) Experimental Correlation between Metallurgical Parameters, Hardness and Machinability of 319 Al-Si-Cu-Mg Alloys. Advanced Materials Research 339, pages 462-476.
Crossref
Crossref
Hongwei Wang, Bao Li, Jinchuan Jie & Zunjie Wei. (2011) Influence of thermal rate treatment and low temperature pouring on microstructure and tensile properties of AlSi7Mg alloy. Materials & Design 32:5, pages 2992-2996.
Crossref
Crossref
Guiqing Wang, Liu Yan, Guocheng Ren & Zhongkui Zhao. (2010) Analyzing As-Cast Age Hardening of 356 Cast Alloy. Journal of Materials Engineering and Performance 20:3, pages 399-404.
Crossref
Crossref
Diana A. Lados, Diran Apelian & Libo Wang. (2010) Solution Treatment Effects on Microstructure and Mechanical Properties of Al-(1 to 13 pct)Si-Mg Cast Alloys. Metallurgical and Materials Transactions B 42:1, pages 171-180.
Crossref
Crossref
M. Shabani & A. Mazahery. (2011) Prediction of Mechanical Properties of Cast A356 Alloy as a Function of Microstructure and Cooling Rate. Archives of Metallurgy and Materials 56:3.
Crossref
Crossref
G. Madhusudhan Reddy & K. Srinivasa Rao. (2010) Enhancement of wear and corrosion resistance of cast A356 aluminium alloy using friction stir processing. Transactions of the Indian Institute of Metals 63:5, pages 793-798.
Crossref
Crossref
Saumyadeep Jana, Rajiv S. Mishra, John A. Baumann & Glenn J. Grant. (2010) Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy. Metallurgical and Materials Transactions A 41:10, pages 2507-2521.
Crossref
Crossref
D.K. Dwivedi. (2010) Adhesive wear behaviour of cast aluminium–silicon alloys: Overview. Materials & Design (1980-2015) 31:5, pages 2517-2531.
Crossref
Crossref
S. A. Kori, M. S. Prabhudev & T. M. Chandrashekharaiah. (2010) Studies on the microstructure and mechanical properties of A356 alloy with minor additions of copper and magnesium. Transactions of the Indian Institute of Metals 62:4-5, pages 353-356.
Crossref
Crossref
YINGCHUN CHEN & KAZUHIRO NAKATA. (2012) FRICTION STIR PROCESSING OF SKD61 TOOL STEEL. International Journal of Modern Physics B 23:06n07, pages 1116-1121.
Crossref
Crossref
Hans J. Roven, Manping Liu & Jens C. Werenskiold. (2008) Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy. Materials Science and Engineering: A 483-484, pages 54-58.
Crossref
Crossref
O. El Sebaie, A.M. Samuel, F.H. Samuel & H.W. Doty. (2008) The effects of mischmetal, cooling rate and heat treatment on the eutectic Si particle characteristics of A319.1, A356.2 and A413.1 Al–Si casting alloys. Materials Science and Engineering: A 480:1-2, pages 342-355.
Crossref
Crossref
Z.Y. Ma, A.L. Pilchak, M.C. Juhas & J.C. Williams. (2008) Microstructural refinement and property enhancement of cast light alloys via friction stir processing. Scripta Materialia 58:5, pages 361-366.
Crossref
Crossref
Z.Y. Ma. (2008) Friction Stir Processing Technology: A Review. Metallurgical and Materials Transactions A 39:3, pages 642-658.
Crossref
Crossref
Guiqing Wang, Qingzhou Sun, Li Shan, Zhongkui Zhao & Liu Yan. (2007) Influence of Indium Trace Addition on the Precipitation Behavior in a 357 Cast Aluminum Alloy. Journal of Materials Engineering and Performance 16:6, pages 752-756.
Crossref
Crossref
Gui Qing Wang, Zhong Kui Zhao & Yan Liu. (2007) Analyzing the Microstructure and Tensile Properties of an Al8Si0.35Mg Cast Alloy with Prolonged Aging. Key Engineering Materials 353-358, pages 353-356.
Crossref
Crossref
S.S. Sreeja Kumari, R.M. Pillai, T.P.D. Rajan & B.C. Pai. (2007) Effects of individual and combined additions of Be, Mn, Ca and Sr on the solidification behaviour, structure and mechanical properties of Al–7Si–0.3Mg–0.8Fe alloy. Materials Science and Engineering: A 460-461, pages 561-573.
Crossref
Crossref
Girish Kumar, Sathyapal Hegde & K. Narayan Prabhu. (2007) Heat transfer and solidification behaviour of modified A357 alloy. Journal of Materials Processing Technology 182:1-3, pages 152-156.
Crossref
Crossref
M. Tash, F.H. Samuel, F. Mucciardi & H.W. Doty. (2007) Effect of metallurgical parameters on the hardness and microstructural characterization of as-cast and heat-treated 356 and 319 aluminum alloys. Materials Science and Engineering: A 443:1-2, pages 185-201.
Crossref
Crossref
Rajesh Sharma, Anesh & D.K. Dwivedi. (2007) Solutionizing temperature and abrasive wear behaviour of cast Al–Si–Mg alloys. Materials & Design 28:6, pages 1975-1981.
Crossref
Crossref
Guiqing Wang, Qingzhou Sun, Liming Feng, Luo Hui & Cainian Jing. (2007) Influence of Cu content on ageing behavior of AlSiMgCu cast alloys. Materials & Design 28:3, pages 1001-1005.
Crossref
Crossref
Z. Y. Ma, S. R. Sharma & R. S. Mishra. (2006) Microstructural modification of as-cast Al-Si-Mg alloy by friction stir processing. Metallurgical and Materials Transactions A 37:11, pages 3323-3336.
Crossref
Crossref
Z.Y. Ma, S.R. Sharma & R.S. Mishra. (2006) Effect of friction stir processing on the microstructure of cast A356 aluminum. Materials Science and Engineering: A 433:1-2, pages 269-278.
Crossref
Crossref
Hyun You Kim, Sang Won Han & Hyuck Mo Lee. (2006) The influence of Mn and Cr on the tensile properties of A356–0.20Fe alloy. Materials Letters 60:15, pages 1880-1883.
Crossref
Crossref
Hyun You Kim, Tea Young Park, Sang Won Han & Hyuck Mo Lee. (2006) Effects of Mn on the crystal structure of α-Al(Mn,Fe)Si particles in A356 alloys. Journal of Crystal Growth 291:1, pages 207-211.
Crossref
Crossref
Rajesh Sharma, Anesh & D.K. Dwivedi. (2005) Influence of silicon (wt.%) and heat treatment on abrasive wear behaviour of cast Al–Si–Mg alloys. Materials Science and Engineering: A 408:1-2, pages 274-280.
Crossref
Crossref
Ching-Yi Yang, Sheng-Long Lee, Cheng-Kuo Lee & Jing-Chie Lin. (2005) Effects of Be and Fe on the mechanical and corrosion behaviors of A357 alloys. Materials Chemistry and Physics 93:2-3, pages 412-419.
Crossref
Crossref
R.S. Mishra & Z.Y. Ma. (2005) Friction stir welding and processing. Materials Science and Engineering: R: Reports 50:1-2, pages 1-78.
Crossref
Crossref
M.L. Santella, T. Engstrom, D. Storjohann & T.-Y. Pan. (2005) Effects of friction stir processing on mechanical properties of the cast aluminum alloys A319 and A356. Scripta Materialia 53:2, pages 201-206.
Crossref
Crossref
M. L. Santella, T. Engstrom, D. Storjohann & T. Pan. Effects of Friction Stir Processing on Mechanical Properties of the Cast Aluminum Alloy A356. Effects of Friction Stir Processing on Mechanical Properties of the Cast Aluminum Alloy A356.
S.G. Shabestari & H. Moemeni. (2004) Effect of copper and solidification conditions on the microstructure and mechanical properties of Al–Si–Mg alloys. Journal of Materials Processing Technology 153-154, pages 193-198.
Crossref
Crossref
R.X Li, R.D Li, Y.H Zhao, L.Z He, C.X Li, H.R Guan & Z.Q Hu. (2004) Age-hardening behavior of cast Al–Si base alloy. Materials Letters 58:15, pages 2096-2101.
Crossref
Crossref
Q. G. Wang, P. E. Jones & M. Osborne. Effect of Iron on the Microstructure and Mechanical Properties of an Al-7%Si-0.4%Mg Casting Alloy. Effect of Iron on the Microstructure and Mechanical Properties of an Al-7%Si-0.4%Mg Casting Alloy.
Min Ha Lee, Jae Joong Kim, Kyung Hoon Kim, Nack J. Kim, Sunghak Lee & Eui W. Lee. (2003) Effects of HIPping on high-cycle fatigue properties of investment cast A356 aluminum alloys. Materials Science and Engineering: A 340:1-2, pages 123-129.
Crossref
Crossref
J. An, C. Dong & Q.Y. Zhang. (2003) Improvement of the wear behavior of stircast Al–Si–Pb alloys by hot extrusion. Tribology International 36:1, pages 25-34.
Crossref
Crossref
P. K. Rohatgi, M. Gajdardziska-Josifovska, D. P. Robertson, J. K. Kim & R. Q. Guo. (2002) Age-hardening characteristics of aluminum alloy-hollow fly ash composites. Metallurgical and Materials Transactions A 33:5, pages 1541-1547.
Crossref
Crossref
L. Pedersen & L. Arnberg. (2001) The effect of solution heat treatment and quenching rates on mechanical properties and microstructures in AlSiMg foundry alloys. Metallurgical and Materials Transactions A 32:3, pages 525-532.
Crossref
Crossref
C. H. Caceres, C. J. Davidson, J. R. Griffiths & Q. G. Wang. (1999) The effect of Mg on the microstructure and mechanical behavior of Al-Si-Mg casting alloys. Metallurgical and Materials Transactions A 30:10, pages 2611-2618.
Crossref
Crossref
J. X. Dong, P. A. Karnezis, G. Durrant & B. Cantor. (1999) The effect of Sr and Fe additions on the microstructure and mechanical properties of a direct squeeze cast Al-7Si-0.3Mg alloy. Metallurgical and Materials Transactions A 30:5, pages 1341-1356.
Crossref
Crossref
S. Murali, Y. Arunkumar, P. V. J. Chetty, K. S. Raman & K. S. S. Murthy. (1997) The effect of preaging on the delayed aging of Al−7Si−0.3Mg. JOM 49:2, pages 29-33.
Crossref
Crossref
S. Murali, A. Trivedi, K. S. Shamanna & K. S. S. Murthy. (1996) Effect of iron and combined iron and beryllium additions on the fracture toughness and microstructures of squeeze-cast Al-7Si-0.3Mg alloy. Journal of Materials Engineering and Performance 5:4, pages 462-468.
Crossref
Crossref
S. Murali, K.S. Raman & K.S.S. Murthy. (1995) The formation of β-FeSiAl5 and BeFe phases in Al7Si0.3Mg alloy containing Be. Materials Science and Engineering: A 190:1-2, pages 165-172.
Crossref
Crossref