Citations (29)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
R. M'Saoubi & H. Chandrasekaran. (2004) Role of phase and grain size on chip formation and material work hardening during machining of single and dual phase steels. Ironmaking & Steelmaking 31:3, pages 258-264.
Read now
Read now
H. Yaguchi. (1989) Effect of soft additives (Pb/Bi) on machinability of low carbon resulphurised free machining steels. Materials Science and Technology 5:3, pages 255-267.
Read now
Read now
Y. Matsumoto, M. M. Barash & C. R. Liu. (1987) Cutting mechanism during machining of hardened steel. Materials Science and Technology 3:4, pages 299-305.
Read now
Read now
A. Wolfenden & P. K. Wright. (1979) Role of lead in free-machining brass. Metals Technology 6:1, pages 297-302.
Read now
Read now
Articles from other publishers (25)
Kambuyi Katuku. (2022) Regime features of austempered ductile iron cutting. Journal of Manufacturing Processes 83, pages 374-386.
Crossref
Crossref
Rachit Ranjan, Ravi Shankar Rai & Vivek Bajpai. 2021. Advanced Machining and Finishing. Advanced Machining and Finishing
253
286
.
Fengzhen Sun & E. Kristofer Gamstedt. (2019) Experimental and numerical investigation on shear banding during nanomachining of an amorphous glassy polymer. International Journal of Mechanical Sciences 151, pages 13-21.
Crossref
Crossref
Kambuyi Katuku. (2018) Substructure of deformation zones in austempered ductile iron finish-turning chips. Journal of Materials Processing Technology 262, pages 511-520.
Crossref
Crossref
I.S. Jawahir. 2016. Encyclopedia of Iron, Steel, and Their Alloys. Encyclopedia of Iron, Steel, and Their Alloys
2004
2036
.
Yun Chen, Huaizhong Li & Jun Wang. (2014) Analytical modelling of cutting forces in near-orthogonal cutting of titanium alloy Ti6Al4V. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 229:6, pages 1122-1133.
Crossref
Crossref
Ana Isabel Fernández-Abia, Joaquín Barreiro García & Luis N. López de Lacalle. 2013. Machining and machine-tools. Machining and machine-tools
29
90
.
J. Pujana, P.J. Arrazola, R. M’Saoubi & H. Chandrasekaran. (2007) Analysis of the inverse identification of constitutive equations applied in orthogonal cutting process. International Journal of Machine Tools and Manufacture 47:14, pages 2153-2161.
Crossref
Crossref
R. M'Saoubi & L. Ryde. (2005) Application of the EBSD technique for the characterisation of deformation zones in metal cutting. Materials Science and Engineering: A 405:1-2, pages 339-349.
Crossref
Crossref
Edward M. Trent & Paul K. Wright. 2000. Metal Cutting. Metal Cutting
339
369
.
B. K. Ganapathy & I. S. Jawahir. (1998) Modeling the Chip-Work Contact Force for Chip Breaking in Orthogonal Machining With a Flat-Faced Tool. Journal of Manufacturing Science and Engineering 120:1, pages 49-56.
Crossref
Crossref
Laizhu Jiang, Åke Roos & Ping Liu. (1997) The influence of austenite grain size and its distribution on chip deformation and tool life during machining of AISI 304L. Metallurgical and Materials Transactions A 28:11, pages 2415-2422.
Crossref
Crossref
Laizhu Jiang, Hannu HÄnninen, Jukka Paro & Veijo Kauppinen. (1996) Active wear and failure mechanisms of TiN-Coated high speed steel and tin-coated cemented carbide tools when machining powder metallurgically made stainless steels. Metallurgical and Materials Transactions A 27:9, pages 2796-2808.
Crossref
Crossref
R. Sowerby & N. Chandrasekaran. (1989) A proposal for the onset of chip segmentation in machining. Materials Science and Engineering: A 119, pages 219-229.
Crossref
Crossref
J.A. Yeomans & T.F. Page. (1989) The chemical stability of ceramic cutting tool materials exposed to liquid metals. Wear 131:1, pages 163-175.
Crossref
Crossref
T. Smith, Y. Naerheim & M.S. Lan. (1988) Theoretical analysis of cutting fluid interaction in machining. Tribology International 21:5, pages 239-247.
Crossref
Crossref
C.A. Brown. (1987) Strain analysis in machining using metallographic methods. Metallography 20:4, pages 465-483.
Crossref
Crossref
B M Manyindo & P L B Oxley. (2016) Modelling the Catastrophic Shear Type of Chip When Machining Stainless Steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 200:5, pages 349-358.
Crossref
Crossref
Staffan Söderberg & Sture Hogmark. (1986) Wear mechanisms and tool life of high speed steels related to microstructure. Wear 110:3-4, pages 315-329.
Crossref
Crossref
Ulf Bryggman & Staffan Söderberg. (1986) Contact conditions in fretting. Wear 110:1, pages 1-17.
Crossref
Crossref
Staffan Söderberg, Ulf Bryggman & Alfredo Canales. (1985) Influence of precipitation and solution strengthening on abrasive wear resistance. Wear 105:1, pages 1-17.
Crossref
Crossref
S. Söderberg, L. Åhman & M. Svenzon. (1983) A metallurgical study of the wear of band-saw blades. Wear 85:1, pages 11-27.
Crossref
Crossref
P.K. Wright & A. Thangaraj. (1982) Correlation of tool wear mechanisms with new slipline fields for cutting. Wear 75:1, pages 105-122.
Crossref
Crossref
R. Komanduri & B.F. Von Turkovich. (1981) New observations on the mechanism of chip formation when machining titanium alloys. Wear 69:2, pages 179-188.
Crossref
Crossref
S. M. De Almeida & B. K. Hinds. 1981. Proceedings of the Twenty-First International Machine Tool Design and Research Conference. Proceedings of the Twenty-First International Machine Tool Design and Research Conference
289
296
.