Citations (94)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (14)
Marcello Cabibbo, Chiara de Crescenzo, Roberto Montanari, Maria Richetta & Alessandra Varone. (2023) Direct monitoring of porosity evolution by dynamic modulus measurements: Three case studies. European Journal of Materials 3:1.
Read now
Read now
G. Mantegna, C. R. Vindigni, S. Valvano, A. Esposito, D. Tumino, A. Alaimo & C. Orlando. (2023) Representative volume element homogenisation approach to characterise additively manufactured porous metals. Mechanics of Advanced Materials and Structures 30:5, pages 1073-1082.
Read now
Read now
Daniel Toledo dos Santos, Mario Zadra, Luca Girardini, Pietro Albonetti, Stefano Bordin & Alberto Molinari. (2020) Influence of die wall lubrication on tensile properties of high temperature sintered and sinterhardened low alloy steel. Powder Metallurgy 63:4, pages 268-276.
Read now
Read now
G. Portal, E. Euvrard, P. Tailhades & A. Rousset. (1999) Relationship between compacting pressure, green density, and green strength of powder compacts used in thermal batteries. Powder Metallurgy 42:1, pages 34-40.
Read now
Read now
Y. F. Lin, T. S. Lui & L. H. Chen. (1996) The effect of graphite shape on the tensile deformation behaviour in hot-swaged and hot-rolled ferritic spheroidal graphite cast iron. International Journal of Cast Metals Research 9:2, pages 63-69.
Read now
Read now
J. A. Lund. (1984) The Flow and Fracture Behaviour of Sintered Iron. Canadian Metallurgical Quarterly 23:1, pages 131-137.
Read now
Read now
K.-S. Churn & D. N. Yoon. (1979) Pore Formation and Its Effect on Mechanical Properties in W—Ni—Fe Heavy Alloy. Powder Metallurgy 22:4, pages 175-178.
Read now
Read now
M. Nakamura & K. Tsuya. (1979) Strength and Elongation of Sintered Iron. Powder Metallurgy 22:3, pages 101-108.
Read now
Read now
H. Dixon, A. J. Fletcher & R. T. Cundill. (1978) Relationship Between Degree of Homogeneity and Physical and Mechanical Properties of a Sintered Nickel Steel. Powder Metallurgy 21:3, pages 131-142.
Read now
Read now
W. J. Huppmann & M. Hirschvogel. (1978) Powder forging. International Metals Reviews 23:1, pages 209-239.
Read now
Read now
R. Haynes. (1977) A Study of the Effect of Porosity Content on the Ductility of Sintered Metals. Powder Metallurgy 20:1, pages 17-20.
Read now
Read now
H. F. FISCHMEISTER, B. ARÉN & K. E. EASTERLING. (1971) DEFORMATION AND DENSIFICATION OF POROUS PREFORMS IN HOT FORGING. Powder Metallurgy 14:27, pages 144-163.
Read now
Read now
ALAN MILNER. (1968) TENSILE EVALUATION OF UNWORKED TUNGSTEN-25% RHENIUM ALLOYS CONSOLIDATED BY SINTERING ELEMENTAL POWDERS. Powder Metallurgy 11:21, pages 56-62.
Read now
Read now
I. L. Mogford. (1967) The deformation and fracture of two-phase materials. Metallurgical Reviews 12:1, pages 49-68.
Read now
Read now
Articles from other publishers (80)
Fatih Yılmaz, Ercan Gürses & Melin Şahin. (2023) Determination of the elastoplastic properties of Ti-6Al-4V alloy manufactured by electron beam melting. Rapid Prototyping Journal 29:10, pages 2149-2163.
Crossref
Crossref
Navya Kota, Prasanta Jana & Siddhartha Roy. (2023) Elastic properties of porous silicon nitride fabricated via a low-temperature processing route. Ceramics International 49:4, pages 7066-7079.
Crossref
Crossref
Jun Zhang, Xin Zhao, Bing Yang, Jingyu Li, Yan Liu, Guanbing Ma, Shuxian Yuan & Jinfeng Wu. (2022) Nondestructive evaluation of porosity in additive manufacturing by laser ultrasonic surface wave. Measurement 193, pages 110944.
Crossref
Crossref
Prasanta Jana, Sumit Ray, Diya Goldar, Navya Kota, Sujoy Kumar Kar & Siddhartha Roy. (2022) Study of the elastic properties of porous copper fabricated via the lost carbonate sintering process. Materials Science and Engineering: A 836, pages 142713.
Crossref
Crossref
Gökhan UMAROĞULLARI & Semiha KARTAL. (2021) A Model Proposal on Results of Physical and Mechanical Properties of Trakia Region Küfeki Stone Used at Early Period Ottoman Buildings. Mimarlık Bilimleri ve Uygulamaları Dergisi (MBUD), pages 384-395.
Crossref
Crossref
Philip R. Barnett, Stephen A. Young, Neel J. Patel & Dayakar Penumadu. (2021) Prediction of strength and modulus of discontinuous carbon fiber composites considering stochastic microstructure. Composites Science and Technology 211, pages 108857.
Crossref
Crossref
Chanun Suwanpreecha, Phanuphak Seensattayawong, Vorawat Vadhanakovint & Anchalee Manonukul. (2021) Influence of Specimen Layout on 17-4PH (AISI 630) Alloys Fabricated by Low-Cost Additive Manufacturing. Metallurgical and Materials Transactions A 52:5, pages 1999-2009.
Crossref
Crossref
Fátima Ternero, Luís Guerra Rosa, Petr Urban, Juan Manuel Montes & Francisco G. Cuevas. (2021) Influence of the Total Porosity on the Properties of Sintered Materials—A Review. Metals 11:5, pages 730.
Crossref
Crossref
Z. Al-Nabulsi, J.T. Mottram, M. Gillie, N. Kourra & M.A. Williams. (2021) Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications. Construction and Building Materials 274, pages 121700.
Crossref
Crossref
Samuel Tesfaye Mekonone, Alberto Molinari & Solomon Mesfin Demlie. 2021. Advances of Science and Technology. Advances of Science and Technology
245
260
.
Maria Richetta & Alessandra Varone. (2020) A Focus on Dynamic Modulus: Effects of External and Internal Morphological Features. Metals 11:1, pages 40.
Crossref
Crossref
Saeed Z. Chavoshi, Vito L. Tagarielli, Zhusheng Shi, Jianguo Lin, Shuyun Wang, Jiaying Jiang, John P. Dear & Kamran Nikbin. (2020) Predictions of the Mechanical Response of Sintered FGH96 Powder Compacts. Journal of Engineering Materials and Technology 142:2.
Crossref
Crossref
Sandra M. Castillo, Sergio Muñoz, Paloma Trueba, Eduardo Díaz & Yadir Torres. (2019) Influence of the Compaction Pressure and Sintering Temperature on the Mechanical Properties of Porous Titanium for Biomedical Applications. Metals 9:12, pages 1249.
Crossref
Crossref
Da Seul Shin, Suk Hyun Kim, Joo Won Oh, Im Doo Jung, Woo Seok Yang, Chi Hun Lee, Hyeok Joon Kwon, Jin Mo Koo & Seong Jin Park. (2019) Correlation Study Between Material Parameters and Mechanical Properties of Iron–Carbon Compacts Using Sensitivity Analysis and Regression Model. Metals and Materials International 25:5, pages 1258-1271.
Crossref
Crossref
Sheila Lascano, Cristina Arévalo, Isabel Montealegre-Melendez, Sergio Muñoz, José Rodriguez-Ortiz, Paloma Trueba & Yadir Torres. (2019) Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique. Applied Sciences 9:5, pages 982.
Crossref
Crossref
Jason L. Schulthess, Wilson R. Lloyd, Barry Rabin, Katelyn Wheeler & Thomas W. Walters. (2019) Mechanical properties of irradiated U Mo alloy fuel. Journal of Nuclear Materials 515, pages 91-106.
Crossref
Crossref
Yukitaka Murakami. 2019. Metal Fatigue. Metal Fatigue
239
267
.
Carmen Torres-Sanchez, John McLaughlin & Ross Bonallo. (2018) Effect of Pore Size, Morphology and Orientation on the Bulk Stiffness of a Porous Ti35Nb4Sn Alloy. Journal of Materials Engineering and Performance 27:6, pages 2899-2909.
Crossref
Crossref
Yachao Wang, Jing Shi, Shiqiang Lu & Weihan Xiao. (2018) Investigation of Porosity and Mechanical Properties of Graphene Nanoplatelets-Reinforced AlSi10 Mg by Selective Laser Melting. Journal of Micro and Nano-Manufacturing 6:1.
Crossref
Crossref
M. Masmoudi, W. Kaddouri, T. Kanit, S. Madani, S. Ramtani & A. Imad. (2017) Modeling of the effect of the void shape on effective ultimate tensile strength of porous materials: Numerical homogenization versus experimental results. International Journal of Mechanical Sciences 130, pages 497-507.
Crossref
Crossref
Margaux Gilmas, Jerôme Chottin, Mark J. Dougan & Eric Hug. (2016) Evolution of damage and fracture in two families of Ni–Cu–Mo sinter-hardened steels with various initial porosities. Materials Science and Engineering: A 654, pages 85-93.
Crossref
Crossref
Garth Hastings, Ishbel Gair & D. Daily. 2016. Handbook of Biomaterial Properties. Handbook of Biomaterial Properties
353
445
.
Li Zaijiu, Yang Tianwu, Jin Qinglin, Jiang Yehua & Zhou Rong. (2014) Influence of Structural Parameters on Tensile Property of Gasar Porous Copper. Rare Metal Materials and Engineering 43:11, pages 2609-2613.
Crossref
Crossref
Ibrahim Metin?z, I. Cristofolini, W. Pahl, A. DeNicolo, P. Marconi & A. Molinari. (2014) Theoretical and experimental study of the contact fatigue behavior of a Mo?Cu steel produced by powder metallurgy. Materials Science and Engineering: A 614, pages 81-87.
Crossref
Crossref
Giulia Cipolloni, Cinzia Menapace, Ilaria Cristofolini & Alberto Molinari. (2014) A quantitative characterisation of porosity in a Cr?Mo sintered steel using image analysis. Materials Characterization 94, pages 58-68.
Crossref
Crossref
Yadir Torres, Sheila Lascano, Jorge Bris, Juan Pavón & José A. Rodriguez. (2014) Development of porous titanium for biomedical applications: A comparison between loose sintering and space-holder techniques. Materials Science and Engineering: C 37, pages 148-155.
Crossref
Crossref
J. A. Choren, S. M. Heinrich & M. B. Silver-Thorn. (2013) Young’s modulus and volume porosity relationships for additive manufacturing applications. Journal of Materials Science 48:15, pages 5103-5112.
Crossref
Crossref
Hideo NakajimaHideo Nakajima & Hideo Nakajima. 2013. Porous Metals with Directional Pores. Porous Metals with Directional Pores
127
181
.
J.L. Stewart, L. Jiang, J.J. Williams & N. Chawla. (2012) Prediction of bulk tensile behavior of dual phase stainless steels using constituent behavior from micropillar compression experiments. Materials Science and Engineering: A 534, pages 220-227.
Crossref
Crossref
Sawao Honda, Yuuki Ogihara, Shinobu Hashimoto & Yuji Iwamoto. 2010. Advances in Bioceramics and Porous Ceramics III. Advances in Bioceramics and Porous Ceramics III
127
137
.
Katerina E. Aifantis & Avraam A. Konstantinidis. (2009) Hall–Petch revisited at the nanoscale. Materials Science and Engineering: B 163:3, pages 139-144.
Crossref
Crossref
Sawao HONDA, Yuuki OGIHARA, Tsunego KISHI, Shinobu HASHIMOTO & Yuji IWAMOTO. (2009) Estimation of thermal shock resistance of fine porous alumina by infrared radiation heating method. Journal of the Ceramic Society of Japan 117:1371, pages 1208-1215.
Crossref
Crossref
Karel Schulmann, Jean-Emmanuel Martelat, Stanislav Ulrich, Ondrej Lexa, Pavla ?t?psk?Jens K. Becker. (2008) Evolution of microstructure and melt topology in partially molten granitic mylonite: Implications for rheology of felsic middle crust. Journal of Geophysical Research 113:B10.
Crossref
Crossref
B. Vamsi Krishna, Susmita Bose & Amit Bandyopadhyay. (2007) Low stiffness porous Ti structures for load-bearing implants. Acta Biomaterialia 3:6, pages 997-1006.
Crossref
Crossref
Laurent Corté & Ludwik Leibler. (2007) A Model for Toughening of Semicrystalline Polymers. Macromolecules 40:15, pages 5606-5611.
Crossref
Crossref
Hwan Jin Sung, Tae Kwon Ha, Sang Ho Ahn & Young Won Chang. (2007) An Investigation on Elongation-Porosity Relation in Sintered 17-4 PH Stainless Steel. Materials Science Forum 534-536, pages 645-648.
Crossref
Crossref
Yoshi-Taka Takeda & Albert Griera. (2006) Rheological and kinematical responses to flow of two-phase rocks. Tectonophysics 427:1-4, pages 95-113.
Crossref
Crossref
Shaocheng Ji, Qi Gu & Bin Xia. (2006) Porosity dependence of mechanical properties of solid materials. Journal of Materials Science 41:6, pages 1757-1768.
Crossref
Crossref
Chengfeng Li & Zhengang Zhu. (2006) Dynamic Young's modulus of open-porosity titanium measured by the electromagnetic acoustic resonance method. Journal of Porous Materials 13:1, pages 21-26.
Crossref
Crossref
O Yeheskel. (2004) Nondestructive Evaluation of the Dynamic Elastic Moduli of Porous Iron Compacts. Journal of Testing and Evaluation 32:1, pages 11269.
Crossref
Crossref
. 2004. Molecular Adhesion and Its Applications. Molecular Adhesion and Its Applications
245
274
.
Ik-Hyun Oh, Naoyuki Nomura, Naoya Masahashi & Shuji Hanada. (2003) Mechanical properties of porous titanium compacts prepared by powder sintering. Scripta Materialia 49:12, pages 1197-1202.
Crossref
Crossref
G Straffelini & A Molinari. (2002) Evolution of tensile damage in porous iron. Materials Science and Engineering: A 334:1-2, pages 96-103.
Crossref
Crossref
S.K Hyun, K Murakami & H Nakajima. (2001) Anisotropic mechanical properties of porous copper fabricated by unidirectional solidification. Materials Science and Engineering: A 299:1-2, pages 241-248.
Crossref
Crossref
Eugene A. Olevsky, Gregory A. Shoales & Randall M. German. (2001) Temperature effect on strength evolution under sintering. Materials Research Bulletin 36:3-4, pages 449-459.
Crossref
Crossref
Zdeněk Venera, Karel Schulmann & Alfred Kröner. (2000) Intrusion within a transtensional tectonic domain: the Čistá granodiorite (Bohemian Massif)—structure and rheological modelling. Journal of Structural Geology 22:10, pages 1437-1454.
Crossref
Crossref
Jean-Emmanuel Martelat, Karel Schulmann, Jean-Marc Lardeaux, Christian Nicollet & Hervé Cardon. (1999) Granulite microfabrics and deformation mechanisms in southern Madagascar. Journal of Structural Geology 21:6, pages 671-687.
Crossref
Crossref
G. Straffelini, V. Fontanari & A. Molinari. (1999) True and apparent Young’s modulus in ferrous porous alloys. Materials Science and Engineering: A 260:1-2, pages 197-202.
Crossref
Crossref
R. W. Rice. (1996) Comparison of physical property-porosity behaviour with minimum solid area models. Journal of Materials Science 31:6, pages 1509-1528.
Crossref
Crossref
R. W. Rice. (1996) Evaluation and extension of physical property-porosity models based on minimum solid area. Journal of Materials Science 31:1, pages 102-118.
Crossref
Crossref
Y. F. Lin, T. S. Lui & L. H. Chen. (1995) Study on the relationship between intermediate-temperature embrittlement and triaxial stress induced by the ellipsoidal graphite in hot-rolled ferritic spheroidal graphite cast iron. Metallurgical and Materials Transactions A 26:5, pages 1101-1106.
Crossref
Crossref
R. W. Rice. (1993) Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations. Journal of Materials Science 28:8, pages 2187-2190.
Crossref
Crossref
Y. Imaida, M. Takagawa, T. Kirimura, K. Hirota, O. Yamaguchi, A. Kakitsuji & H. Miyamoto. (1992) Hot isostatic pressing of sendust metal powders. Materials Research Bulletin 27:6, pages 661-668.
Crossref
Crossref
Bradley R. Hacker & John M. Christie. (1991) Experimental deformation of a glassy basalt. Tectonophysics 200:1-3, pages 79-96.
Crossref
Crossref
Stéphane Roux & Dominique François. (1991) A simple model for ductile fracture of porous materials. Scripta Metallurgica et Materialia 25:5, pages 1087-1092.
Crossref
Crossref
Yu. V. Mil'man, R. K. Ivashchenko & N. P. Zakharova. (1991) Mechanical properties of sintered materials. II. Effect of porosity on the ductility of sintered alloys. Soviet Powder Metallurgy and Metal Ceramics 30:3, pages 250-256.
Crossref
Crossref
R. Haynes. (1991) Effects of porosity on the tensile strengths of sintered irons. Metal Powder Report 46:2, pages 49-51.
Crossref
Crossref
Yu. V. Mil'man. (1991) The mechanical properties of sintered materials. I. The strength properties of sintered materials. Soviet Powder Metallurgy and Metal Ceramics 30:1, pages 30-39.
Crossref
Crossref
D.A. Gerard & D.A. Koss. (1990) Porosity and crack initiation during low cycle fatigue. Materials Science and Engineering: A 129:1, pages 77-85.
Crossref
Crossref
Mark R. Handy. (2012) The solid‐state flow of polymineralic rocks. Journal of Geophysical Research: Solid Earth 95:B6, pages 8647-8661.
Crossref
Crossref
O. I. Ban'kovskii, V. F. Moiseev, É. P. Pechkovskii & N. I. Shcherban'. (1988) Geometrical and grain boundary softening of porous iron. Soviet Powder Metallurgy and Metal Ceramics 27:6, pages 493-497.
Crossref
Crossref
W.A. Spitzig, R.E. Smelser & O. Richmond. (1988) The evolution of damage and fracture in iron compacts with various initial porosities. Acta Metallurgica 36:5, pages 1201-1211.
Crossref
Crossref
Peter Jordan. (1988) The rheology of polymineralic rocks — an approach. Geologische Rundschau 77:1, pages 285-294.
Crossref
Crossref
R.J. Bourcier, D.A. Koss, R.E. Smelser & O. Richmond. (1986) The influence of porosity on the deformation and fracture of alloys. Acta Metallurgica 34:12, pages 2443-2453.
Crossref
Crossref
F. Danusso & G. Tieghi. (1986) Strength versus composition of rigid matrix particulate composites. Polymer 27:9, pages 1385-1390.
Crossref
Crossref
P. E. Magnusen, P. S. Follansbee & D. A. Koss. (1985) The influence of strain rate and porosity on the deformation and fracture of titanium and nickel. Metallurgical Transactions A 16:12, pages 2273-2281.
Crossref
Crossref
Thomas M. Tharp. (1983) Analogies between the high-temperature deformation of polyphase rocks and the mechanical behavior of porous powder metal. Tectonophysics 96:3-4, pages T1-T11.
Crossref
Crossref
G J Pitt & J C V Rumsey. (1980) Some features of the structure of metallurgical cokes and their effects on strength. Journal of Physics D: Applied Physics 13:6, pages 969-981.
Crossref
Crossref
J W Patrick, M J Sims & A E Stacey. (1980) The relation between the strength and structure of metallurgical coke. Journal of Physics D: Applied Physics 13:6, pages 937-951.
Crossref
Crossref
ROY W. RICE. 1977. Properties and Microstructure. Properties and Microstructure
199
381
.
J.K. Wright. (1976) The effect of firing conditions on the Strength of Hematite compacts. Powder Technology 14:1, pages 103-113.
Crossref
Crossref
S. C. CARNIGLIA. (1972) Working Model for Porosity Effects on the Uniaxial Strength of Ceramics. Journal of the American Ceramic Society 55:12, pages 610-618.
Crossref
Crossref
B. R. Butcher. (1972) Transverse tensile properties of an unbonded model composite. Journal of Materials Science 7:8, pages 877-887.
Crossref
Crossref
B.R. Butcher. (1971) A macroscopic simulation of ductile tensile cracking. Engineering Fracture Mechanics 3:3, pages 191-204.
Crossref
Crossref
Andrew F. Kravic. Effect of Porosity on the Mechanical Properties of Sintered Nickel Steels. Effect of Porosity on the Mechanical Properties of Sintered Nickel Steels.
I. M. Storozhevskii. (1968) Variation of tensile, shearing, bending, and torsional strength with the porosity of metal-ceramic materials. Soviet Powder Metallurgy and Metal Ceramics 7:9, pages 727-731.
Crossref
Crossref
I. M. Storozhevskii. (1968) Some problems of modeling a porous body. Soviet Powder Metallurgy and Metal Ceramics 7:5, pages 409-413.
Crossref
Crossref
H.E.H. Stone & N.A. Lockington. (1967) The hardness/porosity relationship in chromic oxide cermets. Materials Science and Engineering 2:1, pages 21-24.
Crossref
Crossref
I. M. Storozhevskii. (1965) Modeling of a porous body and determination of relative cross-sectional weakening by pores. Soviet Powder Metallurgy and Metal Ceramics 4:11, pages 927-932.
Crossref
Crossref
M. Eudier. Mechanical Parts Made by Powder Metallurgy in France. Mechanical Parts Made by Powder Metallurgy in France.