Naoki OyaTatsuya SatoDaichi Yamaguchi. (2023) <i>In Situ</i> Scanning Electron Microscopy Observation of Sintering Process of Aluminum Alloy. MATERIALS TRANSACTIONS 64:8, pages 1946-1951.
Crossref
Aniruddha Malakar, Vivek Pancholi & K. S. Suresh. (2023) Grain Boundary and Texture Evolution during Severe Plastic Deformation of Green Al Powder Compacts. Journal of Materials Engineering and Performance.
Crossref
Raquel de Oro Calderon, Christian Gierl-Mayer & Herbert Danninger. (2022) Thermoanalytical techniques for characterizing sintering processes in ferrous powder metallurgy. Journal of Thermal Analysis and Calorimetry 148:4, pages 1309-1320.
Crossref
Raquel de Oro Calderon, Christian Gierl-Mayer & Herbert Danninger. 2022. Encyclopedia of Materials: Metals and Alloys. Encyclopedia of Materials: Metals and Alloys
481
492
.
Naoki OYATatsuya SATODaichi YAMAGUCHI. (2021) In Situ Scanning Electron Microscopy Observation of Sintering Process of Aluminum Alloy走査電子顕微鏡によるアルミニウム合金の焼結過程のその場観察. Journal of the Japan Society of Powder and Powder Metallurgy 68:8, pages 311-316.
Crossref
Jan Kazior, Tadeusz Pieczonka & Mateusz Laska. (2021) The Effect of Nitrogen Linear Flow on Lubricant Removal and Sintering Densification of Alumix 431D Grade Powder. Metals 11:8, pages 1259.
Crossref
Olivier Sioui-Latulippe, Philippe Beaulieu, Mathieu Boisvert, Jean-Philippe Masse, Denis Christopherson & Gilles L’Espérance. (2021) The Characterization of a Gas-Atomized Ferritic Steel Powder Pre-alloyed with 6 Wt Pct Aluminum. Metallurgical and Materials Transactions A 52:7, pages 3051-3063.
Crossref
Ayşe Nur Acar, Rasiha Nefise Mutlu, Doğan Kaya, Abdul Kadir Ekşi & Ahmet Ekicibil. (2021) Fe addition influence on the mechanical and thermophysical behaviours of PM Alumix 431 alloy. Journal of Molecular Structure 1232, pages 130031.
Crossref
Mehmet Ayvaz & Hakan Cetinel. (2021)
Mechanical properties of Al-Cu/B
4
C and Al-Mg/B
4
C metal matrix composites
. Materials Testing 63:4, pages 350-355.
Crossref
Burak GÜL, Levent Ulvi GEZİCİ, Mehmet AYVAZ & Uğur ÇAVDAR. (2020) The comparative study of conventional and ultra-high frequency induction sintering behavior of pure aluminum. International Advanced Researches and Engineering Journal 4:3, pages 173-179.
Crossref
Xinyang Du, Rutie Liu, Xiang Xiong & Hongwei Liu. (2020) Effects of sintering time on the microstructure and properties of an Al-Cu-Mg alloy. Journal of Materials Research and Technology 9:5, pages 9657-9666.
Crossref
A. Malakar, V. Pancholi & V. V. Dabhade. (2020) Recrystallization and Strengthening Mechanism in Friction-Stir-Processed Al Powder Compacts. Journal of Materials Engineering and Performance 29:5, pages 3243-3252.
Crossref
Qiaoli Lin, Fuxiang Li, Peng Jin & Weiqiang Zhong. (2018) Wetting of T2 Cu by molten 4043 and 6061 Al alloys at 923–1023 K. Journal of Alloys and Compounds 734, pages 144-151.
Crossref
Herbert Danninger, Raquel de Oro Calderon & Christian Gierl‐Mayer. 2003. Ullmann's Encyclopedia of Industrial Chemistry. Ullmann's Encyclopedia of Industrial Chemistry
1
57
.
A. GökçeF. Findik & A. O. Kurt. (2017) Effects of Sintering Temperature and Time on the Properties of Al-Cu PM Alloy. Practical Metallography 54:8, pages 533-551.
Crossref
Mohamed N. Rahaman. 2015. Powder Metallurgy. Powder Metallurgy
205
236
.
Min Chul OH & Byungmin AHN. (2014) Effect of Mg composition on sintering behaviors and mechanical properties of Al–Cu–Mg alloy. Transactions of Nonferrous Metals Society of China 24, pages s53-s58.
Crossref
Tadeusz Pieczonka & Jan Kazior. (2013) Microstructure Evolution during Sintering of Aluminium in Nitrogen. Advanced Materials Research 811, pages 64-71.
Crossref
M.F. Moreno & C.J.R. González Oliver. (2013) Liquid phase densification of Al-4.5wt.% Cu powder reinforced with 5wt.% Saffil short fibers during hot pressing. Powder Technology 245, pages 13-20.
Crossref
H. Danninger, C. Gierl-mayer & S. Strobl. 2013. Advances in Powder Metallurgy. Advances in Powder Metallurgy
308
357
.
Q. Zhang, B.L. Xiao, P. Xue & Z.Y. Ma. (2012) Microstructural evolution and mechanical properties of ultrafine grained Al3Ti/Al–5.5Cu composites produced via hot pressing and subsequent friction stir processing. Materials Chemistry and Physics 134:1, pages 294-301.
Crossref
C. Padmavathi, A. Upadhyaya & D. Agrawal. (2011) Effect of microwave and conventional heating on sintering behavior and properties of Al–Mg–Si–Cu alloy. Materials Chemistry and Physics 130:1-2, pages 449-457.
Crossref
C. Padmavathi & Anish Upadhyaya. (2011) Sintering Behaviour and Mechanical Properties of Al–Cu–Mg–Si–Sn Aluminum Alloy. Transactions of the Indian Institute of Metals 64:4-5, pages 345-357.
Crossref
S.H. Huo, M. Qian, G.B. Schaffer & E. Crossin. 2011. Fundamentals of Aluminium Metallurgy. Fundamentals of Aluminium Metallurgy
655
701
.
I. Arribas, J.M. Martín & F. Castro. (2010) The initial stage of liquid phase sintering for an Al–14Si–2.5Cu–0.5Mg (wt%) P/M alloy. Materials Science and Engineering: A 527:16-17, pages 3949-3966.
Crossref
Leopold Kniewallner, Herbert Danninger & Bruno Buchmayr. 2009. Leichtbau. Leichtbau
173
245
.
C. Zubizarreta, S. Giménez, J.M. Martín & I. Iturriza. (2009) Effect of the heat treatment prior to extrusion on the direct hot-extrusion of aluminium powder compacts. Journal of Alloys and Compounds 467:1-2, pages 191-201.
Crossref
T. Pieczonka, Th. Schubert, S. Baunack & B. Kieback. (2008) Dimensional behaviour of aluminium sintered in different atmospheres. Materials Science and Engineering: A 478:1-2, pages 251-256.
Crossref
F Tang, I.E Anderson & S.B Biner. (2002) Solid state sintering and consolidation of Al powders and Al matrix composites. Journal of Light Metals 2:4, pages 201-214.
Crossref
Guoqiang Xie, Osamu Ohashi, Norio Yamaguchi, Minghui Song, Kazuo Furuya & Tetsuji Noda. (2002) TEM Observation of Interfaces between Particles in Al-Mg Alloy Powder Compacts Prepared by Pulse Electric Current Sintering. MATERIALS TRANSACTIONS 43:9, pages 2177-2180.
Crossref
G.B Schaffer, T.B Sercombe & R.N Lumley. (2001) Liquid phase sintering of aluminium alloys. Materials Chemistry and Physics 67:1-3, pages 85-91.
Crossref
R. N. Lumley, T. B. Sercombe & G. M. Schaffer. (1999) Surface oxide and the role of magnesium during the sintering of aluminum. Metallurgical and Materials Transactions A 30:2, pages 457-463.
Crossref
Akira Nakajima & Gary L. Messing. (2005) Liquid‐Phase Sintering of Alumina Coated with Magnesium Aluminosilicate Glass. Journal of the American Ceramic Society 81:5, pages 1163-1172.
Crossref
Masayoshi OZAWA, Kouei YOSHIHARA, Tadashi MOMONO & Hiroshi G. KATAYAMA. (1997) Production of Al2O3 particle/Al-4.5%Cu alloy composite by transient liquid phase sintering process.. Journal of Japan Institute of Light Metals 47:9, pages 481-486.
Crossref
G. Jangg, H. Danninger, K. Schröder, K. Abhari, H.‐C. Neubing & J. Seyrkammer. (2004) PM Aluminum Camshaft Belt Pulleys for Automotive Engines. Materialwissenschaft und Werkstofftechnik 27:4, pages 179-189.
Crossref
Masayoshi OZAWA, Hiroshi KIMURA, Tadashi MOMONO & Hiroshi G. KATAYAMA. (1996) Production of Al-4.5mass%Cu alloy by transient liquid phase sintering.. Journal of Japan Institute of Light Metals 46:4, pages 171-176.
Crossref
V. A. Brodov, A. V. Zhil'tsov, Yu. V. Levinskii & G. N. Romanov. (1992) Volumetric deformation of Al-4.4% Cu and Al-4.4% Cu-0.5% Mg compacts during sintering. Soviet Powder Metallurgy and Metal Ceramics 31:2, pages 108-111.
Crossref
V. A. Brodov, S. V. Belov, A. V. Zhil'tsov, Yu. V. Levinskii & G. V. Malakhov. (1990) Formation of the structure in sintering and the strength properties of Al-Cu P/M alloys. Soviet Powder Metallurgy and Metal Ceramics 29:10, pages 808-812.
Crossref
L. L. Wang, Z. A. Munir & J. B. Holt. (1990) The combustion synthesis of copper aluminides. Metallurgical Transactions B 21:3, pages 567-577.
Crossref
H. Danninger, G. Jangg & M. Giahi. (1988) Production of stainless steel filters by liquid phase activated Gravity sintering. Materialwissenschaft und Werkstofftechnik 19:6, pages 205-211.
Crossref
A. P. Savitskii, G. N. Romanov, L. S. Martsunova & V. V. Zhdanov. (1988) Nature of the growth of Al-Cu powder compacts during liquid-phase sintering. Soviet Powder Metallurgy and Metal Ceramics 27:5, pages 348-351.
Crossref
A. B. Al'tman, V. A. Brodov, A. V. Zhil'tsov & I. P. Melashenko. (1987) Effect of sintering conditions on the structure and mechanical properties of P/M aluminum base alloys. Soviet Powder Metallurgy and Metal Ceramics 26:9, pages 713-717.
Crossref
M. Jeandin, S. Rupp, J. Massol & Y. Bienvenu. 1987. Sintering’85. Sintering’85
179
188
.
A. K. Jha, G. S. Upadhyaya & P. K. Rohatgi. (1986) Properties of composites of 2014 aluminium alloy with Ni-Mo-based metallic glass particles. Journal of Materials Science 21:5, pages 1502-1508.
Crossref
M. Jeandin, S. Rupp, J. Massol & Y. Bienvenu. (1986) Structural study and image analysis of rapidly cooled supersolidus-sintered Astroloy. Materials Science and Engineering 77, pages 139-147.
Crossref
A. P. Savitskii, G. N. Romanov & L. S. Martsunova. (1985) Deformation of aluminum-copper powder solids during liquid-phase sintering. Soviet Powder Metallurgy and Metal Ceramics 24:8, pages 617-621.
Crossref
Randall M. GermanRandall M. German. 1985. Liquid Phase Sintering. Liquid Phase Sintering
181
199
.
Randall M. GermanRandall M. German. 1985. Liquid Phase Sintering. Liquid Phase Sintering
157
179
.
Randall M. GermanRandall M. German. 1985. Liquid Phase Sintering. Liquid Phase Sintering
65
99
.
Randall M. GermanRandall M. German. 1985. Liquid Phase Sintering. Liquid Phase Sintering
43
64
.
E. Ramasamy & P. Ramakrishnan. 1984. Thermal Expansion 8. Thermal Expansion 8
227
233
.