Rova-Karine Rajaonarivony, Xavier Rouau, Jean-Michel Commandré, Charlène Fabre, Jean-Eudes Maigret, Xavier Falourd, Sophie Le Gall, Bruno Piriou, Camille Goudenhooft, Sylvie Durand, Alain Bourmaud, Johnny Beaugrand & Claire Mayer-Laigle. (2023) Fine comminution of torrefied wheat straw for energy applications: properties of the powder and energy balances of the production route. Sustainable Energy & Fuels 7:24, pages 5655-5668.
Crossref
Hohan Bae, In-Ho Kim, Hyun-Kuk Park, Jun-Young Park & Sun-Ju Song. (2022) Nonideal defect structure and high-temperature transport properties of misfit-layered cobalt oxide. Journal of Solid State Chemistry 313, pages 123299.
Crossref
V.M. Solorio, H.J. Vergara-Hernández, L. Olmos, D. Bouvard, J. Chávez, O. Jimenez & N. Camacho. (2022) Effect of the Ag addition on the compressibility, sintering and properties of Ti6Al4V/xAg composites processed by powder metallurgy. Journal of Alloys and Compounds 890, pages 161813.
Crossref
Kostas Giannis, Carsten Schilde, Jan Henrik Finke & Arno Kwade. (2021) Modeling of High-Density Compaction of Pharmaceutical Tablets Using Multi-Contact Discrete Element Method. Pharmaceutics 13:12, pages 2194.
Crossref
Elena Mihalcea, Luis Olmos, Héctor Vergara-Hernández, Omar Jimenez, Jorge Chávez & Dante Arteaga. (2021) Effect of CoCrMo Addition on Ti6Al4V/xCoCrMo Biomedical Composites Processed by Powder Metallurgy. Metals 11:10, pages 1523.
Crossref
Austin A. Ward, Christopher A. Hareland, Nathan E. Palmerio & Zachary C. Cordero. (2020) Thermally Activated Jamming in Ultrasonic Powder Compaction. Advanced Engineering Materials 23:1, pages 2001019.
Crossref
Joseph R. Carazzone, Christophe L. Martin & Zachary C. Cordero. (2020) Crack initiation, propagation, and arrest in sintering powder aggregates. Journal of the American Ceramic Society 103:9, pages 4754-4773.
Crossref
Omid Mokhtari. (2019) A review: Formation of voids in solder joint during the transient liquid phase bonding process - Causes and solutions. Microelectronics Reliability 98, pages 95-105.
Crossref
Hunter A. Rauch, Yan Chen, Ke An & Hang Z. Yu. (2019) In situ investigation of stress-induced martensitic transformation in granular shape memory ceramic packings. Acta Materialia 168, pages 362-375.
Crossref
Henrik Jonsson, Göran Alderborn & Göran Frenning. (2019) Evaluation of bulk compression using a discrete element procedure calibrated with data from triaxial compression experiments on single particles. Powder Technology 345, pages 74-81.
Crossref
Ron Winter & Graham McShane. 2019. Shock Phenomena in Granular and Porous Materials. Shock Phenomena in Granular and Porous Materials
255
294
.
Ileana Nicoleta Popescu & Ruxandra Vidu. (2018) Compaction Behaviour Modelling of Metal-Ceramic Powder Mixtures. A Review. Scientific Bulletin of Valahia University - Materials and Mechanics 16:14, pages 28-37.
Crossref
Ileana Nicoleta Popescu & Ruxandra Vidu. (2018) Densification Mechanism, Elastic-Plastic Deformations and Stress-Strain Relations of Compacted Metal-Ceramic Powder Mixtures (Review). Scientific Bulletin of Valahia University - Materials and Mechanics 16:14, pages 7-12.
Crossref
Josefina Nordström, Göran Alderborn & Göran Frenning. (2018) Compressibility and tablet forming ability of bimodal granule mixtures: Experiments and DEM simulations. International Journal of Pharmaceutics 540:1-2, pages 120-131.
Crossref
Chi Hyeong Ahn, Won June Choi, Chun Woong Park, Seung Yeong Lee & Young Do Kim. (2018) Densification of Mo Nanopowders by Ultra High Pressure Compaction. Korean Journal of Materials Research 28:3, pages 166-173.
Crossref
Geuntak Lee, Eugene A. Olevsky, Charles Manière, Andrey Maximenko, Oleg Izhvanov, Christina Back & Joanna McKittrick. (2018) Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering. Acta Materialia 144, pages 524-533.
Crossref
Alexander S. Petersen, Andrew M. Cheung, Henry J. Neilson, S. Joseph Poon, Gary J. Shiflet & John J. Lewandowski. (2017) Processing and Properties of Ni-Based Bulk Metallic Glass via Spark Plasma Sintering of Pulverized Amorphous Ribbons. MRS Advances 2:61, pages 3815-3820.
Crossref
Herbert Danninger, Raquel de Oro Calderon & Christian Gierl‐Mayer. 2003. Ullmann's Encyclopedia of Industrial Chemistry. Ullmann's Encyclopedia of Industrial Chemistry
1
57
.
Henrik Jonsson, Johan Gråsjö & Göran Frenning. (2017) Mechanical behaviour of ideal elastic-plastic particles subjected to different triaxial loading conditions. Powder Technology 315, pages 347-355.
Crossref
Hang Z. Yu, Mostafa Hassani-Gangaraj, Zehui Du, Chee Lip Gan & Christopher A. Schuh. (2017) Granular shape memory ceramic packings. Acta Materialia 132, pages 455-466.
Crossref
A. Saboori, C. Novara, M. Pavese, C. Badini, F. Giorgis & P. Fino. (2017) An Investigation on the Sinterability and the Compaction Behavior of Aluminum/Graphene Nanoplatelets (GNPs) Prepared by Powder Metallurgy. Journal of Materials Engineering and Performance 26:3, pages 993-999.
Crossref
Dinesh Setti, Benjamin Kirsch & J.C. Aurich. (2017) An Analytical Method for Prediction of Material Deformation Behavior in Grinding Using Single Grit Analogy. Procedia CIRP 58, pages 263-268.
Crossref
Denise Montesdeoca, Farzaneh Bayat, Andre Espinha, ?lvaro Blanco, Carlos Pecharrom?n & Cefe L?pez. (2016) Monodisperse Silica Spheres Ensembles with Tailored Optical Resonances in the Visible. Particle & Particle Systems Characterization 33:12, pages 871-877.
Crossref
A. D. Sharma, A. K. Sharma & N. Thakur. (2016) Crystallographic, Microstructural, and Mechanical Characterization of Dynamically Processed EP741NP Superalloy. Metallurgical and Materials Transactions B 47:4, pages 2479-2486.
Crossref
Henrik Jonsson & G?ran Frenning. (2016) Investigations of single microcrystalline cellulose-based granules subjected to confined triaxial compression. Powder Technology 289, pages 79-87.
Crossref
H. Assadi, I. Irkhin, H. Gutzmann, F. G?rtner, M. Schulze, M. Villa Vidaller & T. Klassen. (2015) Determination of plastic constitutive properties of microparticles through single particle compression. Advanced Powder Technology 26:6, pages 1544-1554.
Crossref
G?ran Frenning. (2015) Towards a mechanistic contact model for elastoplastic particles at high relative densities. Finite Elements in Analysis and Design 104, pages 56-60.
Crossref
Ronald Machaka & Hilda K. Chikwanda. (2015) Analysis of the Cold Compaction Behavior of Titanium Powders: A Comprehensive Inter-model Comparison Study of Compaction Equations. Metallurgical and Materials Transactions A 46:9, pages 4286-4297.
Crossref
Chrysovalantis Tsigginos, John Strong & Antonios Zavaliangos. (2015) On the force–displacement law of contacts between spheres pressed to high relative densities. International Journal of Solids and Structures 60-61, pages 17-27.
Crossref
R.Thyagarajan, G.M.D. Cantin, B.P. Kashyap & C.J. Bettles. (2015) Modelling compaction behaviour of nickel–phosphorus and nickel–boron electroless coated titanium powders. Powder Technology 274, pages 53-61.
Crossref
Henrik Jonsson, Johan Gråsjö, Josefina Nordström, Niklas Johansson & Göran Frenning. (2015) An apparatus for confined triaxial testing of single particles. Powder Technology 270, pages 121-127.
Crossref
R E Winter, M Cotton, E J Harris, J R Maw, D J Chapman, D E Eakins & G McShane. (2014) Plate-impact loading of cellular structures formed by selective laser melting. Modelling and Simulation in Materials Science and Engineering 22:2, pages 025021.
Crossref
Randall M. German. (2014) Coordination number changes during powder densification. Powder Technology 253, pages 368-376.
Crossref
Russell Goodall & Andreas Mortensen. 2014. Physical Metallurgy. Physical Metallurgy
2399
2595
.
Randall M. German. 2014. Sintering: from Empirical Observations to Scientific Principles. Sintering: from Empirical Observations to Scientific Principles
305
354
.
Andreas Mortensen, Yves Conde, Andreas Rossoll & Christopher San Marchi. (2013) Scaling of conductivity and Young’s modulus in replicated microcellular materials. Journal of Materials Science 48:23, pages 8140-8146.
Crossref
Kouichi Yasuda, Fumitaka Takase & Yohtaro Matsuo. (2013) Stochastic analysis on coordination number distribution of particles during powder compaction. Advanced Powder Technology 24:5, pages 871-878.
Crossref
Rainer Oberacker. 2013. Ceramics Science and Technology. Ceramics Science and Technology
1
37
.
D. A. Fredenburg & N. N. Thadhani. (2013) Predicting the shock compression response of heterogeneous powder mixtures. Journal of Applied Physics 113:22.
Crossref
D. A. Fredenburg & N. N. Thadhani. (2013) On the applicability of the P-α and P-λ models to describe the dynamic compaction response of highly heterogeneous powder mixtures. Journal of Applied Physics 113:4.
Crossref
Juan Manuel Montes, Francisco G. Cuevas, Jesús Cintas & Ranier Sepúlveda. (2012) Modelling of three powder compaction laws for cold die pressing. International Journal of Materials Research 103:12, pages 1444-1454.
Crossref
W. Chen, Y. Yamamoto, W.H. Peter, M.B. Clark, S.D. Nunn, J.O. Kiggans, T.R. Muth, C.A. Blue, J.C. Williams & K. Akhtar. (2012) The investigation of die-pressing and sintering behavior of ITP CP-Ti and Ti-6Al-4V powders. Journal of Alloys and Compounds 541, pages 440-447.
Crossref
S. Henke, H.-P. Gail, M. Trieloff, W. H. Schwarz & T. Kleine. (2012) Thermal history modelling of the H?chondrite parent body. Astronomy & Astrophysics 545, pages A135.
Crossref
S. Henke, H.-P. Gail, M. Trieloff, W. H. Schwarz & T. Kleine. (2012) Thermal evolution and sintering of chondritic planetesimals. Astronomy & Astrophysics 537, pages A45.
Crossref
Stephen M. Walley. 2012. Adiabatic Shear Localization. Adiabatic Shear Localization
267
310
.
W. Chen, Y. Yamamoto, W.H. Peter, S.B. Gorti, A.S. Sabau, M.B. Clark, S.D. Nunn, J.O. Kiggans, C.A. Blue, J.C. Williams, B. Fuller & K. Akhtar. (2011) Cold compaction study of Armstrong Process? Ti?6Al?4V powders. Powder Technology 214:2, pages 194-199.
Crossref
Rainer Oberacker. 2011. Ceramics Science and Technology. Ceramics Science and Technology
1
37
.
Christopher Wehrenberg, Brian Zande, S.G. Sankar & Naresh Thadhani. (2011) Mechanically induced phase transition in Fe4N during ball milling and shock compression of powders. Materials Science and Engineering: A 528:13-14, pages 4837-4839.
Crossref
Stephen J. Gerdemann & Paul D. Jablonski. (2010) Compaction of Titanium Powders. Metallurgical and Materials Transactions A 42:5, pages 1325-1333.
Crossref
M.F. Moreno & C.J.R. González Oliver. (2011) Densification of Al powder and Al–Cu matrix composite (reinforced with 15% Saffil short fibres) during axial cold compaction. Powder Technology 206:3, pages 297-305.
Crossref
Manish G. Bothara, Sundar V. Atre, Seong-Jin Park, Randall M. German, T.S. Sudarshan & R. Radhakrishnan. (2010) Sintering Behavior of Nanocrystalline Silicon Carbide Using a Plasma Pressure Compaction System: Master Sintering Curve Analysis. Metallurgical and Materials Transactions A 41:12, pages 3252-3261.
Crossref
J. M. Montes, F. G. Cuevas, J. Cintas & Y. Torres. (2010) Powder compaction law for cold die pressing. Granular Matter 12:6, pages 617-627.
Crossref
D. Anthony Fredenburg, Naresh N. Thadhani & Tracy J. Vogler. (2010) Shock consolidation of nanocrystalline 6061-T6 aluminum powders. Materials Science and Engineering: A 527:15, pages 3349-3357.
Crossref
Ha Neul Kim, Soon Nam Chang & Do Kyung Kim. (2009) Enhanced microhardness of nanocrystalline carbon nanotube-reinforced Cu composite using planar shock-wave compaction. Scripta Materialia 61:9, pages 871-874.
Crossref
V. G. Borovik. (2009) Modeling the formation of internal boundaries in an unidirectional fiber strand compacted in plastic state. Powder Metallurgy and Metal Ceramics 48:7-8, pages 388-395.
Crossref
Charles J. Capozzi & Rosario A. Gerhardt. (2008) Correlation of the ac Electrical Conductivity and the Microstructure of PMMA/ITO Nanocomposites That Possess Phase-Segregated Microstructures. The Journal of Physical Chemistry C 112:49, pages 19372-19382.
Crossref
E. R. Strutt, E. A. Olevsky & M. A. Meyers. (2008) Combustion synthesis/quasi-isostatic pressing of TiC–NiTi cermets: processing and mechanical response. Journal of Materials Science 43:19, pages 6513-6526.
Crossref
J. Reis & R. Chaim. (2008) Densification maps for spark plasma sintering of nanocrystalline MgO ceramics: Particle coarsening and grain growth effects. Materials Science and Engineering: A 491:1-2, pages 356-363.
Crossref
A. Marmottant, L. Salvo, C.L. Martin & A. Mortensen. (2008) Coordination measurements in compacted NaCl irregular powders using X-ray microtomography. Journal of the European Ceramic Society 28:13, pages 2441-2449.
Crossref
HA NEUL KIM, DO KYUNG KIM, SOON NAM CHANG & NARESH N. THADHANI. (2012)
SHOCK COMPACTION OF
Gd
-DOPED CERIA CERAMICS
. International Journal of Modern Physics B 22:09n11, pages 1686-1691.
Crossref
Daniel E. Eakins & Naresh N. Thadhani. (2008) The shock-densification behavior of three distinct Ni+Al powder mixtures. Applied Physics Letters 92:11.
Crossref
Marc André Meyers, Po-Yu Chen, Albert Yu-Min Lin & Yasuaki Seki. (2008) Biological materials: Structure and mechanical properties. Progress in Materials Science 53:1, pages 1-206.
Crossref
Jane R Blackford. (2007) Sintering and microstructure of ice: a review. Journal of Physics D: Applied Physics 40:21, pages R355-R385.
Crossref
Z. Razavi Hesabi, H.R. Hafizpour & A. Simchi. (2007) An investigation on the compressibility of aluminum/nano-alumina composite powder prepared by blending and mechanical milling. Materials Science and Engineering: A 454-455, pages 89-98.
Crossref
Yuttanant Boonyongmaneerat. (2007) Mechanical properties of partially sintered materials. Materials Science and Engineering: A 452-453, pages 773-780.
Crossref
Zhi Yu Xiao, Tungwai Leo Ngai & Yuan Yuan Li. (2007) Investigation on the Densification Mechanism of Warm Compaction. Materials Science Forum 539-543, pages 2699-2705.
Crossref
Olle Skrinjar, Per-Lennart Larsson & Bertil Storåkers. (2007) Local Contact Compliance Relations at Compaction of Composite Powders. Journal of Applied Mechanics 74:1, pages 164-168.
Crossref
J.M. Montes, F.G. Cuevas & J. Cintas. (2006) A new expression for the effective pressure on powders under compression. Computational Materials Science 36:3, pages 329-337.
Crossref
R. Chaim & M. Margulis. (2005) Densification maps for spark plasma sintering of nanocrystalline MgO ceramics. Materials Science and Engineering: A 407:1-2, pages 180-187.
Crossref
G. Plantard & M. Papini. (2005) Mechanical and electrical behaviors of polymer particles. Experimental study of the contact area between two particles. Experimental validation of a numerical model. Granular Matter 7:1, pages 1-12.
Crossref
Michael Braginsky, Veena Tikare & Eugene Olevsky. (2005) Numerical simulation of solid state sintering. International Journal of Solids and Structures 42:2, pages 621-636.
Crossref
Olle Skrinjar & Per-Lennart Larsson. (2004) On discrete element modelling of compaction of powders with size ratio. Computational Materials Science 31:1-2, pages 131-146.
Crossref
Xiao Xu & Naresh N. Thadhani. (2004) Investigation of shock-induced reaction behavior of as-blended and ball-milled Ni+Ti powder mixtures using time-resolved stress measurements. Journal of Applied Physics 96:4, pages 2000-2009.
Crossref
Olle Skrinjar & Per-Lennart Larsson. (2004) Cold compaction of composite powders with size ratio. Acta Materialia 52:7, pages 1871-1884.
Crossref
C. Goujon, J.-M. Barnola & C. Ritz. (2003) Modeling the densification of polar firn including heat diffusion: Application to close-off characteristics and gas isotopic fractionation for Antarctica and Greenland sites. Journal of Geophysical Research: Atmospheres 108:D24, pages n/a-n/a.
Crossref
S.M Sweeney & C.L Martin. (2003) Pore size distributions calculated from 3-D images of DEM-simulated powder compacts. Acta Materialia 51:12, pages 3635-3649.
Crossref
O. Yanagisawa, H. Kuramoto, K. Matsugi & M. Komatsu. (2003) Observation of particle behavior in copper powder compact during pulsed electric discharge. Materials Science and Engineering: A 350:1-2, pages 184-189.
Crossref
S.J. Subramanian & P. Sofronis. (2002) Calculation of a constitutive potential for isostatic powder compaction. International Journal of Mechanical Sciences 44:11, pages 2239-2262.
Crossref
A.S Gandhi & V Jayaram. (2002) Pressure consolidation of amorphous ZrO2–Al2O3 by plastic deformation of powder particles. Acta Materialia 50:8, pages 2137-2149.
Crossref
C.A Schuh & D.C Dunand. (2002) Enhanced densification of zinc powders through thermal cycling. Acta Materialia 50:6, pages 1349-1358.
Crossref
I Sridhar, N.A Fleck & A.R Akisanya. (2001) Cold compaction of an array of cylindrical fibres. International Journal of Mechanical Sciences 43:3, pages 715-742.
Crossref
Jianxin Liu & David P. De Lo. (2001) Particle rearrangement during powder compaction. Metallurgical and Materials Transactions A 32:12, pages 3117-3124.
Crossref
S.J. Subramanian & P. Sofronis. (2001) Modeling the interaction between densification mechanisms in powder compaction. International Journal of Solids and Structures 38:44-45, pages 7899-7918.
Crossref
A.K. Ariffin, Md.Mujibur Rahman, N. Muhamad & J. Sahari. (2001) Thermal–mechanical model of warm powder compaction process. Journal of Materials Processing Technology 116:1, pages 67-71.
Crossref
J. Gil Sevillano. (2011) Size effects in powder compaction. Journal of Materials Research 16:5, pages 1238-1240.
Crossref
W Wu, G Jiang, R.H Wagoner & G.S Daehn. (2000) Experimental and numerical investigation of idealized consolidation. Acta Materialia 48:17, pages 4323-4330.
Crossref
I Sridhar & N.A Fleck. (2000) Yield behaviour of cold compacted composite powders. Acta Materialia 48:13, pages 3341-3352.
Crossref
Peizhen K. Lu & John J. Lannutti. (2004) Density Gradients and Sintered Dimensional Tolerance in Compacts Formed from Spray‐Dried Alumina. Journal of the American Ceramic Society 83:6, pages 1393-1398.
Crossref
C. Schuh, P. No?l & D.C. Dunand. (2000) Enhanced densification of metal powders by transformation-mismatch plasticity. Acta Materialia 48:8, pages 1639-1653.
Crossref
R. Vancheeswaran, J. M. Kunze, D. M. Elzey & H. N. G. Wadley. (2000) Mechanisms, models, and simulations of metal-coated fiber consolidation. Metallurgical and Materials Transactions A 31:4, pages 1271-1282.
Crossref
Wenlu Zhu, Brian Evans & Yves Bernabé. (1999) Densification and permeability reduction in hot-pressed calcite: A kinetic model. Journal of Geophysical Research: Solid Earth 104:B11, pages 25501-25511.
Crossref
R. Suryanarayanan Iyer & S.M.L. Sastry. (1999) Consolidation of nanoparticles—development of a micromechanistic model. Acta Materialia 47:10, pages 3079-3098.
Crossref
D.P. DeLo & H.R. Piehler. (1999) Early stage consolidation mechanisms during hot isostatic pressing of Ti–6Al–4V powder compacts. Acta Materialia 47:9, pages 2841-2852.
Crossref
V.J. Garc??a & C.H. Schilling. (1999) Ultrasonic velocity and reduction of surface area during solid-state sintering. Materials Science and Engineering: A 265:1-2, pages 42-49.
Crossref
M.A. Meyers, D.J. Benson & E.A. Olevsky. (1999) Shock consolidation: microstructurally-based analysis and computational modeling. Acta Materialia 47:7, pages 2089-2108.
Crossref
D.P. DeLo, R.E. Dutton & S.L. Semiatin. (1999) A comparison of discrete element model predictions to observations of metal powder consolidation. Scripta Materialia 40:10, pages 1103-1109.
Crossref
N.S. Stoloff. (1999) An overview of powder processing of silicides and their composites. Materials Science and Engineering: A 261:1-2, pages 169-180.
Crossref
B. Storåkers, N.A . Fleck & R.M. McMeeking. (1999) The viscoplastic compaction of composite powders. Journal of the Mechanics and Physics of Solids 47:4, pages 785-815.
Crossref
Brian Evans, Yves Bernabé & Wenlu Zhu. 1999. Growth, Dissolution and Pattern Formation in Geosystems. Growth, Dissolution and Pattern Formation in Geosystems
327
344
.
A.R. Deshmukh, T. Sundararajan, R.K. Dube & S. Bhargava. (1998) Analysis of cold densification rolling of a sintered porous metal strip. Journal of Materials Processing Technology 84:1-3, pages 56-72.
Crossref
Jong-Heon Lee & Naresh N. Thadhani. (2011) Enhanced solid-state reaction kinetics of shock-compressed titanium and carbon powder mixtures. Journal of Materials Research 13:11, pages 3160-3173.
Crossref
Susan K. Lum, Stephen W. Hoag & Wendy C. Duncan-Hewitt. (1998) Powder Densification. 2. Viscoelastic Material Properties in Modeling the Uniaxial Compaction of Powders. Journal of Pharmaceutical Sciences 87:8, pages 909-916.
Crossref
L. Arnaud, V. Lipenkov, J. M Barnola, M. Gay & P. Duval. (2017) Modelling of the densification of polar firn: characterization of the snow–firn transition. Annals of Glaciology 26, pages 39-44.
Crossref
L. Lü & M. O. LaiL. Lü & M. O. Lai. 1998. Mechanical Alloying. Mechanical Alloying
173
187
.
A. Casagranda & P. Sofronis. (1997) Numerical observations of scaling laws in the consolidation of powder compacts. Acta Materialia 45:11, pages 4835-4845.
Crossref
Haydn N.G. Wadley, Terry S. Davison & Joseph M. Kunze. (1997) Densification of metal coated fibers by elastic-plastic contact deformation. Composites Part B: Engineering 28:3, pages 233-242.
Crossref
Henry R. Piehler & David P. Delo. (1997) Physical modeling of powder consolidation processes. Progress in Materials Science 42:1-4, pages 263-276.
Crossref
P.-L. Larsson, S. Biwa & B. Storåkers. (1996) Analysis of cold and hot isostatic compaction of spherical particles. Acta Materialia 44:9, pages 3655-3666.
Crossref
Hui Li, S. Saigal & P.T. Wang. (1996) A solution for the contact between two spherical particles undergoing large deformation. Acta Materialia 44:7, pages 2591-2598.
Crossref
T. E. Royal, S. Namjoshi & N. N. Thadhani. (1996) Mechanistic processes influencing shock chemistry in powder mixtures of the Ti-Si, Ti-Al, and Ti-B systems. Metallurgical and Materials Transactions A 27:7, pages 1761-1771.
Crossref
Albert Casagranda, Junde Xu, Anthony G. Evans & Robert M. McMeeking. (1996) Pressure Consolidation of Fiber-Reinforced Oxide Matrix Composites: Experiments and Simulations. Journal of the American Ceramic Society 79:5, pages 1265-1272.
Crossref
R. Gampala, D.M. Elzey & H.N.G. Wadley. (1996) Power-law creep blunting of contacts and its implications for consolidation modeling. Acta Materialia 44:4, pages 1479-1495.
Crossref
Takayasu Ikegami. (2005) Theoretical Description of a Two‐dimensional Compaction Process of Cylinders. Journal of the American Ceramic Society 79:1, pages 153-160.
Crossref
H.E. EXNER & E. ARZT. 1996. Physical Metallurgy. Physical Metallurgy
2627
2662
.
R. E. Dutton, S. Shamasundar & S. L. Semiatin. (1995) Modeling the hot consolidation of ceramic and metal powders. Metallurgical and Materials Transactions A 26:8, pages 2041-2051.
Crossref
P. Arató, E. Besenyei, A. Kele & F. Wéber. (2004) Mechanical properties in the initial stage of sintering. Journal of Materials Science 30:7, pages 1863-1871.
Crossref
N. Ogbonna & N.A. Fleck. (1995) Compaction of an array of spherical particles. Acta Metallurgica et Materialia 43:2, pages 603-620.
Crossref
S.M.L. Sastry, R. Suryanarayanan & K.L. Jerina. (1995) Consolidation and mechanical properties of MoSi2-based materials. Materials Science and Engineering: A 192-193, pages 881-890.
Crossref
R. Gampala, D.M. Elzey & H.N.G. Wadley. (1994) Plastic deformation of asperities during consolidation of plasma sprayed metal matrix composite monotape. Acta Metallurgica et Materialia 42:9, pages 3209-3221.
Crossref
J -F. Baumard & P. Coupelle. (1994) Compaction of plastic powders. Journal of Materials Science Letters 13:2, pages 93-95.
Crossref
D. Bouvard. (1993) Modelling the densification of powder composites by power law creep. Acta Metallurgica et Materialia 41:5, pages 1413-1420.
Crossref
R. B. Clough & R. J. Schaefer. (1993) Effects of shear stress and change in void shape on distortion and densification of powder compacts. Materials Science and Technology 9:4, pages 328-335.
Crossref
M. A. Meyers, S. S. Shang & K. Hokamoto. 1993. Shock Waves in Materials Science. Shock Waves in Materials Science
145
176
.
L.T. Kuhn & R.M. McMeeking. (1992) Power-law creep of powder bonded by isolated contacts. International Journal of Mechanical Sciences 34:7, pages 563-573.
Crossref
R.R. Vance & T.H. Courtney. (1992) Hot isostatic pressing of mechanically alloyed CuNb powders. Scripta Metallurgica et Materialia 26:9, pages 1435-1440.
Crossref
R.M. McMeeking & L.T. Kuhn. (1992) A diffusional creep law for powder compacts. Acta Metallurgica et Materialia 40:5, pages 961-969.
Crossref
M. Dietze, H.P. Buchkremer & D. St?ver. (1991) Densification behaviour of a PM titanium alloy during HIP. Metal Powder Report 46:10, pages 30-35.
Crossref
E.N. Hiestand. (1991) Tablet bond. I. a theoretical model. International Journal of Pharmaceutics 67:3, pages 217-229.
Crossref
D.H. Zeuch. (1990) Isostatic hot-pressing mechanism maps for pure and natural sodium chloride?applications to nuclear waste isolation in bedded and domal salt formations. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 27:6, pages 505-524.
Crossref
Anand Jagota, Kurt R. Mikeska & Rajendra K. Bordia. (2005) Isotropic Constitutive Model for Sintering Particle Packings. Journal of the American Ceramic Society 73:8, pages 2266-2273.
Crossref
N. Naito, L. C. De Jonghe & M. N. Rahaman. (1990) Pore size distribution during compaction and early stage sintering of silicon nitride. Journal of Materials Science 25:3, pages 1686-1689.
Crossref
Wendy C. Duncan-Hewitt & George C. Weatherly. (1990) Modeling the Uniaxial Compaction of Pharmaceutical Powders Using the Mechanical Properties of Single Crystals. I: Ductile Materials. Journal of Pharmaceutical Sciences 79:2, pages 147-152.
Crossref
D. M. Elzey, J. M. Kunze, J. M. Duva & H. N. G. Wadley. (2011) Densification Models for Plasma Sprayed Metal Matrix Composite Foils. MRS Proceedings 207.
Crossref
David J. Holcomb & David H. Zeuch. (1990) Modeling the consolidation of a porous aggregate of dry salt as isostatic hot pressing. Journal of Geophysical Research 95:B10, pages 15611.
Crossref
Beong-Bok Hwang & Shiro Kobayashi. (1990) Deformation characterization of powdered metals in compaction. International Journal of Machine Tools and Manufacture 30:2, pages 309-323.
Crossref
H. E. Exner & E. Arzt. 1990. Sintering Key Papers. Sintering Key Papers
157
184
.
E.K.H. Li & P.D. Funkenbusch. (1989) Modeling of the densification rates of monosized and bimodal-sized particle systems during hot isostatic pressing (HIP). Acta Metallurgica 37:6, pages 1645-1655.
Crossref
R. Laag, W. A. Kaysser, R. Maurer & G. Petzow. 1989. Science of Sintering. Science of Sintering
295
309
.
A. Jagota, P.R. Dawson & J.T. Jenkins. (1988) An anisotropic continuum model for the sintering and compaction of powder packings. Mechanics of Materials 7:3, pages 255-269.
Crossref
A. Jagota & P.R. Dawson. (1988) Micromechanical modeling of powder compacts—I. Unit problems for sintering and traction induced deformation. Acta Metallurgica 36:9, pages 2551-2561.
Crossref
B. K. Lograsso & D. A. Koss. (1988) Densification of titanium powder during hot isostatic pressing. Metallurgical Transactions A 19:7, pages 1767-1773.
Crossref
B. A. Aref'ev, V. I. Bakarinova, A. V. Rebrov & Z. S. Syamiullin. (1988) Special features of compacting aluminum powders in cold pressing. Soviet Powder Metallurgy and Metal Ceramics 27:3, pages 207-211.
Crossref
D. Bouvard & E. Ouedraogo. (1987) Modelling of hot isostatic pressing: A new formulation using random variables. Acta Metallurgica 35:9, pages 2323-2328.
Crossref
J.L. Chermant, M. Coster, G. Giraud, J.P. Jernot & H. Robine. (1986) Détermination du nombre de coordination dans un empilement de sphères à partir de sections planes aléatoires. Journal de Physique 47:5, pages 829-837.
Crossref
H. Fischmeister & E. Arzt. 1986. Science and Technology of the Undercooled Melt. Science and Technology of the Undercooled Melt
137
155
.
A.S. Helle, K.E. Easterling & M.F. Ashby. (1985) Hot-isostatic pressing diagrams: New developments. Acta Metallurgica 33:12, pages 2163-2174.
Crossref
R. M. German. (1985) The contiguity of liquid phase sintered microstructures. Metallurgical Transactions A 16:7, pages 1247-1252.
Crossref
Hans T Larker. (1985) Recent advances in hot isostatic pressing processes for high performance ceramics. Materials Science and Engineering 71, pages 329-332.
Crossref
Jose M. C. Azevedo, Andre Cabrera Serrenho, Christopher J. Cleaver, Jonathan M. Cullen & Julian M. Allwood. (2022) Welding 316L Stainless Steel in the Solid-State with an Interlayer of Powder. SSRN Electronic Journal.
Crossref