Citations (54)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
. (2012) Mining the PM archive. Powder Metallurgy 55:1, pages 1-2.
Read now
Read now
E. J. Lavernia, J. D. Ayers & T. S. Srivatsan. (1992) Rapid solidification processing with specific application to aluminium alloys. International Materials Reviews 37:1, pages 1-44.
Read now
Read now
P. S. Grant & B. Cantor. (1990) Infrared Thermal Imaging Measurement of Deposit Surface Temperatures During Spray Deposition. Powder Metallurgy 33:2, pages 144-146.
Read now
Read now
R. K. Dube. (1990) Metal strip via roll compaction and related powder metallurgy routes. International Materials Reviews 35:1, pages 253-292.
Read now
Read now
J. V. Wood. (1988) Direct casting of sheet by chill block techniques. Materials Science and Technology 4:3, pages 189-193.
Read now
Read now
Articles from other publishers (49)
Pallav Kant, Robin B. J. KoldeweijKirsten HarthMichiel A. J. van Limbeek & Detlef Lohse. (2020) Fast-freezing kinetics inside a droplet impacting on a cold surface. Proceedings of the National Academy of Sciences 117:6, pages 2788-2794.
Crossref
Crossref
Clemens Schmalzried & Karl A. Schwetz. 2013. Ceramics Science and Technology. Ceramics Science and Technology
131
227
.
Clemens Schmalzried & Karl A. Schwetz. 2010. Ceramics Science and Technology. Ceramics Science and Technology
131
227
.
Enrique J. Lavernia & T. S. Srivatsan. (2010) The rapid solidification processing of materials: science, principles, technology, advances, and applications. Journal of Materials Science 45:2, pages 287-325.
Crossref
Crossref
K. Raju, S. N. Ojha & A. P. Harsha. (2008) Spray forming of aluminum alloys and its composites: an overview. Journal of Materials Science 43:8, pages 2509-2521.
Crossref
Crossref
Udo Fritsching. 2009. Spray Simulation. Spray Simulation.
Y.-H.Frank Su, C.-S.Sam Chiang & Chi Y.A Tsao. (2004) Extrusion characteristics of spray-formed AC9A aluminum alloy. Materials Science and Engineering: A 364:1-2, pages 305-312.
Crossref
Crossref
D.N. Hanlon & W.M. Rainforth. (2003) The rolling sliding wear response of conventionally processed and spray formed high speed steel at ambient and elevated temperature. Wear 255:7-12, pages 956-966.
Crossref
Crossref
K.G Satyanarayana, S.N Ojha, D Naresh Nath Kumar & G.V.S Sastry. (2001) Studies on spray casting of Al-alloys and their composites. Materials Science and Engineering: A 304-306, pages 627-631.
Crossref
Crossref
. 2001. Composites. Composites
579
588
.
Wilhelm Ervens & Heinrich Wilmesmeier. 2003. Ullmann's Encyclopedia of Industrial Chemistry. Ullmann's Encyclopedia of Industrial Chemistry.
J H Hattel, N H Pryds, J Thorborg & P Ottosen. (1999) A quasi-stationary numerical model of atomized metal droplets. I: Model formulation. Modelling and Simulation in Materials Science and Engineering 7:3, pages 413-430.
Crossref
Crossref
Bing Li & Enrique J. Lavernia. 1999. Non-equilibrium Processing of Materials. Non-equilibrium Processing of Materials
153
193
.
Y. H. Su & C. -Y. A. Tsao. (1997) Modeling of solidification of molten metal droplet during atomization. Metallurgical and Materials Transactions B 28:6, pages 1249-1255.
Crossref
Crossref
Howard Gabel & Ralph Tapphorn. (1997) Solid-state spray forming of aluminum near-net shapes. JOM 49:8, pages 31-33.
Crossref
Crossref
D.N. Hanlon, W.M. Rainforth & C.M. Sellars. (1997) The effect of processing route, composition and hardness on the wear response of chromium bearing steels in a rolling-sliding configuration. Wear 203-204, pages 220-229.
Crossref
Crossref
P. Vermaut & P. Ruterana. (1996) A TEM study of a copper rich phase grown on an Al3Zr dispersoid in a spray formed AlSiC composite. Acta Materialia 44:6, pages 2445-2455.
Crossref
Crossref
P.J. Ward, H.V. Atkinson, P.R.G. Anderson, L.G. Elias, B. Garcia, L. Kahlen & J-M. Rodriguez-ibabe. (1996) Semi-solid processing of novel MMCs based on hypereutectic aluminium-silicon alloys. Acta Materialia 44:5, pages 1717-1727.
Crossref
Crossref
T.W. CLYNE. 1996. Physical Metallurgy. Physical Metallurgy
2567
2625
.
P. VERMAUT & P. RUTERANA. (1995) Microstructure of a spray-formed Al/SiC composite. Journal of Microscopy 177:3, pages 387-398.
Crossref
Crossref
P.S. Grant. (1995) Spray forming. Progress in Materials Science 39:4-5, pages 497-545.
Crossref
Crossref
T.S. Srivatsan, T.S. Sudarshan & E.J. Lavernia. (1995) Processing of discontinuously-reinforced metal matrix composites by rapid solidification. Progress in Materials Science 39:4-5, pages 317-409.
Crossref
Crossref
X. Liang & E. J. Lavernia. (1994) Evolution of interaction domain microstructure during spray deposition. Metallurgical and Materials Transactions A 25:11, pages 2341-2355.
Crossref
Crossref
P. R. G. Anderson, A. R. A. McLelland & P. J. Ward. Thixoforming of Aluminium-Based Metal Matrix Composite Systems. Thixoforming of Aluminium-Based Metal Matrix Composite Systems.
Melissa Orme. (1993) A novel technique of rapid solidification net- form materials synthesis. Journal of Materials Engineering and Performance 2:3, pages 399-405.
Crossref
Crossref
M. Gupta, F. Mohamed, E. Lavernia & T. S. Srivatsan. (1993) Microstructural evolution and mechanical properties of SiC/Al2O3 particulate-reinforced spray-deposited metal-matrix composites. Journal of Materials Science 28:8, pages 2245-2259.
Crossref
Crossref
F. GOURBILLEAU, P. RUTERANA & G. NOUET. (2011) Structure and composition of interfaces in an aluminium metal‐matrix composite. Journal of Microscopy 169:2, pages 233-238.
Crossref
Crossref
D. Huda, M.A. El Baradie & M.S.J. Hashmi. (1993) Metal-matrix composites: Manufacturing aspects. Part I. Journal of Materials Processing Technology 37:1-4, pages 513-528.
Crossref
Crossref
Jung-Hoon Chun, Christian H. Passow & Nam P. Suh. (1993) Droplet-Based Manufacturing. CIRP Annals 42:1, pages 235-238.
Crossref
Crossref
D.G. Morris, M.A. Morris, S. Günter, M. Leboeuf & G. Hollrigl. (1992) Spray deposition of intermetallics based on Al3Ti and TiAl. Scripta Metallurgica et Materialia 27:11, pages 1645-1650.
Crossref
Crossref
X. Liang, J.C. Earthman & E.J. Lavernia. (1992) On the mechanism of grain formation during spray atomization and deposition. Acta Metallurgica et Materialia 40:11, pages 3003-3016.
Crossref
Crossref
A.P. Newbery, B. Cantor, R.M. Jordan & A.R.E. Singer. (1992) Arc spray forming of nickel aluminides. Scripta Metallurgica et Materialia 27:7, pages 915-918.
Crossref
Crossref
M Wu, T.S Srivatsan, J.R Pickens & E.J Lavernia. (1992) Microstructure and mechanical properties of spray deposited Al-Cu-Li-Ag-Mg-Zr. Scripta Metallurgica et Materialia 27:6, pages 761-766.
Crossref
Crossref
Isaac MinkoffIsaac Minkoff. 1992. Materials Processes. Materials Processes
1
31
.
D.G. Morris & M.A. Morris. (2011)
Rapid solidification of Ni
3
Al by Osprey deposition
. Journal of Materials Research 6:2, pages 361-365.
Crossref
Crossref
J. Zhou, J. Duszczyk & B. M. Korevaar. (1991) As-spray-deposited structure of an Al-20Si-5Fe Osprey preform and its development during subsequent processing. Journal of Materials Science 26:19, pages 5275-5291.
Crossref
Crossref
V. V. Bhanu Prasad, K. S. Prasad, A. K. Kuruvilla, A. B. Pandey, B. V. R. Bhat & Y. R. Mahajan. (1991) Composite strengthening in 6061 and Al-4 Mg alloys. Journal of Materials Science 26:2, pages 460-466.
Crossref
Crossref
L.Z. Zhuang, I. Majewska-Glabus, R. Vetter & J. Duszczyk. (1990) Microstructure of the Osprey processed Cr-containing Ni3AlX intermetallic in conjunction with solidification model at the deposition. Scripta Metallurgica et Materialia 24:11, pages 2025-2030.
Crossref
Crossref
J. L. Estrada & J. Duszczyk. (1990) Characteristics of rapidly solidified Al-Si-X preforms produced by the Osprey process. Journal of Materials Science 25:2, pages 1381-1391.
Crossref
Crossref
S. Annavarapu, D. Apelian & R.D. Doherty. 1990. F. Weinberg International Symposium on Solidification Processing. F. Weinberg International Symposium on Solidification Processing
205
214
.
T. Wriedt, K.A. Bauckhage & A. Schone. (1989) Application of Fourier analysis to phase-Doppler-signals generated by rough metal particles. IEEE Transactions on Instrumentation and Measurement 38:5, pages 984-990.
Crossref
Crossref
M.G. McKimpson & T.E. Scott. (1989) Processing and properties of metal matrix composites containing discontinuous reinforcement. Materials Science and Engineering: A 107, pages 93-106.
Crossref
Crossref
E.J. Lavernia & N.J. Grant. (1988) Spray deposition of metals: A review. Materials Science and Engineering 98, pages 381-394.
Crossref
Crossref
M.G. Chu, D.K. Denzer, A.K. Chakrabarti & F.R. Billman. (1988) Evaluation of aluminum and nickel alloy materials produced by spray deposition. Materials Science and Engineering 98, pages 227-232.
Crossref
Crossref
E.J. LAVERNIA & N.J. GRANT. 1988. Rapidly Quenched Metals 6. Rapidly Quenched Metals 6
381
394
.
M.G. CHU, D.K. DENZER, A.K. CHAKRABARTI & F.R. BILLMAN. 1988. Rapidly Quenched Metals 6. Rapidly Quenched Metals 6
227
232
.
H. C. Fiedler, T. F. Sawyer, R. W. Kopp & A. G. Leatham. (2012) The Spray Forming of Superalloys. JOM 39:8, pages 28-33.
Crossref
Crossref
Mauri K. Veistinen, Y. Hara, E. J. Lavernia, R. C. O'Handley & N. J. Grant. (2011) Optimization of Liquid Dynamic Compaction for Fe-Nd-B Magnet Alloys. MRS Proceedings 96.
Crossref
Crossref
T. Ando, E.J. Lavernia & N.J. Grant. (1986) A tem study of the microstructures of a modified 7075 and X2020 aluminum alloys produced by liquid dynamic compaction. Materials Letters 5:1-2, pages 17-28.
Crossref
Crossref