Jie Li, Yunzhu Ma, Qingshan Cai, Wensheng Liu, Youteng Duan & Chaoping Liang. (2022) Influence of Oxygen Content on the Microstructure and Mechanical Properties of Hot Isostatically Pressed 30CrMnSiNi2A Ultra-High Strength Steel. JOM 74:9, pages 3595-3606.
Crossref

Hans Gruber, Eduard Hryha, Kristina Lindgren, Yu Cao, Masoud Rashidi & Lars Nyborg. (2022) The effect of boron and zirconium on the microcracking susceptibility of IN-738LC derivatives in laser powder bed fusion. Applied Surface Science 573, pages 151541.
Crossref

Dmitri Riabov, Masoud Rashidi, Eduard Hryha & Sven Bengtsson. (2020) Effect of the powder feedstock on the oxide dispersion strengthening of 316L stainless steel produced by laser powder bed fusion. Materials Characterization 169, pages 110582.
Crossref

Dmitri Riabov, Eduard Hryha, Masoud Rashidi, Sven Bengtsson & Lars Nyborg. (2020) Effect of atomization on surface oxide composition in 316L stainless steel powders for additive manufacturing. Surface and Interface Analysis 52:11, pages 694-706.
Crossref

Christine Baumgart, Christian Weigelt, Andreas Lißner, Stefan Martin, Christos G. Aneziris & Lutz Krüger. (2020) Processing of 17Cr7Mn6Ni TRIP Steel Powder by Extrusion at Room Temperature and Pressureless Sintering. Advanced Engineering Materials 22:6, pages 2000019.
Crossref

Hans Gruber, Mikael Henriksson, Eduard Hryha & Lars Nyborg. (2019) Effect of Powder Recycling in Electron Beam Melting on the Surface Chemistry of Alloy 718 Powder. Metallurgical and Materials Transactions A 50:9, pages 4410-4422.
Crossref

Bhaskar Dutta, Sudarsanam Babu & Bradley Jared. 2019. Science, Technology and Applications of Metals in Additive Manufacturing. Science, Technology and Applications of Metals in Additive Manufacturing 245 307 .

Tian Liu, Jeremy D. Leazer, Sarath K. Menon & Luke N. Brewer. (2018) Microstructural analysis of gas atomized Al-Cu alloy feedstock powders for cold spray deposition. Surface and Coatings Technology 350, pages 621-632.
Crossref

E. Gil, J. Cortés, I. Iturriza & N. Ordás. (2018) XPS and SEM analysis of the surface of gas atomized powder precursor of ODS ferritic steels obtained through the STARS route. Applied Surface Science 427, pages 182-191.
Crossref

Zachary C. Cordero, Harry M. MeyerIIIIII, Peeyush Nandwana & Ryan R. Dehoff. (2017) Powder bed charging during electron-beam additive manufacturing. Acta Materialia 124, pages 437-445.
Crossref

Pablo Romero, Raquel Oro, Monica Campos, Jose M. Torralba & Roberto Guzman de Villoria. (2015) Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel. Carbon 82, pages 31-38.
Crossref

C. Oikonomou, R. Oro, E. Hryha & L. Nyborg. (2014) Effect of heat treatment in air on surface composition of iron-phosphate based soft magnetic composite components. Materials Science and Engineering: B 189, pages 90-99.
Crossref

Raquel Oro, Eduard Hryha, Mónica Campos & José M. Torralba. (2014) Effect of processing conditions on microstructural features in Mn–Si sintered steels. Materials Characterization 95, pages 105-117.
Crossref

An Ping Long, Song Lin Li, Hang Wang & HuiZhu Chen. (2014) Characterization of oxide on the water-atomized FeMn powder surface. Applied Surface Science 295, pages 180-188.
Crossref

Raquel Oro, Mónica Campos, Eduard Hryha, José Manuel Torralba & Lars Nyborg. (2013) Surface phenomena during the early stages of sintering in steels modified with Fe–Mn–Si–C master alloys. Materials Characterization 86, pages 80-91.
Crossref

D. Chasoglou, E. Hryha, M. Norell & L. Nyborg. (2013) Characterization of surface oxides on water-atomized steel powder by XPS/AES depth profiling and nano-scale lateral surface analysis. Applied Surface Science 268, pages 496-506.
Crossref

K. Zumsande, A. Weddeling, E. Hryha, S. Huth, L. Nyborg, S. Weber, N. Krasokha & W. Theisen. (2012) Characterization of the surface of Fe–19Mn–18Cr–C–N during heat treatment in a high vacuum — An XPS study. Materials Characterization 71, pages 66-76.
Crossref

C. Oikonomou, E. Hryha & L. Nyborg. (2012) Development of methodology for surface analysis of soft magnetic composite powders. Surface and Interface Analysis 44:8, pages 1166-1170.
Crossref

E. Hryha, C. Gierl, L. Nyborg, H. Danninger & E. Dudrova. (2010) Surface composition of the steel powders pre-alloyed with manganese. Applied Surface Science 256:12, pages 3946-3961.
Crossref

H. Asteman, R. Norling, J.‐E. Svensson, A. Nylund & L. Nyborg. (2002) Quantitative AES depth profiling of iron and chromium oxides in solid solution, (Cr 1− x Fe x ) 2 O 3 . Surface and Interface Analysis 34:1, pages 234-238.
Crossref

Pierre Bracconi & Lars Nyborg. (1998) Quantitative phase analysis and thickness measurement of surface-oxide layers in metal and alloy powders by the chemical-granular method. Applied Surface Science 133:1-2, pages 129-147.
Crossref

Tadashi FUKUDAYoshihisa OHASHINoriaki USUKIKazuhiro OGAWA & Koichi KOSHIRO. (1996) Surface Characteristics and Properties of Consolidated Material for Gas Atomized High Ni Alloy Powder. Tetsu-to-Hagane 82:7, pages 605-610.
Crossref

Pierre Bracconi & Geneviève Gasc. (1994) Surface characterization and reactivity of a nitrogen atomized 304L stainless steel powder. Metallurgical and Materials Transactions A 25:3, pages 509-520.
Crossref

G. Gasc & P. Bracconi. (1992) Magnetic susceptibility of an atomized 304L stainless steel powder: Particle size effect. Metallurgical Transactions A 23:10, pages 2917-2921.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Share icon
Back to Top

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Surface Analysis of Gas Atomized Ferritic Steel Powder

Articles from other publishers (24)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature