Emmanouil Stavroulakis, David Bowden, Sandeep Irukuvarghula, Alistair Garner, Ed Pickering, David Stewart & Michael Preuss. (2022) Characterisation of ferritic to austenitic steel functional grading via powder hot isostatic pressing. Materials Today Communications 31, pages 103442.
Crossref

Emmanouil Stavroulakis, Sandeep Irukuvarghula, Ed Pickering, David Stewart & Michael Preuss. (2022) Fundamental aspects of functional grading via powder hot isostatic pressing – Development of microstructure and diffusional processes. Materials & Design 215, pages 110437.
Crossref

M.J. Carrington, D.G. McCartney, P.H. Shipway & D.A. Stewart. (2022) Microstructure formation in the powder HIPed hardfacing alloy Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%). Materials Characterization 184, pages 111688.
Crossref

Langping Zhu, Yu Pan, Yanjun Liu, Xiangning Wang, Xiaofei Mo, Zhiyu Sun, Hai Nan, Xuanhui Qu & Xin Lu. (2021) Micro-mechanism and mechanical properties of solid-powder hot isostatic pressing diffusion-bonded Ti2AlNb alloy. Advanced Powder Technology 32:10, pages 3610-3623.
Crossref

S. Irukuvarghula, H. Hassanin, C. Cayron, M. Aristizabal, M.M. Attallah & M. Preuss. (2019) Effect of powder characteristics and oxygen content on modifications to the microstructural topology during hot isostatic pressing of an austenitic steel. Acta Materialia 172, pages 6-17.
Crossref

Tanaji Paul, Niraj Chawake, Ravi Sankar Kottada & Sandip P. Harimkar. (2018) Pressure controlled micro-viscous deformation assisted spark plasma sintering of Fe-based bulk amorphous alloy. Journal of Alloys and Compounds 738, pages 10-15.
Crossref

S. Irukuvarghula, H. Hassanin, C. Cayron, M.M. Attallah, D. Stewart & M. Preuss. (2017) Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing. Acta Materialia 133, pages 269-281.
Crossref

D. Jiao, Z.Q. Liu, Y.K. Zhu, Z.Y. Weng & Z.F. Zhang. (2016) Mechanical behavior of mother-of-pearl and pearl with flat and spherical laminations. Materials Science and Engineering: C 68, pages 9-17.
Crossref

N. Yodoshi, S. Ookawa, R. Yamada, A. Kawasaki & A. Makino. (2016) Temperature dependency of viscosity of Fe76Si9B10P5 supercooled liquid and hetero-amorphous structure. Journal of Alloys and Compounds 679, pages 164-168.
Crossref

Noriharu Yodoshi, Rui Yamada & Akira Kawasaki. (2016) Micro Viscous Flow Processing of Iron-based Metallic Glasses. Materia Japan 55:4, pages 152-159.
Crossref

N. Yodoshi, R. Yamada, A. Kawasaki & A. Makino. (2014) Micro viscous flow processing of Fe-based metallic glassy particles. Journal of Alloys and Compounds 615, pages S61-S66.
Crossref

R. Ritasalo, M.E. Cura, X.W. Liu, Y. Ge, T. Kosonen, U. Kanerva, O. Söderberg & S-P. Hannula. (2013) Microstructural and mechanical characteristics of Cu–Cu2O composites compacted with pulsed electric current sintering and hot isostatic pressing. Composites Part A: Applied Science and Manufacturing 45, pages 61-69.
Crossref

N. Yodoshi, R. Yamada, A. Kawasaki & R. Watanabe. (2012) Evaluation of viscosity for Fe-based metallic glass in the supercooled liquid region by a single-particle compressive test. Scripta Materialia 67:12, pages 971-974.
Crossref

Victor SamarovVassily Goloveshkin. 2010. Metals Process Simulation. Metals Process Simulation 335 342 .

Ryuzo Watanabe, Hisamichi Kimura, Hidemi Kato & Akihisa Inoue. (2007) Hot Pressing Consolidation Mechanisms of Bulk Metallic Glass Powders. Journal of the Japan Society of Powder and Powder Metallurgy 54:11, pages 761-767.
Crossref

H. V. Atkinson & S. Davies. (2000) Fundamental aspects of hot isostatic pressing: An overview. Metallurgical and Materials Transactions A 31:12, pages 2981-3000.
Crossref

S.C. Liao, W.E. Mayo & K.D. Pae. (1997) Theory of high pressure/low temperature sintering of bulk nanocrystalline TiO2. Acta Materialia 45:10, pages 4027-4040.
Crossref

H.D. Ramsbottom & D.P. Hampshire. (1997) Improved critical current density and irreversibility line in HIP'ed Chevrel phase superconductor PbMo6S8. Physica C: Superconductivity 274:3-4, pages 295-303.
Crossref

E. Pagounis, M. Talvitie & V.K. Lindroos. (1996) Consolidation behavior of a particle reinforced metal matrix composite during HIPing. Materials Research Bulletin 31:10, pages 1277-1285.
Crossref

R. Suryanarayanan, S.M.L. Sastry & K.L. Jerina. (1994) Consolidation of molybdenum disilicide based materials by hot isostatic pressing (HIP): comparison with models. Acta Metallurgica et Materialia 42:11, pages 3741-3750.
Crossref

Yong-Mei Liu, H.N.G. Wadley & J.M. Duva. (1994) Densification of porous materials by power-law creep. Acta Metallurgica et Materialia 42:7, pages 2247-2260.
Crossref

L.Z. Zhuang, I. Majewska-Glabus, R. Vetter, J. Duszczyk & L. Buekenhout. 1994. Hot Isostatic Pressing '93. Hot Isostatic Pressing '93 157 167 .

A. A. Frolov, O. B. Sadykhov & G. Ya. Gun. (1991) A system of designing technological parameters of hot isostatic compacting powder materials. II. Description of the models of ?lower? level. Method of determining rheological coefficients. A general mechanism of operation of the system. Soviet Powder Metallurgy and Metal Ceramics 30:8, pages 626-630.
Crossref

B.W. Choi, Y.G. Deng, C. McCullough, B. Paden & R. Mehrabian. (1990) Densification of rapidly solidified titanium aluminide powders?I. Comparison of experiments to hiping models. Acta Metallurgica et Materialia 38:11, pages 2225-2243.
Crossref

Ryuzo Watanabe, Akira Kawasaki & Masafumi Miyajima. (1990) Hot Powder Vehicle Compaction of an Atomized Stainless Steel Powder. Materials Transactions, JIM 31:2, pages 152-157.
Crossref

Elazar Y. Gutmanas. (1990) Materials with fine microstructures by advanced powder metallurgy. Progress in Materials Science 34:4, pages 261-366.
Crossref

R. Laag, W. A. Kaysser, R. Maurer & G. Petzow. 1989. Science of Sintering. Science of Sintering 295 309 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Share icon
Back to Top

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Microstructural Development and Densification During Hipping of Ceramics and Metals

Articles from other publishers (27)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature