Citations (20)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Ilaria Cristofolini, Alberto Molinari, Marco Zago, Onur Utku Uçak, Bruno Vicenzi, Mark James Dougan, Markus Schneider, Preben Hedegard Pedersen, Johanna Bolitschek & Juergen Voglhuber. (2022) Development of a new model describing the anisotropic dimensional change on sintering. Powder Metallurgy 65:2, pages 89-100.
Read now
Read now
A Molinari, C Menapace, E Torresani, I Cristofolini & M Larsson. (2013) Working hypothesis for origin of anisotropic sintering shrinkage caused by prior uniaxial cold compaction. Powder Metallurgy 56:3, pages 189-195.
Read now
Read now
A. Raja Annamalai, F. Nekatibeb, A. Upadhyaya & D. K. Agrawal. (2013) Effect of heating mode on sinterability of carbonyl iron compacts. Materials Research Innovations 17:1, pages 10-16.
Read now
Read now
Articles from other publishers (17)
Milad Hojati, Herbert Danninger & Christian Gierl-Mayer. (2021) Mechanical and Physical Properties of Differently Alloyed Sintered Steels as a Function of the Sintering Temperature. Metals 12:1, pages 13.
Crossref
Crossref
Marco Zago, Mats Larsson & Ilaria Cristofolini. 2020. Design Tools and Methods in Industrial Engineering. Design Tools and Methods in Industrial Engineering
257
267
.
I. Cristofolini, N. Corsentino, M. Larsson & A. Molinari. (2016) Analytical Model of the Anisotropic Dimensional Change on Sintering of Ferrous PM Parts. Powder Metallurgy Progress 16:1, pages 27-39.
Crossref
Crossref
Abdul Malik Tahir, Amer Malik & Gustav Amberg. (2016) Modeling of the primary rearrangement stage of liquid phase sintering. Modelling and Simulation in Materials Science and Engineering 24:7, pages 075009.
Crossref
Crossref
Sanjay S. Rathore, Milind M. Salve & Vikram V. Dabhade. (2015) Effect of molybdenum addition on the mechanical properties of sinter-forged Fe–Cu–C alloys. Journal of Alloys and Compounds 649, pages 988-995.
Crossref
Crossref
Ilaria Cristofolini, Nicolò Corsentino, Alberto Molinari & Mats Larsson. (2014) Study of the influence of material and geometry on the anisotropy of dimensional change on sintering of Powder Metallurgy parts. International Journal of Precision Engineering and Manufacturing 15:9, pages 1865-1873.
Crossref
Crossref
RAJA ANNAMALAI, ANISH UPADHYAYA & DINESH AGRAWAL. (2013) An investigation on microwave sintering of Fe, Fe–Cu and Fe–Cu–C alloys. Bulletin of Materials Science 36:3, pages 447-456.
Crossref
Crossref
I. Cristofolini, C. Menapace, M. Cazzolli, A. Rao, W. Pahl & A. Molinari. (2012) The effect of anisotropic dimensional change on the precision of steel parts produced by powder metallurgy. Journal of Materials Processing Technology 212:7, pages 1513-1519.
Crossref
Crossref
Shuangyu Liu, Hong Zhang & Jiandong Hu. (2011) Effect of carbusintering on densification behavior and mechanical properties of Fe–2%Ni–x%Cu alloys. Materials & Design 32:7, pages 3686-3691.
Crossref
Crossref
Felege Nekatibeb, A. Raja Annamalai & Anish Upadhyaya. (2011) Effect of copper and graphite addition on sinterability of iron. Transactions of the Indian Institute of Metals 64:1-2, pages 81-84.
Crossref
Crossref
S.H. Huo, M. Qian, G.B. Schaffer & E. Crossin. 2011. Fundamentals of Aluminium Metallurgy. Fundamentals of Aluminium Metallurgy
655
701
.
Rosa Di Maggio, Gloria Ischia, Mauro Bortolotti, Federico Rossi & Alberto Molinari. (2007) The microstructure and mechanical properties of Fe–Cu materials fabricated by pressure-less-shaping of nanocrystalline powders. Journal of Materials Science 42:22, pages 9284-9292.
Crossref
Crossref
Wen-Fung Wang. (2005) Effect of alloying elements and processing factors on the microstructure and hardness of sintered and induction-hardened Fe–C–Cu alloys. Materials Science and Engineering: A 402:1-2, pages 92-97.
Crossref
Crossref
Youn-Che Kim & Shoji Goto. (2005) The Effect of Cu Addition Method on Dimensional Change of Fe-Cu Sintered Compacts. Journal of the Japan Society of Powder and Powder Metallurgy 52:2, pages 89-96.
Crossref
Crossref
Zongyin Zhang, Rolf Sandström & Lingna Wang. (2004) Modelling of swelling of Fe–Cu compacts sintered at temperatures above the copper melting point. Journal of Materials Processing Technology 152:2, pages 131-135.
Crossref
Crossref
T Pieczonka, W.A Kaysser & G Petzow. (1999) Transient liquid phase sintering of Fe–Cu–Ti compacts. Journal of Materials Processing Technology 92-93, pages 21-24.
Crossref
Crossref
Ping Shen, Jiandong Hu, Zuoxing Guo & Qingfeng Guan. (1999) A study on laser sintering of Fe-Cu powder compacts. Metallurgical and Materials Transactions A 30:8, pages 2229-2235.
Crossref
Crossref