Isadora Schramm Deschamps, Daniel dos Santos Avila, Enzo Vanzuita Piazera, Robinson Carlos Dudley Cruz, Claudio Aguilar & Aloisio Nelmo Klein. (2022) Design of In Situ Metal Matrix Composites Produced by Powder Metallurgy—A Critical Review. Metals 12:12, pages 2073.
Crossref

Jelena Stašić & Dušan Božić. (2020) The effect of in-situ formed TiB 2 particles on microstructural and mechanical properties of laser melted copper alloy . International Journal of Materials Research 111:2, pages 153-159.
Crossref

Pallav Kant, Robin B. J. KoldeweijKirsten HarthMichiel A. J. van Limbeek & Detlef Lohse. (2020) Fast-freezing kinetics inside a droplet impacting on a cold surface. Proceedings of the National Academy of Sciences 117:6, pages 2788-2794.
Crossref

J. Stašić & D. Božić. (2018) Obtaining of reinforced Cu-Ti, Cu-Ti-TiB2 foils through green compact laser sintering. Journal of Alloys and Compounds 762, pages 231-236.
Crossref

Mingxiang Liu, Zhenshan Cui, Xiaoqing Shang & Shan Zhou. (2018) Comparative Study on the Microstructure Characteristics and Enhanced Mechanical Properties of Spray Formed GCr15 Bearing Steel. steel research international 89:6, pages 1700529.
Crossref

T. S. Srivatsan, Yaojun Lin, Fei Chen, K. Manigandan & Enrique J. Lavernia. 2018. Metal-Matrix Composites Innovations, Advances and Applications. Metal-Matrix Composites Innovations, Advances and Applications 149 182 .

Guilherme Zepon, Nils Ellendt, Volker Uhlenwinkel & Hani Henein. 2017. Metal Sprays and Spray Deposition. Metal Sprays and Spray Deposition 297 348 .

B. Li, Y. Lin, F. Chen, L. Zhang & E.J. Lavernia. 2016. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.

D. Božić, J. Stašić, J. Ružić, M. Vilotijević & V. Rajković. (2011) Synthesis and properties of a Cu–Ti–TiB2 composite hardened by multiple mechanisms. Materials Science and Engineering: A 528:28, pages 8139-8144.
Crossref

Chengsong Cui, Alwin Schulz, Volker Uhlenwinkel & Hans-Werner Zoch. (2011) Spray-Formed Stainless Steel Matrix Composites with Co-Injected Carbide Particles. Metallurgical and Materials Transactions A 42:8, pages 2442-2455.
Crossref

D BOZIC, J STASIC, B DIMCIC, M VILOTIJEVIC & V RAJKOVIC. (2011) Multiple strengthening mechanisms in nanoparticle-reinforced copper matrix composites. Bulletin of Materials Science 34:2, pages 217-226.
Crossref

C. Cui, A. Schulz, V. Uhlenwinkel, F. Zobel & H.-W. Zoch. (2010) Spray forming of stainless steel matrix composites with injection of hard particulates. Materialwissenschaft und Werkstofftechnik 41:7, pages 524-531.
Crossref

Oleg D. Neikov,. 2009. Handbook of Non-Ferrous Metal Powders. Handbook of Non-Ferrous Metal Powders 284 313 .

K. Raju, S. N. Ojha & A. P. Harsha. (2008) Spray forming of aluminum alloys and its composites: an overview. Journal of Materials Science 43:8, pages 2509-2521.
Crossref

V. C. Srivastava & S. N. Ojha. (2005) Microstructure and electrical conductivity of Al-SiCp composites produced by spray forming process. Bulletin of Materials Science 28:2, pages 125-130.
Crossref

Z GAN & H NG. (2004) Experiments and inelastic finite element analyses of plasma sprayed graded coatings under cyclic thermal shock. Materials Science and Engineering A 385:1-2, pages 314-324.
Crossref

B Yang, F Wang & J.S Zhang. (2003) Microstructural characterization of in situ TiC/Al and TiC/Al–20Si–5Fe–3Cu–1Mg composites prepared by spray deposition. Acta Materialia 51:17, pages 4977-4989.
Crossref

Jens Ziesenis & Klaus Bauckhage. (2003) Spray Forming: Controlling the Atomization Result with Regard to Particle Properties. Particle & Particle Systems Characterization 20:4, pages 290-297.
Crossref

E.J. Lavernia & J.-P. Delplanque. 2001. Encyclopedia of Materials: Science and Technology. Encyclopedia of Materials: Science and Technology 8771 8775 .

Jongsang Lee, J.Y. Jung, Eon-Sik Lee, W.J. Park, S. Ahn & Nack J. Kim. (2000) Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming. Materials Science and Engineering: A 277:1-2, pages 274-283.
Crossref

M Gupta & C.Y Loke. (2000) Synthesis of free standing, one dimensional, Al?SiC based functionally gradient materials using gradient slurry disintegration and deposition. Materials Science and Engineering: A 276:1-2, pages 210-217.
Crossref

BING LI & ENRIQUE J. LAVERNIA. 2000. Comprehensive Composite Materials. Comprehensive Composite Materials 617 653 .

M. Gupta & S. Ling. (1999) Microstructure and mechanical properties of hypo/hyper-eutectic Al–Si alloys synthesized using a near-net shape forming technique. Journal of Alloys and Compounds 287:1-2, pages 284-294.
Crossref

Jongsang Lee, Eon-Sik Lee, W. J. Park, J. Y. Jung, S. Ahn & Nack J. Kim. (1999) Microstructural evolution during reactive spray forming of dispersion strengthened Cu alloy. Metals and Materials 5:2, pages 141-147.
Crossref

M. Gupta, M.O. Lai & N.S. Herng. (1999) Effect of Particulate Size on the Microstructural Evolution, Aging Behavior and Mechanical Properties of Al-4.5 Cu/SiC Composites. High Temperature Materials and Processes 18:3.
Crossref

Bing Li & Enrique J. Lavernia. 1999. Non-equilibrium Processing of Materials. Non-equilibrium Processing of Materials 153 193 .

M. Gupta, M.O. Lai & M.S. Boon. (1998) Regarding the near net shape synthesis of an antifriction composite with improved microstructure and yield strength. Materials Research Bulletin 33:9, pages 1387-1400.
Crossref

Howard Gabel & Ralph Tapphorn. (1997) Solid-state spray forming of aluminum near-net shapes. JOM 49:8, pages 31-33.
Crossref

T. M. Yue & V. Dai. (1996) Wire electrical discharge machining of Al<SUB>2</SUB>O<SUB>3</SUB> particle and short fibre reinforced aluminium based composites. Materials Science and Technology 12:10, pages 831-836.
Crossref

P.S. Grant. (1995) Spray forming. Progress in Materials Science 39:4-5, pages 497-545.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Share icon
Back to Top

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Spray Forming of Metal Matrix Composites

Articles from other publishers (30)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature