G. Thavanayagam & J.E. Swan. (2018) Aqueous debinding of polyvinyl butyral based binder system for titanium metal injection moulding. Powder Technology 326, pages 402-410.
Crossref

Muhammad Dilawer Hayat, Tao Li, Guian Wen & Peng Cao. (2015) Suitability of PEG/PMMA-based metal injection moulding feedstock: an experimental study. The International Journal of Advanced Manufacturing Technology 80:9-12, pages 1665-1671.
Crossref

Hassan Norita, Sahrim Ahmad, Norhamidi Muhamad, Mohd Afian OmarNoor Azlina Hassan. (2015) The Effects of Various TPNR Binder Compositions on Feedstock Preparation for MIM Process. Advanced Materials Research 1115, pages 304-307.
Crossref

Hassan Norita, Sahrim Ahmad, N. Muhamad, Mohd Afian OmarNoor Azlina Hassan. (2015) Morphology and Mechanical Properties of MIM Feedstock Using TPNR Backbone Binder. Advanced Materials Research 1115, pages 279-282.
Crossref

Javad Rajabi, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz & Muhammad Rafi Raza. (2014) The effect of nano-sized stainless steel powder addition on mechanical and physical properties of micropowder injection molded part. Materials & Design 63, pages 223-232.
Crossref

Nor Amalina Nordin, Izyan Rabzi, Nor‘aini Wahab, Aidah Jumahat & Muhammad Hussain Ismail. (2014) Viscosity Analysis of Copper Powder Mixed with Palm Stearin Based Binder. Applied Mechanics and Materials 660, pages 259-264.
Crossref

Guian Wen, Peng Cao, Brian Gabbitas, Deliang Zhang & Neil Edmonds. (2012) Development and Design of Binder Systems for Titanium Metal Injection Molding: An Overview. Metallurgical and Materials Transactions A 44:3, pages 1530-1547.
Crossref

A.T. Sidambe, I.A. Figueroa, H.G.C. Hamilton & I. Todd. (2012) Metal injection moulding of CP-Ti components for biomedical applications. Journal of Materials Processing Technology 212:7, pages 1591-1597.
Crossref

J. Surawatthana, Nutthita Chuankrerkkul & Wantanee Buggakupta. (2012) Properties of Porous Alumina Fabricated by Ceramic Injection Moulding Using Environmentally Friendly Binder. Advanced Materials Research 506, pages 238-241.
Crossref

Nutthita Chuankrerkkul & Parinya Chakartnarodom. (2012) Fabrication of Injection Moulded 304L Stainless Steels Reinforced with Tungsten Carbide Particles. Materials Science Forum 706-709, pages 638-642.
Crossref

Hooman Abolhasani & Norhamidi Muhamad. (2011) Debinding Process of a Starch-Based Binder in Metal Injection Moulding. Advanced Materials Research 264-265, pages 248-253.
Crossref

Hao He, Yi Min Li & Da Peng Li. (2011) Effect of Sintering Temperature and Atmosphere on Corrosion Behavior of MIM 316L Stainless Steel. Advanced Materials Research 239-242, pages 132-136.
Crossref

H. Abolhasani & N. Muhamad. (2010) A new starch-based binder for metal injection molding. Journal of Materials Processing Technology 210:6-7, pages 961-968.
Crossref

Nutthita Chuankrerkkul, Hywel A. Davies & Peter F. Messer. (2007) Application of PEG/PMMA Binder for Powder Injection Moulding of Hardmetals. Materials Science Forum 561-565, pages 953-956.
Crossref

Yan Gao, Kang Ming Huang, Zhen Kun Fan & Zhi Peng Xie. (2007) Injection Molding of Zirconia Ceramics Using Water-Soluble Binder. Key Engineering Materials 336-338, pages 1017-1020.
Crossref

Shi-Bo Li & Jian-Xin Xie. (2007) Fabrication of thin-walled 316L stainless steel seamless pipes by extrusion technology. Journal of Materials Processing Technology 183:1, pages 57-61.
Crossref

H. Özkan Gülsoy & Çetin Karataş. (2007) Development of poly(2-ethyl-2-oxaline) based water-soluble binder for injection molding of stainless steel powder. Materials & Design 28:9, pages 2488-2491.
Crossref

Minseok Song, Min Soo Park, Jin Kon Kim, Il Bum Cho, Kyung Ho Kim, Hwan Jin Sung & Sangho Ahn. (2005) Water-soluble binder with high flexural modulus for powder injection molding. Journal of Materials Science 40:5, pages 1105-1109.
Crossref

Song-lin Li, Bai-yun Huang, Yi-min Li, Shu-quan Liang, Du-xin Li, Jin-lian Fan & Feng Jiang. (2003) Effects of sintering atmosphere on the microstructure and mechanical property of sintered 316L stainless steel. Journal of Central South University of Technology 10:1, pages 1-6.
Crossref

J.S Ridgway, J.B Hull & C.R Gentle. (2003) A PRIME approach for the moulding of conduit ceramic parts. Journal of Materials Processing Technology 133:1-2, pages 181-188.
Crossref

B. Levenfeld, A. Várez & J. M. Torralba. (2002) Effect of residual carbon on the sintering process of M2 high speed steel parts obtained by a modified metal injection molding process. Metallurgical and Materials Transactions A 33:6, pages 1843-1851.
Crossref

M.A Omar, H.A Davies, P.F Messer & B Ellis. (2001) The influence of PMMA content on the properties of 316L stainless steel MIM compact. Journal of Materials Processing Technology 113:1-3, pages 477-481.
Crossref

Z.Y. Liu, N.H. Loh, S.B. Tor, K.A. Khor, Y. Murakoshi & R. Maeda. (2001) Binder system for micropowder injection molding. Materials Letters 48:1, pages 31-38.
Crossref

N.H Loh, S.B Tor & K.A Khor. (2001) Production of metal matrix composite part by powder injection molding. Journal of Materials Processing Technology 108:3, pages 398-407.
Crossref

J.M. Torralba, J.M. Ruiz-Rom?n, L.E.G. Cambronero, J.M. Ruiz-Prieto & M. Guti?rrez-Stampa. (1997) P/M high speed steels obtained by metal injection moulding. Journal of Materials Processing Technology 64:1-3, pages 387-395.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Injection Moulding of 316L Stainless Steel Powder Using Novel Binder System

Articles from other publishers (26)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature