65
Views
29
CrossRef citations to date
0
Altmetric
Articles

Surface Reactions During Water Atomisation and Sintering of Austenitic Stainless Steel Powder

Pages 120-130 | Published online: 19 Jul 2013

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (7)

Christian Gierl-Mayer. (2020) Reactions between ferrous powder compacts and atmospheres during sintering – an overview. Powder Metallurgy 63:4, pages 237-253.
Read now
Biao Zhang, Fang Yang, Qian Qin, Tianxing Lu, Haixia Sun, Shengzeng Lin, Cunguang Chen & Zhimeng Guo. (2020) Characterisation of powder metallurgy H13 steels prepared from water atomised powders. Powder Metallurgy 63:1, pages 9-18.
Read now
Y Hedberg, M Norell, J Hedberg, P Szakálos, P Linhardt & I Odnevall Wallinder. (2013) Surface characterisation of fine inert gas and water atomised stainless steel 316L powders: formation of thermodynamically unstable surface oxide phases. Powder Metallurgy 56:2, pages 158-163.
Read now
P. Jackson, C. C. Degnan & J. V. Wood. (2002) Properties of reacto-thermitically sintered stainless steel. Materials Science and Technology 18:11, pages 1341-1346.
Read now
M. Norell, L. Nyborg & M. Friesel. (1998) Segregants at Prior Particle Boundaries in Powder Metallurgical Martensitic Stainless Steel. Powder Metallurgy 41:1, pages 31-39.
Read now
M.H Ghoncheh, A. Shahriari, N. Birbilis & M. Mohammadi. Process-microstructure-corrosion of additively manufactured steels: a review. Critical Reviews in Solid State and Materials Sciences 0:0, pages 1-111.
Read now

Articles from other publishers (22)

Marius Hilzenthaler, Florian Scherm, Haneen Daoud & Uwe Glatzel. (2022) In-situ decarburization and deoxidation during laser powder bed fusion of water-atomized steel C35. Powder Technology 412, pages 117973.
Crossref
Daniel Huber, Philipp Stich & Alfons Fischer. (2021) Heat Treatment of 17–4 PH Stainless Steel Produced by Binder Jet Additive Manufacturing (BJAM) from N2-Atomized Powder. Progress in Additive Manufacturing 7:2, pages 187-199.
Crossref
Qiang Zhang, Liang Zheng, Hua Yuan, Zhou Li, Guoqing Zhang & Jianxin Xie. (2021) Effects of composition and particle size on the surface state and degassing behavior of nickel-based superalloy powders. Applied Surface Science 556, pages 149793.
Crossref
Daniel Huber & Alfons Fischer. 2021. Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021. Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021 53 66 .
Dmitri Riabov, Masoud Rashidi, Eduard Hryha & Sven Bengtsson. (2020) Effect of the powder feedstock on the oxide dispersion strengthening of 316L stainless steel produced by laser powder bed fusion. Materials Characterization 169, pages 110582.
Crossref
Dmitri Riabov, Eduard Hryha, Masoud Rashidi, Sven Bengtsson & Lars Nyborg. (2020) Effect of atomization on surface oxide composition in 316L stainless steel powders for additive manufacturing. Surface and Interface Analysis 52:11, pages 694-706.
Crossref
Christine Baumgart, Christian Weigelt, Marco Wendler, Ivan Saenko, Christos G. Aneziris, Olena Volkova & Lutz Krüger. (2018) Challenges in Pressureless Sintering of Interstitially Alloyed TRIP Steel and Resulting Mechanical Properties. Advanced Engineering Materials 21:5, pages 1800700.
Crossref
J.A. Gonzalez, J. Mireles, S.W. Stafford, M.A. Perez, C.A. Terrazas & R.B. Wicker. (2019) Characterization of Inconel 625 fabricated using powder-bed-based additive manufacturing technologies. Journal of Materials Processing Technology 264, pages 200-210.
Crossref
Ryo Nakabayashi & Tomonari Fujita. (2018) Identification of chemical form of stable carbon released from type 304L and 316L stainless-steel powders in alkaline and acidic solutions under low-oxygen conditions. Radiocarbon 60:6, pages 1691-1710.
Crossref
Yolanda S. Hedberg & Inger Odnevall Wallinder. (2016) Metal release from stainless steel in biological environments: A review. Biointerphases 11:1.
Crossref
Jin Man Jang, Wonsik Lee, Se-Hyun Ko, Chulwoong Han & Hanshin Choi. (2015) Oxide Formation In Metal Injection Molding Of 316L Stainless Steel. Archives of Metallurgy and Materials 60:2.
Crossref
Hea-Min Shin & Kyeong-Ho Baik. (2014) Hydrogen Reduction Behavior of Oxide Scale in Water-atomized Iron Powder. Journal of Korean Powder Metallurgy Institute 21:6, pages 422-428.
Crossref
Won Sik Lee, Jin Man Jang, Berm Ha Cha & Se Hyun Ko. (2013) Fabrication of High Aspect Ratio Microscale Rod Arrays Using Metal Injection Molding. Advanced Materials Research 716, pages 430-433.
Crossref
Y. Hedberg, M. Norell, P. Linhardt, H. Bergqvist & I. Odnevall Wallinder. (2012) Influence of Surface Oxide Characteristics and Speciation on Corrosion, Electrochemical Properties and Metal Release of Atomized 316L Stainless Steel Powders. International Journal of Electrochemical Science 7:12, pages 11655-11677.
Crossref
Zhe Zhang, Muhammad Rifai, Hiroshi Kobayakawa, Octav Paul Ciuca, Hiroshi Fujiwara, Akira Ueno & Kei Ameyama. (2012) Effects of SiO<sub>2</sub> Particles on Deformation of Mechanically Milled Water-Atomized SUS304L Powder Compacts. MATERIALS TRANSACTIONS 53:1, pages 109-115.
Crossref
Che-Wei Chang, Po-Han Chen & Kuen-Shyang Hwang. (2010) Enhanced Mechanical Properties of Injection Molded 17-4PH Stainless Steel through Reduction of Silica Particles by Graphite Additions. MATERIALS TRANSACTIONS 51:12, pages 2243-2250.
Crossref
Pavan Suri, Ryan P. Koseski & Randall M. German. (2005) Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering. Materials Science and Engineering: A 402:1-2, pages 341-348.
Crossref
Ryan P. Koseski, Pavan Suri, Nicholas B. Earhardt, Randall M. German & Young-Sam Kwon. (2005) Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering. Materials Science and Engineering: A 390:1-2, pages 171-177.
Crossref
Andrew J. Pinkerton & Lin Li. (2004) The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication. Thin Solid Films 453-454, pages 600-605.
Crossref
A J Pinkerton & L Li. (2005) Rapid prototyping using direct laser deposition—the effect of powder atomization type and flowrate. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217:6, pages 741-752.
Crossref
Helena Skoglund, Maria Knutson Wedel & Birger Karlsson. (2003) The role of oxygen in powder processing of FeAl. Intermetallics 11:5, pages 475-482.
Crossref
Pierre Bracconi & Lars Nyborg. (1998) Quantitative phase analysis and thickness measurement of surface-oxide layers in metal and alloy powders by the chemical-granular method. Applied Surface Science 133:1-2, pages 129-147.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.