Citations (41)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (7)
Silani Sahoo, Bharat Bhushan Jha & Animesh Mandal. (2021) Powder metallurgy processed TiB2-reinforced steel matrix composites: a review. Materials Science and Technology 37:14, pages 1153-1173.
Read now
Read now
Wu Xiao-Yan, Shen Long-Zhang, Peng Tai-ping & Liu Yong. (2020) Effect of Extrusion Speed on the Microstructures and Density of Compaction Efficiency in Powder Pressing. Integrated Ferroelectrics 208:1, pages 40-49.
Read now
Read now
Biao Zhang, Fang Yang, Qian Qin, Tianxing Lu, Haixia Sun, Shengzeng Lin, Cunguang Chen & Zhimeng Guo. (2020) Characterisation of powder metallurgy H13 steels prepared from water atomised powders. Powder Metallurgy 63:1, pages 9-18.
Read now
Read now
Y.M. Wang, C.H. Zhang, Y.P. Zong & H.P. Yang. (2013) Experimental and simulation studies of particle size effects on tensile deformation behavior of iron matrix composites. Advanced Composite Materials 22:5, pages 299-310.
Read now
Read now
M. Karlsohn, S. Weber, Alavi S. R. Zaree, S. Müller, W. Theisen, W. Reimers & A. R. Pyzalla. (2008) Manufacturing, microstructure and wear resistance of novel hot extruded Fe based metal matrix composites. Powder Metallurgy 51:1, pages 31-37.
Read now
Read now
S. Weber & W. Theisen. (2006) Optimised sintering route for cold work tool steels. Powder Metallurgy 49:4, pages 355-362.
Read now
Read now
Karabi Das, T. K. Bandyopadhyay, S. Ghosh & A. B. Chattopadhyay. (2004) Development of a Cutting Tool from an Industrial Waste. Materials and Manufacturing Processes 19:2, pages 313-328.
Read now
Read now
Articles from other publishers (34)
Gerald Ressel, Josef Pörnbacher, Harald Leitner & Stefan Marsoner. (2022) Interface Modification as a Function of TiC Particle Size in a Solid‐State Consolidated TiC–Steel Metal–Matrix Composite. steel research international 94:4.
Crossref
Crossref
Lei Guo, Yang Yang, Yinuo Du, Hao Sun & Zhancheng Guo. (2022) In-situ formation of titanium carbide in copper-titanium-carbon system: A review. Powder Technology 403, pages 117389.
Crossref
Crossref
Yongjian Fang, Min-Kyeom Kim, Yali Zhang, Ziyang Duan, Quan Yuan & Jonghwan Suhr. (2022) Particulate-reinforced iron-based metal matrix composites fabricated by selective laser melting: A systematic review. Journal of Manufacturing Processes 74, pages 592-639.
Crossref
Crossref
Wenquan Wang, Ming Du, Xinge Zhang, Chengqun Luan & Yingtao Tian. (2021) Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process. Materials 14:13, pages 3700.
Crossref
Crossref
Guoping Li, Haojun Zhou, Jing Lu, Ning Wu, Yinghai Lyu & Fenghua Luo. (2020) TiC–High Mn Steel‐Bonded Cermets with Improved Strength and Impact Toughness. steel research international 92:3, pages 2000400.
Crossref
Crossref
Hongxia Liu, Weihao Song, Qian Xu, Wen Ma & Yu Bai. (2020) Electrosynthesis of Iron-based ZrC Nanocomposite Powder in Molten Salt. International Journal of Electrochemical Science 15:10, pages 9759-9768.
Crossref
Crossref
F. Deirmina & M. Pellizzari. (2020) Mechanical properties and tempering resistance of an ultrafine grained Tool Steel-PSZ composite fabricated by high energy mechanical milling and spark plasma sintering. Materials Science and Engineering: A 786, pages 139428.
Crossref
Crossref
Josef Pörnbacher, Harald Leitner, Paul Angerer, Tomasz Wojcik, Stefan Marsoner & Gerald Ressel. (2019) TiC-(Ti,M)C core-rim structures in solid-state manufactured steel-based MMCs. Materials Characterization 156, pages 109880.
Crossref
Crossref
C. García, F. Martín, G. Herranz, C. Berges & A. Romero. (2018) Effect of adding carbides on dry sliding wear behaviour of steel matrix composites processed by metal injection moulding. Wear 414-415, pages 182-193.
Crossref
Crossref
Faraz Deirmina, Bandar AlMangour, Dariusz Grzesiak & Massimo Pellizzari. (2018) H13–partially stabilized zirconia nanocomposites fabricated by high-energy mechanical milling and selective laser melting. Materials & Design 146, pages 286-297.
Crossref
Crossref
Hongmei Li, Qiushi Song, Qian Xu, Ying Chen, Liang Xu & Tiannan Man. (2017) Electrochemical Synthesis of Core–Shell-Structured NbC–Fe Composite Powder for Enforcement in Low-Carbon Steel. Materials 10:11, pages 1257.
Crossref
Crossref
Faraz Deirmina & Massimo Pellizzari. (2017) Production and characterization of a tool steel-PSZ composite by mechanical alloying and spark plasma sintering. Journal of Alloys and Compounds 709, pages 742-751.
Crossref
Crossref
Qiushi Song, Qian Xu, Liang Xu, Zhiqiang Ning, Taiping Lou, Hongwei Xie, Yang Qi & Kai Yu. (2017) Synthesis of Ni-TiC composite powder electrochemically in molten chlorides. Journal of Alloys and Compounds 690, pages 116-122.
Crossref
Crossref
C. Garc?a, A. Romero, G. Herranz, Y. Blanco & F. Martin. (2016) Effect of vanadium carbide on dry sliding wear behavior of powder metallurgy AISI M2 high speed steel processed by concentrated solar energy. Materials Characterization 121, pages 175-186.
Crossref
Crossref
Qiushi Song, Qian Xu, Renyi Ding, Jingchun Meng, Zhiqiang Ning, Taiping Lou, Yang Qi & Kai Yu. (2015) Electrochemical Fabrication of Multicore-Shell Ni-TaC Composite Particles in Molten Salt. Journal of The Electrochemical Society 163:3, pages E49-E53.
Crossref
Crossref
Sun Lin, Song Qiushi, Xu Qian, Ning Zhiqiang, Lu Xionggang & Fray Derek. (2015) The electrochemical synthesis of TiC reinforced Fe based composite powder from titanium-rich slag. New Journal of Chemistry 39:6, pages 4391-4397.
Crossref
Crossref
Ravi Kant, Ashish Selokar, Vijaya Agarwala & U. Prakash. (2014) The Influence of Carbon Addition on Microstructure and Mechanical Properties of Fe-22.0Al-5.0Ti Alloy. Advanced Materials Research 1043, pages 17-21.
Crossref
Crossref
G. Herranz, A. Romero, V. de Castro & G.P. Rodríguez. (2014) Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering. Materials & Design (1980-2015) 54, pages 934-946.
Crossref
Crossref
M. Pellizzari, A. Fedrizzi & M. Zadra. (2011) Spark Plasma co-Sintering of hot work and high speed steel powders for fabrication of a novel tool steel with composite microstructure. Powder Technology 214:3, pages 292-299.
Crossref
Crossref
Luigi NicolaisGabriele Salvago & Massimiliano Bestetti. 2011. Wiley Encyclopedia of Composites. Wiley Encyclopedia of Composites
1
13
.
J. K. Chen, H. J. Chiu, C. Liang, B. S. Yu & S. H. Chang. (2010) Effects of Sintering Processes on Composite Tool Steels Containing Self-synthesized TiC. ISIJ International 50:10, pages 1453-1459.
Crossref
Crossref
S. Weber, W. Theisen, F. Castro & A. Pyzalla. (2009) Influence of gas atmosphere and hard particle addition on the sintering behavior of high alloyed PM cold work tool steels. Materials Science and Engineering: A 515:1-2, pages 175-182.
Crossref
Crossref
S. O. Yilmaz & M. Ozenbas. (2009) TiB2-reinforced composite coating by gas tungsten arc welding. Journal of Materials Science 44:12, pages 3273-3284.
Crossref
Crossref
Jhewn-Kuang Chen, Tzu-Piao Tang, Sen-Fu Chan & Shih-Hsien Chang. (2008) Effects of Particle Size on Mechanical Properties of a TiC Containing Tool Steel by Hot Isostatic Press. MATERIALS TRANSACTIONS 49:3, pages 624-628.
Crossref
Crossref
Sanna Ala-Kleme, Päivi Kivikytö-Reponen, Jari Liimatainen, Jussi Hellman & Simo-Pekka Hannula. (2007) Abrasive wear properties of tool steel matrix composites in rubber wheel abrasion test and laboratory cone crusher experiments. Wear 263:1-6, pages 180-187.
Crossref
Crossref
S. Weber & W. Theisen. (2007) Sintering of High Wear Resistant Metal Matrix Composites. Advanced Engineering Materials 9:3, pages 165-170.
Crossref
Crossref
T.K. Bandyopadhyay & Karabi Das. (2006) Processing and characterization of ZrC-reinforced steel-based composites. Journal of Materials Processing Technology 178:1-3, pages 335-341.
Crossref
Crossref
Animesh Anal, T.K. Bandyopadhyay & Karabi Das. (2006) Synthesis and characterization of TiB2-reinforced iron-based composites. Journal of Materials Processing Technology 172:1, pages 70-76.
Crossref
Crossref
K. Das, T. K. Bandyopadhyay & S. Chatterjee. (2005) Synthesis and characterization of austenitic Steel matrix composite reinforced with in-situ TiC particles. Journal of Materials Science 40:18, pages 5007-5010.
Crossref
Crossref
K. Das & T.K. Bandyopadhyay. (2004) Effect of form of carbon on the microstructure of in situ synthesized TiC-reinforced iron-based composite. Materials Letters 58:12-13, pages 1877-1880.
Crossref
Crossref
A.J. Leonard & W.M. Rainforth. (2003) Wear behaviour of tool steels with added (WTi)C particles. Wear 255:1-6, pages 517-526.
Crossref
Crossref
S.C Tjong & K.C Lau. (1999) Sliding wear of stainless steel matrix composite reinforced with TiB2 particles. Materials Letters 41:4, pages 153-158.
Crossref
Crossref
E Pagounis & V.K Lindroos. (1998) Processing and properties of particulate reinforced steel matrix composites. Materials Science and Engineering: A 246:1-2, pages 221-234.
Crossref
Crossref
E. Pagounis & V. K. Lindroos. (1997) Development and performance of new hard and wear-resistant engineering materials. Journal of Materials Engineering and Performance 6:6, pages 749-756.
Crossref
Crossref