Yong Sun & Richard Bailey. (2023) Tribocorrosion Behavior of γ′-Fe4N Nitride Layer Formed on Mild Steel by Plasma Nitriding in Chloride-Containing Solution. Lubricants 11:7, pages 281.
Crossref

Shiraz Ahmed Siddiqui & Maria Berkes Maros. (2022) Comparative Study on the Scratch and Wear Resistance of Diamond-like Carbon (DLC) Coatings Deposited on X42Cr13 Steel of Different Surface Conditions. Ceramics 5:4, pages 1207-1224.
Crossref

A. Gramlich, M. A. Auger & S. Richter. (2022) Plasma Nitriding of an Air-Hardening Medium Manganese Forging Steel. HTM Journal of Heat Treatment and Materials 77:4, pages 298-315.
Crossref

Rafael Luciano Dalcin, Valcir Marques de Menezes, Leonardo Fonseca Oliveira, Carlos Henrique da Silva, Julio Cesar Klein das Neves, Carla Adriana Theis Soares Diehl & Alexandre da Silva Rocha. (2022) Improvement on pitting wear resistance of gears by controlled forging and plasma nitriding. Journal of Materials Research and Technology 18, pages 4698-4713.
Crossref

D. Bhadraiah, C. Nouveau, B. Veeraswami & K. Ram Mohan Rao. (2021) Plasma based nitriding of tool steel for the enhancement of hardness. Materials Today: Proceedings 46, pages 940-943.
Crossref

Sang-Ok Chong, Il-Cho Park, Cheon Ho Lee & Seong-Jong KIm. (2019) Effect of Plasma Ion Nitriding Temperature on the Durability of SCM440 Steel. Journal of Welding and Joining 37:5, pages 448-454.
Crossref

S. Tesfaye Mekonone, I. Cristofolini, W. Pahl & A. Molinari. (2018) Surface Hardening Vs. Surface Embrittlement in Carburizing of Porous Steels. Powder Metallurgy Progress 18:1, pages 21-30.
Crossref

O. Beer & J. Fella. (2015) Untersuchung struktureller Veränderungen durch Überrollbeanspruchung mittels röntgenografischer Methoden. HTM Journal of Heat Treatment and Materials 70:3, pages 142-149.
Crossref

Ibrahim Metin?z, I. Cristofolini, W. Pahl, A. DeNicolo, P. Marconi & A. Molinari. (2014) Theoretical and experimental study of the contact fatigue behavior of a Mo?Cu steel produced by powder metallurgy. Materials Science and Engineering: A 614, pages 81-87.
Crossref

J.C. Díaz-Guillén, G. Vargas-Gutiérrez, E.E. Granda-Gutiérrez, J.S. Zamarripa-Piña, S.I. Pérez-Aguilar, J. Candelas-Ramírez & L. Álvarez-Contreras. (2013) Surface Properties of Fe4N Compounds Layer on AISI 4340 Steel Modified by Pulsed Plasma Nitriding. Journal of Materials Science & Technology 29:3, pages 287-290.
Crossref

A. Devaraju, A. Elaya Perumal, J. Alphonsa, Satish V. Kailas & S. Venugopal. (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400°C at 10−4bar. Wear 288, pages 17-26.
Crossref

A. Devaraju, A. Elayaperumal, S. Venugopal, Satish V. Kailas & J. Alphonsa. (2011) Hot Vacuum Tribological Properties of Chromium Nitride Coatings against Austenitic Stainless Steel Type AISI 316LN and Colmonoy. Applied Mechanics and Materials 110-116, pages 600-605.
Crossref

Sonia P. Brühl, Raúl Charadia, Silvia Simison, Diego G. Lamas & Amado Cabo. (2010) Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding. Surface and Coatings Technology 204:20, pages 3280-3286.
Crossref

K. Wu, G.Q. Liu, L. Wang & B.F. Xu. (2010) Research on new rapid and deep plasma nitriding techniques of AISI 420 martensitic stainless steel. Vacuum 84:6, pages 870-875.
Crossref

R.Y.Q. Fu. 2010. Surface Engineering of Light Alloys. Surface Engineering of Light Alloys 501 545 .

G. Straffelini & L. Versari. (2009) Brittle intergranular fracture of a thread: The role of a carburizing treatment. Engineering Failure Analysis 16:5, pages 1448-1453.
Crossref

Sonia P. Brühl, Raúl Charadia, Carlos Sanchez & Mariana H. Staia. (2008) Wear behavior of plasma nitrided AISI 420 stainless steel. International Journal of Materials Research 99:7, pages 779-786.
Crossref

V. Leskovšek, B. Podgornik & D. Nolan. (2008) Modelling of residual stress profiles in plasma nitrided tool steel. Materials Characterization 59:4, pages 454-461.
Crossref

E. De Las Heras, D.A. Egidi, P. Corengia, D. González-Santamaría, A. García-Luis, M. Brizuela, G.A. López & M. Flores Martinez. (2008) Duplex surface treatment of an AISI 316L stainless steel; microstructure and tribological behaviour. Surface and Coatings Technology 202:13, pages 2945-2954.
Crossref

M. Keddam. (2008) Characterization of the nitrided layers of XC38 carbon steel obtained by R.F. plasma nitriding. Applied Surface Science 254:8, pages 2276-2280.
Crossref

W. Tuckart, E. Forlerer & L. Iurman. (2007) Delayed cracking in plasma nitriding of AISI 420 stainless steel. Surface and Coatings Technology 202:1, pages 199-202.
Crossref

Evangelina De Las Heras, Daniel González Santamaría, Alberto García-Luis, Amado Cabo, Marta Brizuela, Gabriel Ybarra, Norma Mingolo, Sonia Brühl & Pablo Corengia. (2007) Microstructure and Wear Behavior of DC-Pulsed Plasma Nitrided AISI 316L Austenitic Stainless Steel. Plasma Processes and Polymers 4:S1, pages S741-S745.
Crossref

D. Grimanelis & T.S. Eyre. (2006) Sliding wear mapping of an ion nitrocarburized low alloy sintered steel. Surface and Coatings Technology 201:6, pages 3260-3268.
Crossref

N.Y. Sari & M. Yilmaz. (2006) Investigation of abrasive+erosive wear behaviour of surface hardening methods applied to AISI 1050 steel. Materials & Design 27:6, pages 470-478.
Crossref

P. Corengia, G. Ybarra, C. Moina, A. Cabo & E. Broitman. (2005) Microstructural and topographical studies of DC-pulsed plasma nitrided AISI 4140 low-alloy steel. Surface and Coatings Technology 200:7, pages 2391-2397.
Crossref

M. Pellizzari, A. Molinari & G. Straffelini. (2003) Thermal fatigue resistance of gas and plasma nitrided 41CrAlMo7 steel. Materials Science and Engineering: A 352:1-2, pages 186-194.
Crossref

C. Jacq, G. Lormand, D. Nélias, D. Girodin & A. Vincent. (2003) On the influence of residual stresses in determining the micro-yield stress profile in a nitrided steel by nano-indentation. Materials Science and Engineering: A 342:1-2, pages 311-319.
Crossref

Serdar Karaoğlu. (2002) Structural characterization and wear behavior of plasma-nitrided AISI 5140 low-alloy steel. Materials Characterization 49:4, pages 349-357.
Crossref

Y.X. Leng, J.Y. Chen, Z.M. Zeng, X.B. Tian, P. Yang, N. Huang, Z.R. Zhou & P.K. Chu. (2000) Properties of titanium oxide biomaterials synthesized by titanium plasma immersion ion implantation and reactive ion oxidation. Thin Solid Films 377-378, pages 573-577.
Crossref

B Podgornik, J Vizintin, H Ronkainen & K Holmberg. (2000) Friction and wear properties of DLC-coated plasma nitrided steel in unidirectional and reciprocating sliding. Thin Solid Films 377-378, pages 254-260.
Crossref

G. Straffelini, A. Molinari & T. Marcupuscas. (2000) Identification of rolling-sliding damage mechanisms in porous alloys. Metallurgical and Materials Transactions A 31:12, pages 3091-3099.
Crossref

Giovanni Straffelini. (2000) Impact fracture toughness of porous iron and high-strength steels. Metallurgical and Materials Transactions A 31:5, pages 1443-1451.
Crossref

B. Podgornik & J. Vizˇintin. (1999) Wear Properties of Plasma Nitrided Steel in Dry Sliding Conditions. Journal of Tribology 121:4, pages 802-807.
Crossref

T Bell, H Dong & Y Sun. (1998) Realising the potential of duplex surface engineering. Tribology International 31:1-3, pages 127-137.
Crossref

Y. Sun & T. Bell. (1993) The role of oxidation in the wear of plasma nitrided and PVD TiN coated steel. Wear 166:1, pages 119-125.
Crossref

T Bell. (1992) Surface engineering: its current and future impact on tribology. Journal of Physics D: Applied Physics 25:1A, pages A297-A306.
Crossref

Y. Sun & T. Bell. (1991) Plasma surface engineering of low alloy steel. Materials Science and Engineering: A 140, pages 419-434.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Load Bearing Capacity of Plasma Nitrided Steelunder Rolling–Sliding Contact

Articles from other publishers (37)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature