Ning Li, Ye Tian, Rui Yang, Haijun Zhang, Hua Li & Xiuyong Chen. (2022) Superhydrophobic Surface on Arc-Sprayed Aluminum Coating Via Fluorinated Polyurethane Modification: Preparation and Application in Corrosion Protection. Journal of Thermal Spray Technology 31:6, pages 1906-1917.
Crossref

Giovanni Bolelli, Maria Francesca Bonilauri, Paolo Sassatelli, Francesco Bruno, Riccardo Franci, Giovanni Pulci, Francesco Marra, Laura Paglia, Gian Carlo Gazzadi, Stefano Frabboni & Luca Lusvarghi. (2022) Pre-treatment of Selective Laser Melting (SLM) surfaces for thermal spray coating. Surface and Coatings Technology 441, pages 128533.
Crossref

GAURAV PRASHAR, HITESH VASUDEV & LALIT THAKUR. (2021) HIGH-TEMPERATURE OXIDATION AND EROSION RESISTANCE OF NI-BASED THERMALLY-SPRAYED COATINGS USED IN POWER GENERATION MACHINERY: A REVIEW. Surface Review and Letters 29:03.
Crossref

Mateus R. D. Carneiro, Bruno C. Freitas, Iuri B. de Barros, José B. de Campos, Ivan N. Bastos & Hector R. M. Costa. (2020) Evaluation of adhesion of epoxy resin sealant to improve the corrosion resistance of thermal sprayed coatings. Applied Adhesion Science 8:1.
Crossref

Pavan C. Mukundaswamy & Narendra Babu Besagrahally Ramaiah. Investigation of atmospheric plasma spraying coated aluminum oxide on MS C40. Investigation of atmospheric plasma spraying coated aluminum oxide on MS C40.

Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Katsuyoshi Kondoh & Akira Ohmori. (2012) Improvement of Adhesion and Cohesion in Plasma-Sprayed Ceramic Coatings by Heterogeneous Modification of Nonbonded Lamellar Interface Using High Strength Adhesive Infiltration. Journal of Thermal Spray Technology 22:1, pages 36-47.
Crossref

Yaping Ye, Karl Thomas Fehr, Martin Faulstich & Gerhard Wolf. (2012) RETRACTED: Chemical densification of plasma sprayed yttria stabilized zirconia (YSZ) coatings for high temperature wear and corrosion resistance. Applied Surface Science 263, pages 827.
Crossref

Fang Luo, Andrew Cockburn, Rocco Lupoi, Martin Sparkes & William O'Neill. (2012) Performance comparison of Stellite 6® deposited on steel using supersonic laser deposition and laser cladding. Surface and Coatings Technology 212, pages 119-127.
Crossref

N. Krishnamurthy, M. S. Prashanthareddy, H. P. Raju & H. S. Manohar. (2012) A Study of Parameters Affecting Wear Resistance of Alumina and Yttria Stabilized Zirconia Composite Coatings on Al-6061 Substrate. ISRN Ceramics 2012, pages 1-13.
Crossref

B. Singh Sidhu. 2012. Laser Surface Modification of Alloys for Corrosion and Erosion Resistance. Laser Surface Modification of Alloys for Corrosion and Erosion Resistance 355 366 .

R.A. Mahesh, R. Jayaganthan & S. Prakash. (2008) Evaluation of hot corrosion behaviour of HVOF sprayed NiCrAl coating on superalloys at 900°C. Materials Chemistry and Physics 111:2-3, pages 524-533.
Crossref

Xue-mei OU, Zhi SUN, Min SUN & Duan-lian ZOU. (2008) Hot-corrosion mechanism of Ni-Cr coatings at 650°C under different simulated corrosion conditions. Journal of China University of Mining and Technology 18:3, pages 444-448.
Crossref

S.B. Mishra, K. Chandra & S. Prakash. (2008) Characterisation and erosion behaviour of NiCrAlY coating produced by plasma spray method on two different Ni-based superalloys. Materials Letters 62:12-13, pages 1999-2002.
Crossref

Buta Singh Sidhu & S. Prakash. (2006) Erosion-corrosion of plasma as sprayed and laser remelted Stellite-6 coatings in a coal fired boiler. Wear 260:9-10, pages 1035-1044.
Crossref

Buta Singh Sidhu & S. Prakash. (2006) Studies on the behaviour of stellite-6 as plasma sprayed and laser remelted coatings in molten salt environment at 900°C under cyclic conditions. Journal of Materials Processing Technology 172:1, pages 52-63.
Crossref

Buta Singh Sidhu, D. Puri & S. Prakash. (2005) Mechanical and metallurgical properties of plasma sprayed and laser remelted Ni–20Cr and Stellite-6 coatings. Journal of Materials Processing Technology 159:3, pages 347-355.
Crossref

Sugehis Liscano, Linda Gil & Mariana H. Staia. (2004) Effect of sealing treatment on the corrosion resistance of thermal-sprayed ceramic coatings. Surface and Coatings Technology 188-189, pages 135-139.
Crossref

Richard Westergård & Sture Hogmark. (2004) Sealing to improve the wear properties of plasma sprayed alumina by electro-deposited Ni. Wear 256:11-12, pages 1153-1162.
Crossref

Buta Singh Sidhu, D Puri & S Prakash. (2004) Characterisations of plasma sprayed and laser remelted NiCrAlY bond coats and Ni3Al coatings on boiler tube steels. Materials Science and Engineering: A 368:1-2, pages 149-158.
Crossref

Hyung-Jun Kim, Sidoine Odoul, Chang-Hee Lee & Young-Gak Kweon. (2001) The electrical insulation behavior and sealing effects of plasma-sprayed alumina–titania coatings. Surface and Coatings Technology 140:3, pages 293-301.
Crossref

Hyung-Jun Kim, Chang-Hee Lee & Young-Gak Kweon. (2001) The effects of sealing on the mechanical properties of the plasma-sprayed alumina-titania coating. Surface and Coatings Technology 139:1, pages 75-80.
Crossref

S Steinhäuser, B Wielage, U Hofmann, Th Schnick, A Ilyuschenko & T Azarova. (2000) Plasma-sprayed wear-resistant coatings with respect to ecological aspects. Surface and Coatings Technology 131:1-3, pages 365-371.
Crossref

J. Knuuttila, P. Sorsa, T. Mäntylä, J. Knuuttila & P. Sorsa. (1999) Sealing of thermal spray coatings by impregnation. Journal of Thermal Spray Technology 8:2, pages 249-257.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Improving wear and corrosion resistance of thermal sprayed coatings

Articles from other publishers (23)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature