Citations (54)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Sivasankara Raju, Srihari Palli, Pilla Devi Prasad, Venkata Ramana Menda & Bondala Ramakrishna. (2024) A hybrid AHP-TOPSIS, MOORA technique for multi-objective optimization of thermal, mechanical, and water absorption behavior of epoxy/hemp, pine apple, and palm fiber composites. Journal of the Chinese Institute of Engineers 47:1, pages 23-36.
Read now
Read now
Thilageshwaran Subramaniam, Syam G. Krishnan, M. N. M. Ansari, Nasri A Hamid & Mohammad Khalid. (2023) Recent progress on supercapacitive performance of agrowaste fibers: a review. Critical Reviews in Solid State and Materials Sciences 48:2, pages 289-331.
Read now
Read now
Piotr Kosiński, Przemysław Brzyski, Aneta Szewczyk & Wojciech Motacki. (2018) Thermal Properties of Raw Hemp Fiber as a Loose-Fill Insulation Material. Journal of Natural Fibers 15:5, pages 717-730.
Read now
Read now
Anders Thygesen, Bo Madsen, Anne
Belinda Bjerre & Hans Lilholt. (2011) Cellulosic Fibers: Effect of Processing on Fiber Bundle Strength. Journal of Natural Fibers 8:3, pages 161-175.
Read now
Read now
Articles from other publishers (50)
Jessica Hancock, Ruby Osei-Bonsu, Mahfuzul Hoque, Lacey Samuels & E. Johan Foster. (2023) Valorization of cannabis green waste to cellulose nanomaterials via phosphoric acid hydrolysis. Industrial Crops and Products 201, pages 116888.
Crossref
Crossref
Guowei Chen, Azin Adibi, Dylan Jubinville & Tizazu H. Mekonnen. (2023) Crosslinking networks in epoxidized natural rubber/hemp hurd bio‐composites for the enhancement of thermal, mechanical, and water repellence properties. Polymer Composites.
Crossref
Crossref
K. Palanikumar, Elango Natarajan, Kalaimani Markandan, Chun Kit Ang & Gérald Franz. (2023) Targeted Pre-Treatment of Hemp Fibers and the Effect on Mechanical Properties of Polymer Composites. Fibers 11:5, pages 43.
Crossref
Crossref
H. Merve Tuncer & Z. Canan Girgin. (2023) Hemp fiber reinforced lightweight concrete (HRLWC) with coarse pumice aggregate and mitigation of degradation. Materials and Structures 56:3.
Crossref
Crossref
Afnan Hasan, M.S. Rabbi, Md. Maruf Billah & Md. Abdul Hasib. (2022) Effect of chemical treatments on properties of injection molded Nypa fruticans fiber reinforced polypropylene composite. Heliyon 8:12, pages e11967.
Crossref
Crossref
Gauri S. Deshmukh. (2022) Advancement in hemp fibre polymer composites: a comprehensive review. Journal of Polymer Engineering 42:7, pages 575-598.
Crossref
Crossref
Sheree J. Finley, Gulnaz T. Javan & Robert L. Green. (2022) Bridging Disciplines: Applications of Forensic Science and Industrial Hemp. Frontiers in Microbiology 13.
Crossref
Crossref
Mazhar Hussain, Daniel Levacher, Nathalie Leblanc, Hafida Zmamou, Irini Djeran-Maigre, Andry Razakamanantsoa & Léo Saouti. (2022) Reuse of harbour and river dredged sediments in adobe bricks. Cleaner Materials 3, pages 100046.
Crossref
Crossref
Muhammad Khusairy Bin Bakri & Md Rezaur Rahman. 2022. Fundamentals and Recent Advances in Nanocomposites Based on Polymers and Nanocellulose. Fundamentals and Recent Advances in Nanocomposites Based on Polymers and Nanocellulose
159
174
.
Albert Hernandez-Estrada, Jörg Müssig & Mark Hughes. (2022) The impact of fibre processing on the mechanical properties of epoxy matrix composites and wood-based particleboard reinforced with hemp (Cannabis sativa L.) fibre. Journal of Materials Science 57:3, pages 1738-1754.
Crossref
Crossref
Sarttrawut Tulaphol, Zhihui Sun & Noppadon Sathitsuksanoh. 2021.
301
338
.
Behnaz Baghaei & Mikael Skrifvars. (2020) All-Cellulose Composites: A Review of Recent Studies on Structure, Properties and Applications. Molecules 25:12, pages 2836.
Crossref
Crossref
Fulga Tanasă, Mădălina Zănoagă, Carmen‐Alice Teacă, Mărioara Nechifor & Asim Shahzad. (2019) Modified hemp fibers intended for fiber‐reinforced polymer composites used in structural applications—A review. I. Methods of modification. Polymer Composites 41:1, pages 5-31.
Crossref
Crossref
Samuel Réquilé, Antoine Le Duigou, Alain Bourmaud & Christophe Baley. (2019) Deeper insights into the moisture-induced hygroscopic and mechanical properties of hemp reinforced biocomposites. Composites Part A: Applied Science and Manufacturing 123, pages 278-285.
Crossref
Crossref
S. O. Amiandamhen, M. Meincken & L. Tyhoda. (2019) Phosphate bonded natural fibre composites: a state of the art assessment. SN Applied Sciences 1:8.
Crossref
Crossref
Jordi Petit, Agata Gulisano, Annemarie Dechesne & Luisa M. Trindade. (2019) Phenotypic Variation of Cell Wall Composition and Stem Morphology in Hemp (Cannabis sativa L.): Optimization of Methods. Frontiers in Plant Science 10.
Crossref
Crossref
Justine Padovani, David Legland, Miguel Pernes, Antoine Gallos, Céline Thomachot-Schneider, Darshil U. Shah, Alain Bourmaud & Johnny Beaugrand. (2019) Beating of hemp bast fibres: an examination of a hydro-mechanical treatment on chemical, structural, and nanomechanical property evolutions. Cellulose 26:9, pages 5665-5683.
Crossref
Crossref
Yunhong Jiang, Michael Lawrence, Atif Hussain, Martin Ansell & Pete Walker. (2018) Comparative moisture and heat sorption properties of fibre and shiv derived from hemp and flax. Cellulose 26:2, pages 823-843.
Crossref
Crossref
Md Rafikul Islam, Fatima Rahman, Md Nazrul Islam, Md Nasim Rana, Suresh Kumar Nath, Md Ashaduzzaman & Md Iftekhar Shams. 2019. Handbook of Ecomaterials. Handbook of Ecomaterials
2199
2211
.
Md Rafikul Islam, Fatima Rahman, Md Nazrul Islam, Md Nasim Rana, Suresh Kumar Nath, Md Ashaduzzaman & Md Iftekhar Shams. 2018. Handbook of Ecomaterials. Handbook of Ecomaterials
1
13
.
Ming Liu, Anders Thygesen, John Summerscales & Anne S. Meyer. (2017) Targeted pre-treatment of hemp bast fibres for optimal performance in biocomposite materials: A review. Industrial Crops and Products 108, pages 660-683.
Crossref
Crossref
C.A. Fuentes, P. Willekens, J. Petit, C. Thouminot, J. Müssig, L.M. Trindade & A.W. Van Vuure. (2017) Effect of the middle lamella biochemical composition on the non-linear behaviour of technical fibres of hemp under tensile loading using strain mapping. Composites Part A: Applied Science and Manufacturing 101, pages 529-542.
Crossref
Crossref
Prans Brazdausks, Maris Puke, Janis Rizhikovs & Jelena Pubule. (2017) Evaluation of cellulose content in hemp shives after salt catalyzed hydrolysis. Energy Procedia 128, pages 297-301.
Crossref
Crossref
Sameer F. Hamad, Nicola Stehling, C. Holland, J.P. Foreman & C. Rodenburg. (2017) Low-Voltage SEM of Natural Plant Fibers: Microstructure Properties (Surface and Cross-Section) and their Link to the Tensile Properties. Procedia Engineering 200, pages 295-302.
Crossref
Crossref
Camille Magniont & Gilles Escadeillas. 2017. Bio-aggregates Based Building Materials. Bio-aggregates Based Building Materials
1
37
.
Liberato Ferrara, Saulo Rocha Ferreira, Visar Krelani, Paulo Lima, Flavio Silva & Romildo Dias Toledo Filho. 2017. Recent Advances on Green Concrete for Structural Purposes. Recent Advances on Green Concrete for Structural Purposes
197
331
.
S. O. Amiandamhen, D. N. Izekor & A. O. Balogun. (2016) Performance characteristics of treated kenaf bast fibre reinforced cement composite. Journal of the Indian Academy of Wood Science 13:2, pages 156-160.
Crossref
Crossref
Giedrius Balčiūnas, Jadvyga Žvironaitė, Sigitas Vėjelis, Aleksandras Jagniatinskis & Sergejus Gaidučis. (2016) Ecological, thermal and acoustical insulating composite from hemp shives and sapropel binder. Industrial Crops and Products 91, pages 286-294.
Crossref
Crossref
Ernest Small. 2016. Cannabis. Cannabis
229
252
.
Guotao Sun, Diogo de Sacadura Rodrigues, Anders Thygesen, Geoffrey Daniel, Dinesh Fernando & Anne S. Meyer. (2016) Inocula selection in microbial fuel cells based on anodic biofilm abundance of Geobacter sulfurreducens. Chinese Journal of Chemical Engineering 24:3, pages 379-387.
Crossref
Crossref
Ming Liu, Dinesh Fernando, Anne S. Meyer, Bo Madsen, Geoffrey Daniel & Anders Thygesen. (2015) Characterization and biological depectinization of hemp fibers originating from different stem sections. Industrial Crops and Products 76, pages 880-891.
Crossref
Crossref
Ming Liu, Dinesh Fernando, Geoffrey Daniel, Bo Madsen, Anne S. Meyer, Marcel Tutor Ale & Anders Thygesen. (2015) Effect of harvest time and field retting duration on the chemical composition, morphology and mechanical properties of hemp fibers. Industrial Crops and Products 69, pages 29-39.
Crossref
Crossref
Giedrius Balčiūnas. 2015. Statybinių kompozitų su pluoštinių kanapių spaliais tyrimai. Statybinių kompozitų su pluoštinių kanapių spaliais tyrimai.
Anastasia Snegireva, Tatyana Chernova, Marina Ageeva, Simcha Lev-Yadun & Tatyana Gorshkova. (2015) Intrusive growth of primary and secondary phloem fibres in hemp stem determines fibre-bundle formation and structure. AoB Plants 7, pages plv061.
Crossref
Crossref
Silvija Kukle, Anna Putnina & Janis Gravitis. 2015. Sustainable Development, Knowledge Society and Smart Future Manufacturing Technologies. Sustainable Development, Knowledge Society and Smart Future Manufacturing Technologies
291
305
.
Nadezda Stevulova, Julia Cigasova, Adriana Estokova, Eva Terpakova, Anton Geffert, Frantisek Kacik, Eva Singovszka & Marian Holub. (2014) Properties Characterization of Chemically Modified Hemp Hurds. Materials 7:12, pages 8131-8150.
Crossref
Crossref
Huanlei Wang, Zhi Li & David Mitlin. (2014) Tailoring Biomass-Derived Carbon Nanoarchitectures for High-Performance Supercapacitors. ChemElectroChem 1:2, pages 332-337.
Crossref
Crossref
L. Marrot, A. Lefeuvre, B. Pontoire, A. Bourmaud & C. Baley. (2013) Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17). Industrial Crops and Products 51, pages 317-327.
Crossref
Crossref
Chuanwei Miao & Wadood Y. Hamad. (2013) Cellulose reinforced polymer composites and nanocomposites: a critical review. Cellulose 20:5, pages 2221-2262.
Crossref
Crossref
Huanlei Wang, Zhanwei Xu, Alireza Kohandehghan, Zhi Li, Kai Cui, Xuehai Tan, Tyler James Stephenson, Cecil K. King’ondu, Chris M. B. Holt, Brian C. Olsen, Jin Kwon Tak, Don Harfield, Anthony O. Anyia & David Mitlin. (2013) Interconnected Carbon Nanosheets Derived from Hemp for Ultrafast Supercapacitors with High Energy. ACS Nano 7:6, pages 5131-5141.
Crossref
Crossref
Zofija Jankauskienė & Elvyra Gruzdevienė. (2013) Physical parameters of dew retted and water retted hemp (Cannabis sativa L.) fibresSėjamosios kanapės (Cannabis sativa L.) klojėto ir mirkyto pluošto fizikiniai rodikliai. Zemdirbyste-Agriculture 100:1, pages 71-80.
Crossref
Crossref
Dasong Dai & Mizi Fan. (2013) Green modification of natural fibres with nanocellulose. RSC Advances 3:14, pages 4659.
Crossref
Crossref
Giedrius Balčiūnas, Sigitas Vėjelis, Saulius Vaitkus & Agnė Kairytė. (2013) Physical Properties and Structure of Composite Made by Using Hemp Hurds and Different Binding Materials. Procedia Engineering 57, pages 159-166.
Crossref
Crossref
Dasong Dai, Mizi Fan & Philip Collins. (2013) Fabrication of nanocelluloses from hemp fibers and their application for the reinforcement of hemp fibers. Industrial Crops and Products 44, pages 192-199.
Crossref
Crossref
Mark Hughes. (2011) Defects in natural fibres: their origin, characteristics and implications for natural fibre-reinforced composites. Journal of Materials Science 47:2, pages 599-609.
Crossref
Crossref
Anders Thygesen, Anne Belinda Thomsen, Sam Possemiers & Willy Verstraete. (2010) Integration of Microbial Electrolysis Cells (MECs) in the Biorefinery for Production of Ethanol, H2 and Phenolics. Waste and Biomass Valorization 1:1, pages 9-20.
Crossref
Crossref
T. Thamae, S. Aghedo, C. Baillie & D. Matovic. 2009. Handbook of Tensile Properties of Textile and Technical Fibres. Handbook of Tensile Properties of Textile and Technical Fibres
73
99
.
Ryan H. Mills, Douglas J. Gardner & Rupert Wimmer. (2008) Inverse gas chromatography for determining the dispersive surface free energy and acid–base interactions of sheet molding compound—Part II 14 Ligno‐cellulosic fiber types for possible composite reinforcement. Journal of Applied Polymer Science 110:6, pages 3880-3888.
Crossref
Crossref
Anders Thygesen, Anne Belinda Thomsen, Geoffrey Daniel & Hans Lilholt. (2007) Comparison of composites made from fungal defibrated hemp with composites of traditional hemp yarn. Industrial Crops and Products 25:2, pages 147-159.
Crossref
Crossref
Anne Belinda Thomsen, Anders Thygesen, Vibeke Bohn, Kristina Vad Nielsen, Bodil Pallesen & Michael S?gaard J?rgensen. (2006) Effects of chemical?physical pre-treatment processes on hemp fibres for reinforcement of composites and for textiles. Industrial Crops and Products 24:2, pages 113-118.
Crossref
Crossref