Citations (104)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
M. M. S. Chan, C. K. Y. Lo & C. W. Kan. (2023) Application of additive manufacturing/3D printing on rehabilitation and healthcare: a systematic and citation network analysis review. The Journal of The Textile Institute 0:0, pages 1-10.
Read now
Read now
Kundai R. Mazarura, Pradeep Kumar & Yahya E. Choonara. (2022) Customized 3D printed multi-drug systems: an effective and efficient approach to polypharmacy. Expert Opinion on Drug Delivery 19:9, pages 1149-1163.
Read now
Read now
E. B. Souto, J. C. Campos, S. C. Filho, M. C. Teixeira, C. Martins-Gomes, A. Zielinska, C. Carbone & A. M. Silva. (2019) 3D printing in the design of pharmaceutical dosage forms. Pharmaceutical Development and Technology 24:8, pages 1044-1053.
Read now
Read now
Sara Santos, Bruno Soares, Marco Leite & Jorge Jacinto. (2017) Design and development of a customised knee positioning orthosis using low cost 3D printers. Virtual and Physical Prototyping 12:4, pages 322-332.
Read now
Read now
Articles from other publishers (100)
Kazi Asraf Ali, Sabyasachi Choudhuri, Sk Mohin & Susmita Goswami. (2023) 3D bioprinting of implantable and wearable devices. Bioprinting 36, pages e00312.
Crossref
Crossref
ANJALI KURIL, ANJU AMBEKAR, BHARATI NIMASE, PRACHI GIRI, PRAJWAL NIKAM, HARITA DESAI & SHUBHANGI AHER. (2023) EXPLORING THE POTENTIAL OF 3D PRINTING IN PHARMACEUTICAL DEVELOPMENT. International Journal of Current Pharmaceutical Research, pages 31-42.
Crossref
Crossref
Yujing Liu, Anna M Leonova, Paul G. Royall, Bambang V.E.B. Abdillah Akbar, Zhengge Cao, Stuart A. Jones, Abdullah Isreb, Daniel B. Hawcutt & Mohamed A. Alhnan. (2023) Laser-cutting: A novel alternative approach for point-of-care manufacturing of bespoke tablets. International Journal of Pharmaceutics 647, pages 123518.
Crossref
Crossref
Nectarios Vidakis, Markos Petousis, Nikolaos Michailidis, Vassilis Papadakis, Nikolaos Mountakis, Apostolos Argyros, Evgenia Dimitriou, Chrysa Charou & Amalia Moutsopoulou. (2023) Polylactic acid/silicon nitride biodegradable and biomedical Nanocomposites with optimized rheological and thermomechanical response for material extrusion additive manufacturing. Biomedical Engineering Advances 6, pages 100103.
Crossref
Crossref
Andrea Demeco, Ruben Foresti, Antonio Frizziero, Nicola Daracchi, Francesco Renzi, Margherita Rovellini, Antonello Salerno, Chiara Martini, Laura Pelizzari & Cosimo Costantino. (2023) The Upper Limb Orthosis in the Rehabilitation of Stroke Patients: The Role of 3D Printing. Bioengineering 10:11, pages 1256.
Crossref
Crossref
Maryna Stasevych & Viktor Zvarych. (2023) Innovative Robotic Technologies and Artificial Intelligence in Pharmacy and Medicine: Paving the Way for the Future of Health Care—A Review. Big Data and Cognitive Computing 7:3, pages 147.
Crossref
Crossref
Farnaz Niknam, Vahid Rahmanian, Seyyed Mojtaba Mousavi, Seyyed Alireza Hashemi, Aziz Babapoor & Chin Wei Lai. 2023. Biomimicry Materials and Applications. Biomimicry Materials and Applications
147
168
.
Barbara Segedin, Manja Kobav & Helena Barbara Zobec Logar. (2023) The Use of 3D Printing Technology in Gynaecological Brachytherapy—A Narrative Review. Cancers 15:16, pages 4165.
Crossref
Crossref
Amit Mahajan, Gurcharan Singh & Sandeep Devgan. (2023) Additive manufacturing of metallic biomaterials: a concise review. Archives of Civil and Mechanical Engineering 23:3.
Crossref
Crossref
Pavan Kalyan BG, Sonal Mehrotra, Shirleen Miriam Marques, Lalit Kumar & Ruchi Verma. (2023) 3D printing in personalized medicines: A focus on applications of the technology. Materials Today Communications 35, pages 105875.
Crossref
Crossref
AbdAlmonem Doolaanea, NurFaezah Latif, Shubham Singh, Mohit Kumar, Mohamad Faizal Safa’at, Mulham Alfatama, Raihana Edros & Amit Bhatia. (2023) A Review on Physicochemical Properties of Polymers Used as Filaments in 3D-Printed Tablets. AAPS PharmSciTech 24:5.
Crossref
Crossref
Doris Baumgartner, Johannes Peter Schramel, Silvio Kau, Ewald Unger, Gunpreet Oberoi, Christian Peham & Matthias Eberspächer-Schweda. (2023) 3D printed plates based on generative design biomechanically outperform manual digital fitting and conventional systems printed in photopolymers in bridging mandibular bone defects of critical size in dogs. Frontiers in Veterinary Science 10.
Crossref
Crossref
Jensen Ang, John J.Y. Zhang, Michael Yam, Tomasz Maszczyk, Wai Hoe Ng & Kai Rui Wan. (2023) Clinical Application of a Stereotactic Frame–Specific 3D-Printed Attachment for Deep Brain Stimulation Surgery. World Neurosurgery 170, pages e777-e783.
Crossref
Crossref
Virendra Kumar Verma, Sachin S. Kamble & L. Ganapathy. (2022) 3D-printed medical models supply chain: barriers modeling and analysis. Rapid Prototyping Journal 29:2, pages 288-311.
Crossref
Crossref
Marcel Martawidjaja, Sharon Yemima, Nico Hananda, Azure Kamul, Stefanus Hanifa Prajitna, Christian Harito & Rudy Susanto. (2023) 3D Printing for medical devices: Mini review and bibliometric study. E3S Web of Conferences 426, pages 01077.
Crossref
Crossref
Sotiriοs Ι. Εkonomou, Shwe Soe & Alexandros Ch. Stratakos. (2023) An explorative study on the antimicrobial effects and mechanical properties of 3D printed PLA and TPU surfaces loaded with Ag and Cu against nosocomial and foodborne pathogens. Journal of the Mechanical Behavior of Biomedical Materials 137, pages 105536.
Crossref
Crossref
Mohammad Mirkhalaf, Yinghui Men, Rui Wang, Young No & Hala Zreiqat. (2023) Personalized 3D printed bone scaffolds: A review. Acta Biomaterialia 156, pages 110-124.
Crossref
Crossref
Shallu Kutlehria, Anisha D’Souza, Benjamin S. Bleier & Mansoor M. Amiji. (2022) Role of 3D Printing in the Development of Biodegradable Implants for Central Nervous System Drug Delivery. Molecular Pharmaceutics 19:12, pages 4411-4427.
Crossref
Crossref
Thara Tom, Sithara P. Sreenilayam, Dermot Brabazon, Josmin P. Jose, Blessy Joseph, Kailasnath Madanan & Sabu Thomas. (2022) Additive manufacturing in the biomedical field-recent research developments. Results in Engineering 16, pages 100661.
Crossref
Crossref
Livia Adalbert, S P Yamini Kanti, Orsolya Jójárt-Laczkovich, Hussein Akel & Ildikó Csóka. (2022) Expanding Quality by Design Principles to Support 3D Printed Medical Device Development Following the Renewed Regulatory Framework in Europe. Biomedicines 10:11, pages 2947.
Crossref
Crossref
Bridget M. Schutz, Dallin Sudbury, Neil Scott, Baylee Mayoh & Belinda Chan. (2022) Customized Three-Dimensional Printed Splints for Neonates in the Neonatal Intensive Care Unit: Three Case Reports. The American Journal of Occupational Therapy 76:6.
Crossref
Crossref
Chien-Yu Huang, Ting-Shou Chang, Lisa Alice Hwang & Yaoh-Shiang Lin. (2022) Novel airway-cartilage combined model for medialization laryngoplasty and laryngotracheal reconstruction surgery planning. Journal of the Chinese Medical Association 85:11, pages 1076-1082.
Crossref
Crossref
Takashi Kamio & Takeshi Onda. (2022) Fused Deposition Modeling 3D Printing in Oral and Maxillofacial Surgery: Problems and Solutions. Cureus.
Crossref
Crossref
Heba A. Eassa, Nada A. Helal, Ahmed M. Amer, Aliaa Fouad, Asser F. Bedair, Reem Nagib, Ihab Mansoor, Motaz Hawash, Maha Abdul-Latif, Kamilia H.A. Mohammed, Mohamed A. Helal & Mohamed Ismail Nounou. (2022) 3D-Printed Microfluidics Potential in Combating Future and Current
Pandemics (COVID-19). Recent Advances in Drug Delivery and Formulation 16:3, pages 192-216.
Crossref
Crossref
Keegan Mendez, Darragh G. Kennedy, Dee Dee Wang, Brian O’Neill & Ellen T. Roche. (2022) Left Atrial Appendage Occlusion: Current Stroke Prevention Strategies and a Shift Toward Data-Driven, Patient-Specific Approaches. Journal of the Society for Cardiovascular Angiography & Interventions 1:5, pages 100405.
Crossref
Crossref
Jennifer K.S. Tsui, Stephen Bell, Lyndon da Cruz, Andrew D. Dick & Mandeep S. Sagoo. (2022) Applications of three-dimensional printing in ophthalmology. Survey of Ophthalmology 67:4, pages 1287-1310.
Crossref
Crossref
Som P. Singh, Fahad M. Qureshi & Farhan Baig. (2022) Commentary: Accessing 3D Printed Vascular Phantoms for Procedural Simulation. Frontiers in Surgery 9.
Crossref
Crossref
Giulia Auriemma, Carmela Tommasino, Giovanni Falcone, Tiziana Esposito, Carla Sardo & Rita Patrizia Aquino. (2022) Additive Manufacturing Strategies for Personalized Drug Delivery Systems and Medical Devices: Fused Filament Fabrication and Semi Solid Extrusion. Molecules 27:9, pages 2784.
Crossref
Crossref
Lalit Kumar, Abid Haleem & Mohd. Javaid. (2022) Systematic Development in Medical by Using 3D Printing Technology: A Brief Review. Journal of Industrial Integration and Management.
Crossref
Crossref
Mohammed S Algahtani & Javed Ahmad. (2022) 3D printing technique in the development of self-nanoemulsifying drug delivery system: scope and future prospects. Therapeutic Delivery 13:3, pages 135-139.
Crossref
Crossref
Teodoro Martín-Noguerol, Félix Paulano-Godino, Roy F. Riascos & Antonio Luna. (2022) 3D printing units should be centrally managed in the radiology department. European Journal of Radiology 148, pages 110161.
Crossref
Crossref
Lorena Maria Dering, Matheus Kahakura Franco Pedro, Ana Carolina Felipe da Silva, André Giacomelli Leal & Mauren Abreu de Souza. (2022) Experience in Using Additive Manufacturing of Cerebral Aneurysms as a 3D Assistant Tool in Surgical Planning. Brazilian Archives of Biology and Technology 65.
Crossref
Crossref
Dinesh Rokaya, Suchada Kongkiatkamon, Artak Heboyan, Van Viet Dam, Pokpong Amornvit, Zohaib Khurshid, Viritpon Srimaneepong & Muhammad Sohail Zafar. 2022. Functional Biomaterials. Functional Biomaterials
319
339
.
Viness Pillay, Samson A. Adeyemi, Pradeep Kumar, Lisa C. du Toit & Yahya E. Choonara. 2022. Handbook of Space Pharmaceuticals. Handbook of Space Pharmaceuticals
221
258
.
Aytug Kara, Athina Vassiliadou, Baris Ongoren, William Keeble, Richard Hing, Aikaterini Lalatsa & Dolores R. Serrano. (2021) Engineering 3D Printed Microfluidic Chips for the Fabrication of Nanomedicines. Pharmaceutics 13:12, pages 2134.
Crossref
Crossref
Lalit Kumar, Abid Haleem & Mohd. Javaid. (2021) Impact of three dimensional printing in orthopedics. Global Health Journal 5:4, pages 178-182.
Crossref
Crossref
R-Jay Relano, Ronnie Concepcion, Kate Francisco, Mike Louie Enriquez, Homer Co, Ryan Rhay Vicerra & Argel Bandala. (2021) A Bibliometric and Trend Analysis of Applied Technologies in Bioengineering for Additive Manufacturing of Human Organs. A Bibliometric and Trend Analysis of Applied Technologies in Bioengineering for Additive Manufacturing of Human Organs.
Budi Arifvianto, Teguh Nur Iman, Benidiktus Tulung Prayoga, Rini Dharmastiti, Urip Agus Salim, Muslim Mahardika & Suyitno. (2021) Tensile properties of the FFF-processed thermoplastic polyurethane (TPU) elastomer. The International Journal of Advanced Manufacturing Technology 117:5-6, pages 1709-1719.
Crossref
Crossref
Muhammad Arif Mahmood. (2021) 3D Printing in Drug Delivery and Biomedical Applications: A State-of-the-Art Review. Compounds 1:3, pages 94-115.
Crossref
Crossref
Yahya Bozkurt & Elif Karayel. (2021) 3D printing technology; methods, biomedical applications, future opportunities and trends. Journal of Materials Research and Technology 14, pages 1430-1450.
Crossref
Crossref
Teodoro Martin-Noguerol, Felix Paulano-Godino, Christine O. Menias & Antonio Luna. (2021) Lessons learned from COVID-19 and 3D printing. The American Journal of Emergency Medicine 46, pages 659-660.
Crossref
Crossref
Michael-Alex Kamlow, Saumil Vadodaria, Azarmidokht Gholamipour-Shirazi, Fotis Spyropoulos & Tom Mills. (2021) 3D printing of edible hydrogels containing thiamine and their comparison to cast gels. Food Hydrocolloids 116, pages 106550.
Crossref
Crossref
William Clifton, Aaron Damon, Eric Nottmeier & Mark Pichelmann. (2021) Establishing a Cost-Effective 3-Dimensional Printing Laboratory for Anatomical Modeling and Simulation. Simulation in Healthcare: The Journal of the Society for Simulation in Healthcare 16:3, pages 213-220.
Crossref
Crossref
Xiaojiang Sun, Erzhu Yang, Changqing Zhao, Xiaofei Cheng, Kai Zhang, Haijun Tian, Baozhi Ding, Hua Li, Wenbo Jiang, Kerong Dai & Jie Zhao. (2021) Progress in the Application of 3D Printing Technology in Spine Surgery. Journal of Shanghai Jiaotong University (Science) 26:3, pages 352-360.
Crossref
Crossref
Donald C. HallJr.Jr., Phillip Palmer, Hai-Feng Ji, Garth D. Ehrlich & Jarosław E. Król. (2021) Bacterial Biofilm Growth on 3D-Printed Materials. Frontiers in Microbiology 12.
Crossref
Crossref
Yahya BOZKURT, Hamit GÜLSOY & Elif KARAYEL. (2021) Eklemeli İmalat Teknolojilerinin Tıbbi Ekipmanların Üretiminde Kullanımı. El-Cezeri Fen ve Mühendislik Dergisi.
Crossref
Crossref
Erfan Rezvani Ghomi, Saeideh Kholghi Eshkalak, Sunpreet Singh, Amutha Chinnappan, Seeram Ramakrishna & Roger Narayan. (2021) Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK. Rapid Prototyping Journal 27:3, pages 592-616.
Crossref
Crossref
Mohammed S. Algahtani. (2021) Assessment of Pharmacist’s Knowledge and Perception toward 3D Printing Technology as a Dispensing Method for Personalized Medicine and the Readiness for Implementation. Pharmacy 9:1, pages 68.
Crossref
Crossref
Lucas Lemarié, Aravind Anandan, Emma Petiot, Christophe Marquette & Edwin-Joffrey Courtial. (2021) Rheology, simulation and data analysis toward bioprinting cell viability awareness. Bioprinting 21, pages e00119.
Crossref
Crossref
Peter Endre Eltes, Marton Bartos, Benjamin Hajnal, Agoston Jakab Pokorni, Laszlo Kiss, Damien Lacroix, Peter Pal Varga & Aron Lazary. (2021) Development of a Computer-Aided Design and Finite Element Analysis Combined Method for Affordable Spine Surgical Navigation With 3D-Printed Customized Template. Frontiers in Surgery 7.
Crossref
Crossref
Mika Salmi. (2021) Additive Manufacturing Processes in Medical Applications. Materials 14:1, pages 191.
Crossref
Crossref
Zhen Wang, Wasim Kapadia, Cuidi Li, Feng Lin, Ruben F. Pereira, Pedro L. Granja, Bruno Sarmento & Wenguo Cui. (2021) Tissue-specific engineering: 3D bioprinting in regenerative medicine. Journal of Controlled Release 329, pages 237-256.
Crossref
Crossref
A. A. Grigorieva, A. A. Bulavskaya, D. A. Belousov, I. A. Miloichikova, Yu. M. Cherepennikov & S. G. Stuchebrov. (2021) Applicability of 3D-Printed Polymer Compensators for Modulated Electron Radiotherapy (MERT). Biomedical Engineering 54:5, pages 337-340.
Crossref
Crossref
Md. Jasim Uddin & Monika Nasrin Munni. 2021. Vision, Sensing and Analytics: Integrative Approaches. Vision, Sensing and Analytics: Integrative Approaches
267
305
.
Masato Narita, Takashi Takaki, Takahiko Shibahara, Masashi Iwamoto, Takashi Yakushiji & Takashi Kamio. (2020) Utilization of desktop 3D printer-fabricated “Cost-Effective” 3D models in orthognathic surgery. Maxillofacial Plastic and Reconstructive Surgery 42:1.
Crossref
Crossref
Sarwar Beg, Waleed H. Almalki, Arshi Malik, Mohd Farhan, Mohammad Aatif, Ziyaur Rahman, Nabil K. Alruwaili, Majed Alrobaian, Mohammed Tarique & Mahfoozur Rahman. (2020) 3D printing for drug delivery and biomedical applications. Drug Discovery Today 25:9, pages 1668-1681.
Crossref
Crossref
Shery Jacob, Anroop B. Nair, Vimal Patel & Jigar Shah. (2020) 3D Printing Technologies: Recent Development and Emerging Applications in Various Drug Delivery Systems. AAPS PharmSciTech 21:6.
Crossref
Crossref
Aaron Damon, William Clifton, Fidel Valero-Moreno & Alfredo Quinones-Hinojosa. (2020) Cost-Effective Method for 3-Dimensional Printing Dynamic Multiobject and Patient-Specific Brain Tumor Models: Technical Note. World Neurosurgery 140, pages 173-179.
Crossref
Crossref
Federica Rey, Bianca Barzaghini, Alessandra Nardini, Matteo Bordoni, Gian Vincenzo Zuccotti, Cristina Cereda, Manuela Teresa Raimondi & Stephana Carelli. (2020) Advances in Tissue Engineering and Innovative Fabrication Techniques for 3-D-Structures: Translational Applications in Neurodegenerative Diseases. Cells 9:7, pages 1636.
Crossref
Crossref
Pushpdant Jain, Masud Rana, Jayanta Kumar Biswas & Mohammed Rajik Khan. (2020) Biomechanics of spinal implants—a review. Biomedical Physics & Engineering Express 6:4, pages 042002.
Crossref
Crossref
Pariksha Jolene Kondiah, Pierre P. D. Kondiah, Yahya E. Choonara, Thashree Marimuthu & Viness Pillay. (2020) A 3D Bioprinted Pseudo-Bone Drug Delivery Scaffold for Bone Tissue Engineering. Pharmaceutics 12:2, pages 166.
Crossref
Crossref
Mahima Singh & Sriramakamal Jonnalagadda. (2020) Advances in bioprinting using additive manufacturing. European Journal of Pharmaceutical Sciences 143, pages 105167.
Crossref
Crossref
Elena Manuela Samaila, Stefano Negri, Alessandro Zardini, Nicola Bizzotto, Tommaso Maluta, Cecilia Rossignoli & Bruno Magnan. (2019) Value of three-dimensional printing of fractures in orthopaedic trauma surgery. Journal of International Medical Research 48:1, pages 030006051988729.
Crossref
Crossref
Viness Pillay, Samson A. Adeyemi, Pradeep Kumar, Lisa C. du Toit & Yahya E. Choonara. 2020. Handbook of Space Pharmaceuticals. Handbook of Space Pharmaceuticals
1
38
.
Dong Hae Ho, Panuk Hong, Joong Tark Han, Sang‐Youn Kim, S. Joon Kwon & Jeong Ho Cho. (2019) 3D‐Printed Sugar Scaffold for High‐Precision and Highly Sensitive Active and Passive Wearable Sensors. Advanced Science 7:1.
Crossref
Crossref
Jinwu Wang, Leyi Cai, Linzhen Xie, Hua Chen, Xiaoshan Guo & Kehe Yu. (2019) 3D printing-based Ganz approach for treatment of femoral head fractures: a prospective analysis. Journal of Orthopaedic Surgery and Research 14:1.
Crossref
Crossref
Syed Umer Abdi, Walied Moussa & Ahmed Jawad Qureshi. (2019) Qualitative & Quantitative Assessment of 3D Printing of Prostheses in Low Economic Setting. Qualitative & Quantitative Assessment of 3D Printing of Prostheses in Low Economic Setting.
Timothy A. Burkhart, Manjunath Sadashivaiah, Jacob Reeves & Paraham Rasounlinejad. (2019) The Evaluation of a Novel Three-Dimensional Printed Expandable Pedicle Screw Sleeve Insert. Journal of Medical Devices 13:3.
Crossref
Crossref
Feras Alshomer, Faisal AlFaqeeh, Mohammed Alariefy, Ikhlass Altweijri & Taghreed Alhumsi. (2019) Low-Cost Desktop-Based Three-Dimensional-Printed Patient-Specific Craniofacial Models in Surgical Counseling, Consent Taking, and Education of Parent of Craniosynostosis Patients: A Comparison With Conventional Visual Explanation Modalities. Journal of Craniofacial Surgery 30:6, pages 1652-1656.
Crossref
Crossref
Simon Backhouse, Darci Taylor & James A. Armitage. (2018) Is This Mine to Keep? Three‐dimensional Printing Enables Active, Personalized Learning in Anatomy. Anatomical Sciences Education 12:5, pages 518-528.
Crossref
Crossref
Mohammed S. Algahtani, Abdul Aleem Mohammed & Javed Ahmad. (2019) Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications. Current Pharmaceutical Design 24:42, pages 4991-5008.
Crossref
Crossref
Sabna Kotta, Anroop Nair & Nimer Alsabeelah. (2019) 3D Printing Technology in Drug Delivery: Recent Progress and Application. Current Pharmaceutical Design 24:42, pages 5039-5048.
Crossref
Crossref
Musarrat H. Warsi, Mohammad Yusuf, Majed Al Robaian, Maria Khan, Abdul Muheem & Saba Khan. (2019) 3D Printing Methods for Pharmaceutical Manufacturing: Opportunity and Challenges. Current Pharmaceutical Design 24:42, pages 4949-4956.
Crossref
Crossref
Pavan Kumar Nukala, Siddhant Palekar, Nayan Solanki, Yige Fu, Manali Patki, Ali A Shohatee, Louis Trombetta & Ketan Patel. (2019) Investigating the application of FDM 3D printing pattern in preparation of patient-tailored dosage forms. Journal of 3D Printing in Medicine 3:1, pages 23-37.
Crossref
Crossref
Elisa Mussi, Rocco Furferi, Yary Volpe, Flavio Facchini, Kathleen S. McGreevy & Francesca Uccheddu. (2019) Ear Reconstruction Simulation: From Handcrafting to 3D Printing. Bioengineering 6:1, pages 14.
Crossref
Crossref
Tatsuaki Tagami, Mutsumi Ando, Noriko Nagata, Eiichi Goto, Natsumi Yoshimura, Takao Takeuchi, Takehiro Noda & Tetsuya Ozeki. (2019) Fabrication of Naftopidil-Loaded Tablets Using a Semisolid Extrusion-Type 3D Printer and the Characteristics of the Printed Hydrogel and Resulting Tablets. Journal of Pharmaceutical Sciences 108:2, pages 907-913.
Crossref
Crossref
Mukul Ramola, Vinod Yadav & Rakesh Jain. (2019) On the adoption of additive manufacturing in healthcare: a literature review. Journal of Manufacturing Technology Management 30:1, pages 48-69.
Crossref
Crossref
Juan Miguel Gómez-Palomo, Francisco J. Estades-Rubio, Stephan Meschian-Coretti, Elvira Montañez-Heredia & Francisco J. De Santos-de la Fuente. (2019) Internal Hemipelvectomy and Reconstruction Assisted by 3D Printing Technology Using Premade Intraoperative Cutting and Placement Guides in a Patient With Pelvic Sarcoma. JBJS Case Connector 9:4, pages e0060-e0060.
Crossref
Crossref
Marek Macko, Zbigniew Szczepański, Dariusz Mikołajewski, Joanna Nowak, Emilia Mikołajewska, Jacek Furtak & Sławomir Listopadzki. (2019) Design and manufacture of artificial organs made of polymers. MATEC Web of Conferences 254, pages 06006.
Crossref
Crossref
Guillaume Bouguéon, Tina Kauss, Bérangère Dessane, Philippe Barthélémy & Sylvie Crauste-Manciet. (2019) Micro- and nano-formulations for bioprinting and additive manufacturing. Drug Discovery Today 24:1, pages 163-178.
Crossref
Crossref
Ashish, Nabeel Ahmad, P. Gopinath & Alexandr Vinogradov. 2019. 3D Printing Technology in Nanomedicine. 3D Printing Technology in Nanomedicine
1
22
.
Evert A. Fuenmayor, Andrew V. Healy, Maurice Dalton & Ian Major. 2019. Polymer-Based Additive Manufacturing. Polymer-Based Additive Manufacturing
143
160
.
Jakub Kopowski, Izabela Rojek, Dariusz Mikołajewski & Marek Macko. 2019. Advances in Manufacturing II. Advances in Manufacturing II
298
306
.
Marek Macko, Zbigniew Szczepański, Dariusz Mikołajewski, Joanna Nowak, Emilia Mikołajewska & Jacek Furtak. 2019. Proceedings of the 14th International Scientific Conference: Computer Aided Engineering. Proceedings of the 14th International Scientific Conference: Computer Aided Engineering
462
469
.
Federico MochiFabio de MatteisPaolo ProspositoLuca BurrattiRoberto FranciniMauro Casalboni. (2018) One Photon 3D Polymerization via Direct Laser Writing. Materials Science Forum 941, pages 2142-2147.
Crossref
Crossref
Dafydd O. Visscher, Sjoerd te Slaa, Mariëlle E. Jaspers, Marloes van de Hulsbeek, Jorien Borst, Jan Wolff, Tymour Forouzanfar & Paul P. van Zuijlen. (2018) 3D printing of patient-specific neck splints for the treatment of post-burn neck contractures. Burns & Trauma 6.
Crossref
Crossref
Rita Patrizia Aquino, Sergio Barile, Antonio Grasso & Marialuisa Saviano. (2018) Envisioning smart and sustainable healthcare: 3D Printing technologies for personalized medication. Futures 103, pages 35-50.
Crossref
Crossref
Trina Majumdar, Neil Eisenstein, Jess E. Frith, Sophie C. Cox & Nick Birbilis. (2018) Additive Manufacturing of Titanium Alloys for Orthopedic Applications: A Materials Science Viewpoint. Advanced Engineering Materials 20:9.
Crossref
Crossref
Fabrizio Fina, Alvaro Goyanes, Christine M. Madla, Atheer Awad, Sarah J. Trenfield, Jia Min Kuek, Pavanesh Patel, Simon Gaisford & Abdul W. Basit. (2018) 3D printing of drug-loaded gyroid lattices using selective laser sintering. International Journal of Pharmaceutics 547:1-2, pages 44-52.
Crossref
Crossref
Seng Han Lim, Himanshu Kathuria, Justin Jia Yao Tan & Lifeng Kang. (2018) 3D printed drug delivery and testing systems — a passing fad or the future?. Advanced Drug Delivery Reviews 132, pages 139-168.
Crossref
Crossref
Tatsuaki Tagami, Noriko Nagata, Naomi Hayashi, Emi Ogawa, Kaori Fukushige, Norihito Sakai & Tetsuya Ozeki. (2018) Defined drug release from 3D-printed composite tablets consisting of drug-loaded polyvinylalcohol and a water-soluble or water-insoluble polymer filler. International Journal of Pharmaceutics 543:1-2, pages 361-367.
Crossref
Crossref
Pratap Chandra Acharya, Saritha Shetty, Clara Fernandes, Divya Suares, Rahul Maheshwari & Rakesh K. Tekade. 2018. Dosage Form Design Considerations. Dosage Form Design Considerations
1
55
.
Guifang Gao, Ying Huang, Arndt F. Schilling, Karen Hubbell & Xiaofeng Cui. (2018) Organ Bioprinting: Are We There Yet?. Advanced Healthcare Materials 7:1, pages 1701018.
Crossref
Crossref
Naila A. Oliveira, Kelly C.S. Roballo, Antônio F.S. Lisboa Neto, Thaisa Meira Sandini, Amilton Cesar dos Santos, Daniele S. Martins & Carlos E. Ambrosio. (2017) Bioimpressão e produção de mini-órgãos com células tronco. Pesquisa Veterinária Brasileira 37:9, pages 1032-1039.
Crossref
Crossref
Tsung-yen Hsieh, Raj Dedhia, Brian Cervenka & Travis T. Tollefson. (2017) 3D Printing: current use in facial plastic and reconstructive surgery. Current Opinion in Otolaryngology & Head & Neck Surgery 25:4, pages 291-299.
Crossref
Crossref
Fabrizio Fina, Alvaro Goyanes, Simon Gaisford & Abdul W. Basit. (2017) Selective laser sintering (SLS) 3D printing of medicines. International Journal of Pharmaceutics 529:1-2, pages 285-293.
Crossref
Crossref
R.C.R. Beck, P.S. Chaves, A. Goyanes, B. Vukosavljevic, A. Buanz, M. Windbergs, A.W. Basit & S. Gaisford. (2017) 3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems. International Journal of Pharmaceutics 528:1-2, pages 268-279.
Crossref
Crossref
Marek Macko, Zbigniew Szczepanski, Emilia MikolajewskaJoanna Nowak & Dariusz Mikolajewski. (2017) Repository of 3D images for education and everyday clinical practice purposes. Bio-Algorithms and Med-Systems 13:2, pages 111-116.
Crossref
Crossref
Trevor D. Crafts, Susan E. Ellsperman, Todd J. Wannemuehler, Travis D. Bellicchi, Taha Z. Shipchandler & Avinash V. Mantravadi. (2016) Three‐Dimensional Printing and Its Applications in Otorhinolaryngology–Head and Neck Surgery. Otolaryngology–Head and Neck Surgery 156:6, pages 999-1010.
Crossref
Crossref
Yong Chan Cho, Seung Ho Lee, Yang Hyun Cho & Young Bin Choy. (2017) Adapter-based Safety Injection System for Prevention of Wrong Route and Wrong Patient Medication Errors. Journal of Korean Medical Science 32:12, pages 1938.
Crossref
Crossref