Citations (80)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Kwok Chuen Wong, Edgar Yan Sun, Irene Oi Ling Wong & Shekhar Madhukar Kumta. (2023) Mixed Reality Improves 3D Visualization and Spatial Awareness of Bone Tumors for Surgical Planning in Orthopaedic Oncology: A Proof of Concept Study. Orthopedic Research and Reviews 15, pages 139-149.
Read now
Read now
Shiyan Yang, Weibo Jiang, Xiao Ma, Zuobin Wang, Robert L Sah, Jincheng Wang & Yang Sun. (2023) Nanoscale Morphologies on the Surface of 3D-Printed Titanium Implants for Improved Osseointegration: A Systematic Review of the Literature. International Journal of Nanomedicine 18, pages 4171-4191.
Read now
Read now
Pralhad Pesode & Shivprakash Barve. (2023) Additive manufacturing of metallic biomaterials: sustainability aspect, opportunity, and challenges. Journal of Industrial and Production Engineering 40:6, pages 464-505.
Read now
Read now
Kwok Chuen Wong, Yan Edgar Sun & Shekhar Madhukar Kumta. (2022) Review and Future/Potential Application of Mixed Reality Technology in Orthopaedic Oncology. Orthopedic Research and Reviews 14, pages 169-186.
Read now
Read now
Xiang Fang, Zeping Yu, Yan Xiong, Fang Yuan, Hongyuan Liu, Fan Wu, Wenli Zhang, Yi Luo, Liuhong Song, Chongqi Tu & Hong Duan. (2018) Improved virtual surgical planning with 3D- multimodality image for malignant giant pelvic tumors. Cancer Management and Research 10, pages 6769-6777.
Read now
Read now
Articles from other publishers (75)
M. Giachino, A. Aprato, B. Limone, G. Ciccone, T. Rosso & A. Massè. (2023) Impact of three-dimensional printed planning in Paprosky III acetabular defects: a case–control and cost-comparison analysis. International Orthopaedics 47:6, pages 1465-1472.
Crossref
Crossref
Reza Shamsabadi. 2023. Advances in 3D Printing. Advances in 3D Printing.
Manojit Das, Arijit Jana, Rajat Mishra, Swapan Maity, Pralay Maiti, Sushanta Kumar Panda, Rahul Mitra, Amit Arora, Peter Samora Owuor & Chandra Sekhar Tiwary. (2023) 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones. ACS Applied Bio Materials 6:4, pages 1566-1576.
Crossref
Crossref
Ryan C. Locke, Hannah M. Zlotnick, Brendan D. Stoeckl, George W. Fryhofer, Jonathan H. Galarraga, Abhishek P. Dhand, Miltiadis H. Zgonis, James L. Carey, Jason A. Burdick & Robert L. Mauck. (2023) Linguistic Analysis Identifies Emergent Biomaterial Fabrication Trends for Orthopaedic Applications. Advanced Healthcare Materials 12:10.
Crossref
Crossref
Shathani Nkhwa, Thapelo Montshiwa, Deon de Beer, Gerrie Booysen, Cules van den Heever, Johan Els, Andre Heydenrych & Maikutlo Kebaetse. (2023) Local design and manufacturing of patient-specific implant using Anatomage Medical Design Studio software: proof of concept - Botswana’s 1st case report. 3D Printing in Medicine 9:1.
Crossref
Crossref
Periklis Godolias, Zachary L. Tataryn, Brendan J. McCullough, Amir Abdul-Jabbar, Julius R. Gerstmeyer, Jonathan Plümer, Charlotte Cibura, Christos Koutras, Hansjörg Heep, Marcel Dudda, Thomas A. Schildhauer, Jens Chapman & Rod Oskouian. (2023) Lumbosacral plexus 3D printing with dissection validation - a baseline study with regards to lateral spine surgery. Interdisciplinary Neurosurgery 31, pages 101666.
Crossref
Crossref
Tom Williamson, Stewart Ryan, Ulrich Buehner, Zac Sweeney, Dave Hill, Bill Lozanovski, Endri Kastrati, Arman Namvar, Thierry Beths, Darpan Shidid, Romane Blanchard, Kate Fox, Martin Leary, Peter Choong & Milan Brandt. (2023) Robot-assisted implantation of additively manufactured patient-specific orthopaedic implants: evaluation in a sheep model. International Journal of Computer Assisted Radiology and Surgery.
Crossref
Crossref
Ricardo Rodriguez Colon, Vasudev Vivekanand Nayak, Paulo E. L. Parente, Philipp Leucht, Nick Tovar, Charles C. Lin, Kevin Rezzadeh, Jacques H. Hacquebord, Paulo G. Coelho & Lukasz Witek. (2022) The presence of 3D printing in orthopedics: A clinical and material review. Journal of Orthopaedic Research 41:3, pages 601-613.
Crossref
Crossref
Nathaniel Toop, Joravar Dhaliwal, Andrew Grossbach, David Gibbs, Nihaal Reddy, Alexander Keister, Noah Mallory, David Xu & Stephanus Viljoen. (2023) Subsidence Rates Associated With Porous 3D-Printed Versus Solid Titanium Cages in Transforaminal Lumbar Interbody Fusion. Global Spine Journal, pages 219256822311577.
Crossref
Crossref
Luciano Vidal, Vincent Biscaccianti, Henri Fragnaud, Jean-Yves Hascoët & Vincent Crenn. (2023) Semi-automatic segmentation of pelvic bone tumors: Usability testing. Annals of 3D Printed Medicine 9, pages 100098.
Crossref
Crossref
Jaime Oraa, Nicolás Fiz, Sergio González, Maider Beitia, Xabier Sánchez, Diego Delgado & Mikel Sánchez. (2023) Derotation tibial osteotomy with custom cutting guides and custom osteosynthesis plate printed with 3D technology: Case and technical note. Annals of 3D Printed Medicine 9, pages 100093.
Crossref
Crossref
瑞潇 金. (2023) Bibliometric Analysis of Digital Orthopedic Chinese Based on CNKI Database. Advances in Clinical Medicine 13:05, pages 7887-7896.
Crossref
Crossref
James C.-H. Goh, Chengchong Ai, Xuan H. Tan & Eng H. Lee. 2023. Comprehensive Structural Integrity. Comprehensive Structural Integrity
18
34
.
A. S. Pankratov, Yu. V. Lartsev, A. A. Rubtsov, D. A. Ogurtsov, Yu. D. Kim, A. V. Shmel'kov & N. A. Knyazev. (2022) Application of 3D modeling in a personalized approach to bone osteosynthesis (A literature review). Bulletin of the Medical Institute "REAVIZ" (REHABILITATION, DOCTOR AND HEALTH) 13:1, pages 161-172.
Crossref
Crossref
Alejandro A. Espinoza Orías. 2022. Additive Manufacturing in Biomedical Applications. Additive Manufacturing in Biomedical Applications
402
415
.
Jie Wang, Yuan Chi, Baohui Yang, Qiongchi Zhang, Dong Wang, Xijing He & Haopeng Li. (2022) The application of biomaterials in osteogenesis: A bibliometric and visualized analysis. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Crossref
Vincent Biscaccianti, Henri Fragnaud, Jean-Yves Hascoët, Vincent Crenn & Luciano Vidal. (2022) Digital chain for pelvic tumor resection with 3D-printed surgical cutting guides. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Crossref
Tobias Dust, Julian-Elias Henneberg, Konrad Mader, Matthias Krause, Maximilian Hartel, Johannes Keller & Karl-Heinz Frosch. (2022) 3-D-Druck-gestützte Frakturversorgung in der Unfallchirurgie und Orthopädie. OP-JOURNAL 38:02, pages 88-95.
Crossref
Crossref
Shenglin Xu, Zehao Guo, Qiling Shen, Yongjun Peng, Jian Li, Sheng Li, Peng He, Zheng Jiang, Yukang Que, Kun Cao, Bo Hu & Yong Hu. (2022) Reconstruction of Tumor-Induced Pelvic Defects With Customized, Three-Dimensional Printed Prostheses. Frontiers in Oncology 12.
Crossref
Crossref
Rati Verma, Jitendra Kumar, Nishant Kumar Singh, Sanjay Kumar Rai, Kuldeep K. Saxena & Jinyang Xu. (2022) Design and Analysis of Biomedical Scaffolds Using TPMS-Based Porous Structures Inspired from Additive Manufacturing. Coatings 12:6, pages 839.
Crossref
Crossref
T. Thygesen, C. Slots, M.B. Jensen, N. Ditzel, M. Kassem, L. Langhorn & M.Ø. Andersen. (2022) Comparison of off-the-shelf β-tricalcium phosphate implants with novel resorbable 3D printed implants in mandible ramus of pigs. Bone 159, pages 116370.
Crossref
Crossref
Mohamed Bouabdellah, Mohamed Bensalah, Chrif Kamoun, Mehdi Bellil, Mondher Kooli & Khaled Hadhri. (2022) Advantages of three-dimensional printing in the management of acetabular fracture fixed by the Kocher-Langenbeck approach: randomised controlled trial. International Orthopaedics 46:5, pages 1155-1163.
Crossref
Crossref
Lalit Kumar, Abid Haleem & Mohd. Javaid. (2022) Systematic Development in Medical by Using 3D Printing Technology: A Brief Review. Journal of Industrial Integration and Management.
Crossref
Crossref
Maximilian Küffer, Dieter Drescher & Kathrin Becker. (2022) Application of the Digital Workflow in Orofacial Orthopedics and Orthodontics: Printed Appliances with Skeletal Anchorage. Applied Sciences 12:8, pages 3820.
Crossref
Crossref
Mengsuo Cui, Nan Hu, Dongyang Fang, Haowei Sun, Hao Pan & Weisan Pan. (2022) Fabrication and evaluation of customized implantable drug delivery system for orthopedic therapy based on 3D printing technologies. International Journal of Pharmaceutics 618, pages 121679.
Crossref
Crossref
Xiao Sheng, Ao Wang, Zhonghan Wang, He Liu, Jincheng Wang & Chen Li. (2022) Advanced Surface Modification for 3D-Printed Titanium Alloy Implant Interface Functionalization. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Crossref
Andrew J. Baines, Ata Babazadeh‐Naseri, Nicholas J. Dunbar, Valerae O. Lewis & Benjamin J. Fregly. (2021) Bilateral asymmetry of bone density adjacent to pelvic sarcomas: A retrospective study using computed tomography. Journal of Orthopaedic Research 40:3, pages 644-653.
Crossref
Crossref
Binglong Li, Meng Zhang, Qunshan Lu, Baoqing Zhang, Zhuang Miao, Lei Li, Tong Zheng & Peilai Liu. (2022) Application and Development of Modern 3D Printing Technology in the Field of Orthopedics. BioMed Research International 2022, pages 1-15.
Crossref
Crossref
Sven Goetstouwers, Dagmar Kempink, Bertram The, Denise Eygendaal, Bart van Oirschot & Christiaan JA van Bergen. (2022) Three-dimensional printing in paediatric orthopaedic surgery. World Journal of Orthopedics 13:1, pages 1-10.
Crossref
Crossref
Parastoo Memarian, Elham Pishavar, Federica Zanotti, Martina Trentini, Francesca Camponogara, Elisa Soliani, Paolo Gargiulo, Maurizio Isola & Barbara Zavan. (2022) Active Materials for 3D Printing in Small Animals: Current Modalities and Future Directions for Orthopedic Applications. International Journal of Molecular Sciences 23:3, pages 1045.
Crossref
Crossref
Dominika Grygier, Maciej Kujawa & Piotr Kowalewski. (2022) Deposition of Biocompatible Polymers by 3D Printing (FDM) on Titanium Alloy. Polymers 14:2, pages 235.
Crossref
Crossref
Massimiliano MOSCA, Emanuele VOCALE, Marco DI PONTE, Silvio CARAVELLI & Stefano ZAFFAGNINI. (2022) Custom-made implants in ankle bone loss: from total ankle replacement to reconstruction-arthrodesis. Minerva Orthopedics 72:6.
Crossref
Crossref
运 时. (2022) Clinical Application Status and Progress of 3D Printing Medical PEEK. Hans Journal of Biomedicine 12:03, pages 193-200.
Crossref
Crossref
Yusuf Izci. 2022. Biotechnology in Healthcare, Volume 1. Biotechnology in Healthcare, Volume 1
27
39
.
Ludovica Cacopardo. 2022. Human Orthopaedic Biomechanics. Human Orthopaedic Biomechanics
341
359
.
Lamis R. Darwish, Ahmed Al-Qady, Mohamed T. El-Wakad, Mahmoud M. Farag & Rania R. Darwish. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers
871
901
.
Ujwal Sontakke & Santosh Jaju. 2022. Smart Technologies for Energy, Environment and Sustainable Development, Vol 2. Smart Technologies for Energy, Environment and Sustainable Development, Vol 2
371
381
.
Simone Di Bella & Rosalia Mineo. 2022. 3D Printing in Bone Surgery. 3D Printing in Bone Surgery
39
51
.
Maurizio Scorianz, Lorenzo Guariento & Domenico Andrea Campanacci. 2022. 3D Printing in Bone Surgery. 3D Printing in Bone Surgery
25
37
.
Roberto Biagini, Alessandra Scotto di Uccio, Dario Attala & Barbara Rossi. 2022. 3D Printing in Bone Surgery. 3D Printing in Bone Surgery
165
174
.
Riccardo Sala, Stefano Regondi & Raffaele Pugliese. (2021) Design Data and Finite Element Analysis of 3D Printed Poly(ε-Caprolactone)-Based Lattice Scaffolds: Influence of Type of Unit Cell, Porosity, and Nozzle Diameter on the Mechanical Behavior. Eng 3:1, pages 9-23.
Crossref
Crossref
Po-Kuei Wu, Cheng-Wei Lee, Wei-Hsiang Sun & Chun-Li Lin. (2021) Biomechanical Analysis and Design Method for Patient-Specific Reconstructive Implants for Large Bone Defects of the Distal Lateral Femur. Biosensors 12:1, pages 4.
Crossref
Crossref
Vamiq M. Mustahsan, Amith Anugu, David E. Komatsu, Imin Kao & Srinivas Pentyala. (2021) Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide. Bioengineering 8:12, pages 199.
Crossref
Crossref
Yifan Zhang, Karan Gulati, Ze Li, Ping Di & Yan Liu. (2021) Dental Implant Nano-Engineering: Advances, Limitations and Future Directions. Nanomaterials 11:10, pages 2489.
Crossref
Crossref
Lorenzo ANDREANI, Edoardo IPPONI, Elisabetta NERI & Rodolfo CAPANNA. (2021) 3D printing in orthopedic oncology surgery. Minerva Orthopedics 72:4.
Crossref
Crossref
Michał Smoczok, Krzysztof Starszak & Weronika Starszak. (2021) 3D Printing as a Significant Achievement for Application in Posttraumatic Surgeries - A Literature Review. Current Medical Imaging Formerly Current Medical Imaging Reviews 17:7, pages 814-819.
Crossref
Crossref
Jaime Oraa, Maider Beitia, Nicolás Fiz, Sergio González, Xabier Sánchez, Diego Delgado & Mikel Sánchez. (2021) Custom 3D-Printed Cutting Guides for Femoral Osteotomy in Rotational Malalignment Due to Diaphyseal Fractures: Surgical Technique and Case Series. Journal of Clinical Medicine 10:15, pages 3366.
Crossref
Crossref
Martin Schulze, Georg Gosheger, Sebastian Bockholt, Marieke De Vaal, Tymo Budny, Max Tönnemann, Jan Pützler, Albert Schulze Bövingloh, Robert Rischen, Vincent Hofbauer, Timo Lübben, Niklas Deventer & Helmut Ahrens. (2021) Complex Bone Tumors of the Trunk—The Role of 3D Printing and Navigation in Tumor Orthopedics: A Case Series and Review of the Literature. Journal of Personalized Medicine 11:6, pages 517.
Crossref
Crossref
Tajrian Amin, William Parr & Ralph Mobbs. (2021) Opinion Piece: Patient-Specific Implants May Be the Next Big Thing in Spinal Surgery. Journal of Personalized Medicine 11:6, pages 498.
Crossref
Crossref
Mohammad Reza Maydanshahi, Ara Nazarian, Denise Eygendaal, Mohammad Hossein Ebrahimzadeh, Amir Reza Kachooei & Seyed Ali Mousavi Shaegh. (2021) 3D printing-assisted fabrication of a patient-specific antibacterial radial head prosthesis with high periprosthetic bone preservation. Biomedical Materials 16:3, pages 035027.
Crossref
Crossref
Marijana Šimić Jovičić, Filip Vuletić, Tomislav Ribičić, Sven Šimunić, Tadija Petrović & Robert Kolundžić. (2020) Implementation of the three-dimensional printing technology in treatment of bone tumours: a case series. International Orthopaedics 45:4, pages 1079-1085.
Crossref
Crossref
Flaviu Moldovan, Adrian Gligor & Tiberiu Bataga. (2021) Structured Integration and Alignment Algorithm: A Tool for Personalized Surgical Treatment of Tibial Plateau Fractures. Journal of Personalized Medicine 11:3, pages 190.
Crossref
Crossref
Marcus J. Brookes, Corey D. Chan, Bence Baljer, Sachin Wimalagunaratna, Timothy P. Crowley, Maniram Ragbir, Alistair Irwin, Zakareya Gamie, Thomas Beckingsale, Kanishka M. Ghosh & Kenneth S. Rankin. (2021) Surgical Advances in Osteosarcoma. Cancers 13:3, pages 388.
Crossref
Crossref
Philipp Honigmann, Neha Sharma, Ralf Schumacher, Jasmine Rueegg, Mathias Haefeli & Florian Thieringer. (2021) In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial. BioMed Research International 2021, pages 1-7.
Crossref
Crossref
Kaitlyn Chua, Irfaan Khan, Raoul Malhotra & Donghui Zhu. (2021) Additive manufacturing and 3D printing of metallic biomaterials. Engineered Regeneration 2, pages 288-299.
Crossref
Crossref
Joshua V. Chen, Kara S. Tanaka, Alan B. C. Dang & Alexis Dang. (2020) Identifying a commercially-available 3D printing process that minimizes model distortion after annealing and autoclaving and the effect of steam sterilization on mechanical strength. 3D Printing in Medicine 6:1.
Crossref
Crossref
Umesh Persad & Marlon Mencia. (2020) The value of 3D Printing in Orthopaedics. Caribbean Medical Journal.
Crossref
Crossref
Silvia Baiguera, Costantino Del Gaudio, Felicia Carotenuto, Paolo Di Nardo & Laura Teodori. (2020) Information-Driven Design as a Potential Approach for 3D Printing of Skeletal Muscle Biomimetic Scaffolds. Nanomaterials 10:10, pages 1986.
Crossref
Crossref
Hee-Ryung Lee, Gareeballah Osman Adam, Dong Kwon Yang, Tsendsuren Tungalag, Sei-Jin Lee, Jin-Shang Kim, Hyung-Sub Kang, Shang-Jin Kim & Nam Soo Kim. (2020) An Easy and Economical Way to Produce a Three-Dimensional Bone Phantom in a Dog with Antebrachial Deformities. Animals 10:9, pages 1445.
Crossref
Crossref
E. I. Solod, A. F. Lazarev, R. A. Petrovskiy, M. A. Abdulkhabirov & Y. M. Alsmadi. (2020) Treatment of Pelvic Ring Injury with 3D Printed Patient-Specific Implant: Case Report. Traumatology and Orthopedics of Russia 26:2, pages 91-97.
Crossref
Crossref
Sheng Shen, PeiZhao Wang, XiaoYong Li, Xu Han & HongLue Tan. (2020) Pre-operative simulation using a three-dimensional printing model for surgical treatment of old and complex tibial plateau fractures. Scientific Reports 10:1.
Crossref
Crossref
Mateusz C. Florkow, Frank Zijlstra, Koen Willemsen, Matteo Maspero, Cornelis A. T. Berg, Linda G. W. Kerkmeijer, René M. Castelein, Harrie Weinans, Max A. Viergever, Marijn Stralen & Peter R. Seevinck. (2019) Deep learning–based MR‐to‐CT synthesis: The influence of varying gradient echo–based MR images as input channels. Magnetic Resonance in Medicine 83:4, pages 1429-1441.
Crossref
Crossref
S.V. KAZUMYAN, I.A. DEGTEV, V.V. BORISOV & K.A. ERSHOV. (2020) VIRTUAL TECHNOLOGIES IN DENTISTRY. AVICENNA BULLETIN 22:4, pages 606-612.
Crossref
Crossref
Emilio A. Ramírez, Paulina Arnés Urgellés, Galo A. Durazno, Fausto A. Maldonado, Jorge L. Amaya & Carlos G. Helguero. (2020) Positioning assessment of surgical cutting guides for osteosarcoma resection utilizing 3D scanning technology. Procedia CIRP 89, pages 176-181.
Crossref
Crossref
Leonardo Frizziero, Alfredo Liverani, Giampiero Donnici, Francesco Osti, Marco Neri, Elena Maredi, Giovanni Trisolino & Stefano Stilli. (2019) New Methodology for Diagnosis of Orthopedic Diseases through Additive Manufacturing Models. Symmetry 11:4, pages 542.
Crossref
Crossref
Anna Aimar, Augusto Palermo & Bernardo Innocenti. (2019) The Role of 3D Printing in Medical Applications: A State of the Art. Journal of Healthcare Engineering 2019, pages 1-10.
Crossref
Crossref
Mohd. Javaid & Abid Haleem. (2019) Current status and challenges of Additive manufacturing in orthopaedics: An overview. Journal of Clinical Orthopaedics and Trauma 10:2, pages 380-386.
Crossref
Crossref
Zuhao Li, Chenyu Wang, Chen Li, Zhonghan Wang, Fan Yang, He Liu, Yanguo Qin & Jincheng Wang. (2018) What we have achieved in the design of 3D printed metal implants for application in orthopedics? Personal experience and review. Rapid Prototyping Journal 24:8, pages 1365-1379.
Crossref
Crossref
Trina Majumdar, Neil Eisenstein, Jess E. Frith, Sophie C. Cox & Nick Birbilis. (2018) Additive Manufacturing of Titanium Alloys for Orthopedic Applications: A Materials Science Viewpoint. Advanced Engineering Materials 20:9, pages 1800172.
Crossref
Crossref
Vishaal Nanik Thadani, Muhammad Jahangir Riaz & Gurpal Singh. (2018) The evolution of three-dimensional technology in musculoskeletal oncology. Journal of Clinical Orthopaedics and Trauma 9:3, pages 269-274.
Crossref
Crossref
Mohd. Javaid & Abid Haleem. (2018) Additive manufacturing applications in orthopaedics: A review. Journal of Clinical Orthopaedics and Trauma 9:3, pages 202-206.
Crossref
Crossref
Kwok-Chuen Wong & Peter Scheinemann. (2018) Additive manufactured metallic implants for orthopaedic applications用于矫形外科的增材制造金属植入物. Science China Materials 61:4, pages 440-454.
Crossref
Crossref
Philipp Honigmann, Neha Sharma, Brando Okolo, Uwe Popp, Bilal Msallem & Florian M. Thieringer. (2018) Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application. BioMed Research International 2018, pages 1-8.
Crossref
Crossref
Chaohua Gao, Chenyu Wang, Hui Jin, Zhonghan Wang, Zuhao Li, Chenyu Shi, Yi Leng, Fan Yang, He Liu & Jincheng Wang. (2018) Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics. RSC Advances 8:44, pages 25210-25227.
Crossref
Crossref
Kwok Chuen Wong. 2018. Computer Assisted Orthopaedic Surgery for Hip and Knee. Computer Assisted Orthopaedic Surgery for Hip and Knee
157
169
.