Luis Ccorimanya, Modar Hassan, Reiko Watanabe, Tomoyuki Ueno, Yasushi Hada & Kenji Suzuki. (2023) A Personalized 3D-Printed Hand Prosthesis for Early Intervention in Children With Congenital Below-Elbow Deficiency: User-Centered Design Case Study. IEEE Access 11, pages 50235-50251.
Crossref
Vikranth H. Nagaraja, Jhonatan da Ponte Lopes & Jeroen H. M. Bergmann. (2022) Reimagining Prosthetic Control: A Novel Body-Powered Prosthetic System for Simultaneous Control and Actuation. Prosthesis 4:3, pages 394-413.
Crossref
Dario Farina, Ivan Vujaklija, Rickard Brånemark, Anthony M. J. Bull, Hans Dietl, Bernhard Graimann, Levi J. Hargrove, Klaus-Peter Hoffmann, He Huang, Thorvaldur Ingvarsson, Hilmar Bragi Janusson, Kristleifur Kristjánsson, Todd Kuiken, Silvestro Micera, Thomas Stieglitz, Agnes Sturma, Dustin Tyler, Richard F. ff. Weir & Oskar C. Aszmann. (2021) Toward higher-performance bionic limbs for wider clinical use. Nature Biomedical Engineering 7:4, pages 473-485.
Crossref
Just L. Herder. 2020. Encyclopedia of Robotics. Encyclopedia of Robotics
1
10
.
Luis Ccorimanya, Reiko Watanabe, Modar Hassan, Yasushi Hada & Kenji Suzuki. (2019) Design of a myoelectric 3D-printed prosthesis for a child with upper limb congenital amputation. Design of a myoelectric 3D-printed prosthesis for a child with upper limb congenital amputation.
Job Neven, Mohamed Baioumy, Wouter Wolfslag & Martijn Wisse. (2019) Design and Evaluation of an Energy-Saving Drive for a Versatile Robotic Gripper. Design and Evaluation of an Energy-Saving Drive for a Versatile Robotic Gripper.
Sorin Curea, Oana Geman, Iuliana Chiuchisan, Valentina Balas, Guojun Wang & Muhammad Arif. 2019. Smart City and Informatization. Smart City and Informatization
520
530
.
Gerwin Smit, Dick H. Plettenburg & Frans C. T. van der Helm. (2015) The Lightweight Delft Cylinder Hand: First Multi-Articulating Hand That Meets the Basic User Requirements. IEEE Transactions on Neural Systems and Rehabilitation Engineering 23:3, pages 431-440.
Crossref
Gerwin Smit, Dick Plettenburg & Frans Van der Helm. (2014) A mechanism to compensate undesired stiffness in joints of prosthetic hands. Prosthetics & Orthotics International 38:2, pages 96-102.
Crossref
Adriano O. Andrade, Adriano A. Pereira, Steffen Walter, Rosimary Almeida, Rui Loureiro, Diego Compagna & Peter J. Kyberd. (2014) Bridging the gap between robotic technology and health care. Biomedical Signal Processing and Control 10, pages 65-78.
Crossref
Jingzhou Yang, Karim Abdel‐Malek & Jason Potratz. (2005) Design and prototyping of an active hand prosthetic device. Industrial Robot: An International Journal 32:1, pages 71-78.
Crossref
Jingzhou Yang, Esteban Peña Pitarch, Karim Abdel-Malek, Amos Patrick & Lars Lindkvist. (2004) A multi-fingered hand prosthesis. Mechanism and Machine Theory 39:6, pages 555-581.
Crossref
H. Smart. 2004. Powered Upper Limb Prostheses. Powered Upper Limb Prostheses
191
204
.
Jack M. Winters, Corinna Lathan, Sujat Sukthankar, Tanja M. Pieters & Tariq Rahman. 2000. Biomechanics and Neural Control of Posture and Movement. Biomechanics and Neural Control of Posture and Movement
493
515
.
Just L. Herder. (1998) Design of spring force compensation systems. Mechanism and Machine Theory 33:1-2, pages 151-161.
Crossref
S. Landsberger, J. Shaperman, Y. Setoguchi, R. Fite, A. Lin, V. Vargas & D. McNeal. (1996) Child prosthetic hand design: no small challenge. Child prosthetic hand design: no small challenge.