Citations (59)
Keep up to date with the latest research on this topic with citation updates for this article.
Articles from other publishers (59)
Mazen A. Attia, Mohamed Radwan, Liam Blunt, Paul Bills, Ahmed Tawfik & Ahmed M. Arafa. (2023) Effect of different sintering protocols on the fracture strength of 3-unit monolithic gradient zirconia fixed partial dentures: An in vitro study. The Journal of Prosthetic Dentistry 130:6, pages 908.e1-908.e8.
Crossref
Crossref
Song Yang, Qi Li, Sheng-yuan Chen & Hao Yu. (2023) Effect of multiple firings on the marginal fit of monolithic zirconia crowns: An in vitro study. The Journal of Prosthetic Dentistry 130:6, pages 897-901.
Crossref
Crossref
Tadej Mirt, Nikhil Bhootpur, Tine Malgaj, Mutlu Özcan, Peter Jevnikar & Andraž Kocjan. (2023) Sintering Strategies for Dental Zirconia Ceramics: Slow Versus Rapid?. Current Oral Health Reports 10:4, pages 233-242.
Crossref
Crossref
Xenia Antón, Anja Liebermann, Rüdiger Hampe, Tim Joda & Bogna Stawarczyk. (2023) Impact of high-speed sintering and choice of preshaded monochrome or multilayered blanks on fatigue behavior of 4 mol% yttria-stabilized tetragonal zirconia polycrystal. The Journal of Prosthetic Dentistry 130:4, pages 639-645.
Crossref
Crossref
Woo-Chang Kwon & Mi-Gyoung Park. (2023) Effect of speed sintering on flexural strength, density, and linear shrinkage of monolithic zirconia. Korean Journal of Dental Materials 50:3, pages 157-168.
Crossref
Crossref
Perihan Oyar & Rukiye Durkan. (2023) The effects of heating rate and sintering time on the biaxial flexural strength of monolithic zirconia ceramics. Biomedical Engineering / Biomedizinische Technik 68:4, pages 437-443.
Crossref
Crossref
Hee-Seon Lee, Hyunseok Ko, Kyuyoung Heo, Heesoo Lee & Hyung Mi Lim. (2023) Dispersion control via crystal-phase modulation of yttrium-doped ZrO2 nanoparticle sol. Colloids and Surfaces A: Physicochemical and Engineering Aspects 670, pages 131476.
Crossref
Crossref
Suchada Kongkiatkamon, Dinesh Rokaya, Santiphab Kengtanyakich & Chaimongkon Peampring. (2023) Current classification of zirconia in dentistry: an updated review. PeerJ 11, pages e15669.
Crossref
Crossref
Pithiwat Uasuwan, Niwut Juntavee & Apa Juntavee. (2023) Flexural strength of high yttrium oxide‐doped monochrome and multilayered fully stabilized zirconia upon various sintered cooling rates. Journal of Prosthodontics 32:6.
Crossref
Crossref
Kerolos Salah, Ashraf Hussein Sherif, Mona H. Mandour & Shereen Ahmed Nossair. (2023) Optical effect of rapid sintering protocols on different types of zirconia. The Journal of Prosthetic Dentistry.
Crossref
Crossref
Camilla Johansson, Sebastian Franco Tabares, Christel Larsson & Evaggelia Papia. (2023) Laboratory, Clinical-Related Processing and Time-Related Factors’ Effect on Properties of High Translucent Zirconium Dioxide Ceramics Intended for Monolithic Restorations A Systematic Review. Ceramics 6:1, pages 734-797.
Crossref
Crossref
Julia Lubauer, Fernanda Haverroth Schuenemann, Renan Belli & Ulrich Lohbauer. (2023) Speed-sintering and the mechanical properties of 3–5 mol% Y2O3-stabilized zirconias. Odontology.
Crossref
Crossref
Kazumichi Nonaka, Nobuyuki Takeuchi, Tatsuro Morita & Giuseppe Pezzotti. (2023) Evaluation of the effect of high-speed sintering on the mechanical and crystallographic properties of dental zirconia sintered bodies. Journal of the European Ceramic Society 43:2, pages 510-520.
Crossref
Crossref
Min Yan, Shinn-Jyh Ding, Cheng-Wei Lin, Cian-Li Wei, Yi-Wen Huang & Chun-Chuan Yang. (2023) Aging resistance of highly translucent zirconia ceramics with rapid sintering. Journal of Oral Science 65:1, pages 15-19.
Crossref
Crossref
V. V. Kulyk, Z. A. Duriagina, B. D. Vasyliv, V. I. Vavrukh, T. M. Kovbasiuk, P. Ya. Lyutyy & V. V. Vira. 2023. Nanoelectronics, Nanooptics, Nanochemistry and Nanobiotechnology, and Their Applications. Nanoelectronics, Nanooptics, Nanochemistry and Nanobiotechnology, and Their Applications
263
279
.
M. Kannan, Satyendra Singh & Raja Ram Prasad. (2022) The Effect of Processing Parameters on the Mechanical Properties of Calcia-Stabilized Zirconia (CSZ) for Dental Use. Coatings 13:1, pages 75.
Crossref
Crossref
Shoko Miura, Akikazu Shinya, Hiroyasu Koizumi & Masanori Fujisawa. (2022) Effect of speed sintering of monolithic zirconia with different yttria contents on color and crystal phase. European Journal of Oral Sciences 130:6.
Crossref
Crossref
Abdelrahman Badarneh, Joanne Jung Eun Choi, Karl Lyons, John Neil Waddell & Kai Chun Li. (2022) Wear Behaviour of Monolithic Zirconia Against Human Enamel – A Literature Review. Biotribology 32, pages 100224.
Crossref
Crossref
Yunus Emre Ozden, Mustafa Baris Guncu, Guliz Aktas & Senay Canay. (2022) Effect of sintering time on the marginal and internal fit of monolithic zirconia crowns containing 3–4 mol% Y2O3. BMC Oral Health 22:1.
Crossref
Crossref
Nadin Al-Haj Husain, Mutlu Özcan, Nataliya Dydyk & Tim Joda. (2022) Conventional, Speed Sintering and High-Speed Sintering of Zirconia: A Systematic Review of the Current Status of Applications in Dentistry with a Focus on Precision, Mechanical and Optical Parameters. Journal of Clinical Medicine 11:16, pages 4892.
Crossref
Crossref
Suchada Kongkiatkamon & Chaimongkon Peampring. (2022) Effect of Speed Sintering on Low Temperature Degradation and Biaxial Flexural Strength of 5Y-TZP Zirconia. Molecules 27:16, pages 5272.
Crossref
Crossref
Volodymyr Kulyk, Zoia Duriagina, Andrii Kostryzhev, Bogdan Vasyliv, Valentyna Vavrukh & Olexandra Marenych. (2022) The Effect of Yttria Content on Microstructure, Strength, and Fracture Behavior of Yttria-Stabilized Zirconia. Materials 15:15, pages 5212.
Crossref
Crossref
Felicitas Mayinger, Ramona Buser, Maximilian Laier, Lisa Marie Schönhoff, Matthias Kelch, Rüdiger Hampe & Bogna Stawarczyk. (2022) Impact of the material and sintering protocol, layer thickness, and thermomechanical aging on the two-body wear and fracture load of 4Y-TZP crowns. Clinical Oral Investigations 26:11, pages 6617-6628.
Crossref
Crossref
Chek Hai Lim, Sonaj Vardhaman, Niyati Reddy & Yu Zhang. (2022) Composition, processing, and properties of biphasic zirconia bioceramics: Relationship to competing strength and optical properties. Ceramics International 48:12, pages 17095-17103.
Crossref
Crossref
Tuba Yılmaz Savaş & Ceyda Akın. (2022) Effects of sintering protocol and dipping time on the optical properties of monolithic zirconia. The Journal of Prosthetic Dentistry 127:5, pages 801.e1-801.e8.
Crossref
Crossref
Abdelrahman Badarneh, Joanne Jung Eun Choi, Karl Lyons, Gemma Porter, Neil Waddell & Kai Chun Li. (2022) The effect of aging on the wear performance of monolithic zirconia. Dental Materials 38:5, pages e136-e146.
Crossref
Crossref
Hengyi Liu, Masanao Inokoshi, Kosuke Nozaki, Makoto Shimizubata, Hiroto Nakai, Thaw Di Cho Too & Shunsuke Minakuchi. (2022) Influence of high-speed sintering protocols on translucency, mechanical properties, microstructure, crystallography, and low-temperature degradation of highly translucent zirconia. Dental Materials 38:2, pages 451-468.
Crossref
Crossref
María Fernanda Solá-Ruíz, Aitana Rico-Coderch, José María Montiel-Company, Carla Fons-Badal, Blanca Verdejo-Solá & Rubén Agustín-Panadero. (2022) Influence of the chemical composition of monolithic zirconia on its optical and mechanical properties. Systematic review and meta-regression. Journal of Prosthodontic Research 66:2, pages 193-207.
Crossref
Crossref
Masanao Inokoshi & Shunsuke Minakuchi. (2022) Latest evidence of dental zirconia ceramics from material scienceジルコニア:マテリアルサイエンスから見た最新のエビデンス. Annals of Japan Prosthodontic Society 14:2, pages 124-130.
Crossref
Crossref
E.E. Dyakonenko, D.A. Sakhabieva, I.B. Axelrod & I.Yu. Lebedenko. (2022) Comparative evaluation of traditional and speed sintering of dental ceramics based on zirconium dioxide. Stomatologiya 101:2, pages 106.
Crossref
Crossref
Omar Al-Surkhi & Zeina Hamad. (2022) Influence of firing temperature and duration on the hardness of dental zirconia for optimum selection of sintering conditions. Journal of Applied Biomaterials & Functional Materials 20, pages 228080002211142.
Crossref
Crossref
Martin Rosentritt, Verena Preis, Alois Schmid & Thomas Strasser. (2022) Multilayer zirconia: Influence of positioning within blank and sintering conditions on the in vitro performance of 3-unit fixed partial dentures. The Journal of Prosthetic Dentistry 127:1, pages 141-145.
Crossref
Crossref
Perihan Oyar, Rukiye Durkan & Gonca Deste. (2021) Effects of sintering time and hydrothermal aging on the mechanical properties of monolithic zirconia ceramic systems. The Journal of Prosthetic Dentistry 126:5, pages 688-691.
Crossref
Crossref
Artyom Plyushch, Nerijus Mačiulis, Aliaksei Sokal, Robertas Grigalaitis, Jan Macutkevič, Alexander Kudlash, Natalia Apanasevich, Konstantin Lapko, Algirdas Selskis, Sergey A. Maksimenko, Polina Kuzhir & Juras Banys. (2021) 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 Phosphate Composites: Dielectric and Ferroelectric Properties. Materials 14:17, pages 5065.
Crossref
Crossref
Hasan Murat AYDOĞDU & Murat ESKİTAŞÇIOĞLU. (2021) A Study on Dimensional and Marginal Gap Changes Through Application of Different Sintering Methods and Veneer Firings on Zirconia CrownsZirkonya Kronlarda Farklı Sinter Prosedürleri ve Veneer Pişirmeleri ile Birlikte Görülen Boyutsal ve Marjinal Aralık Değişimleri. Selcuk Dental Journal 8:2, pages 522-529.
Crossref
Crossref
Marcela F. Catramby, Accacio L. do Vale, Heraldo E.S. dos Santos & Carlos N. Elias. (2021) Effect of sintering process on microstructure, 4-point flexural strength, and grain size of yttria-stabilized tetragonal zirconia polycrystal for use in monolithic dental restorations. The Journal of Prosthetic Dentistry 125:5, pages 824.e1-824.e8.
Crossref
Crossref
Arife Yurdakul. (2021) Production and Characterization of Ceramic Bushings from Alumina-Toughened Yttrium-Stabilized Tetragonal Zirconia Composites for Projection Welding Applications. Arabian Journal for Science and Engineering 46:3, pages 2579-2588.
Crossref
Crossref
Simone Sprio, Anna Tampieri, Massimiliano Dapporto, Michele Iafisco & Monica Montesi. 2021. Encyclopedia of Materials: Technical Ceramics and Glasses. Encyclopedia of Materials: Technical Ceramics and Glasses
601
613
.
Walaa Magdy Ahmed, Batoul Shariati, Arwa Z. Gazzaz, Mohammed E. Sayed & Ricardo M. Carvalho. (2020)
Fit of
tooth‐supported
zirconia single crowns—A systematic review of the literature
. Clinical and Experimental Dental Research 6:6, pages 700-716.
Crossref
Crossref
Marianna Michailova, Adham Elsayed, Gertrud Fabel, Daniel Edelhoff, Isabela-Maria Zylla & Bogna Stawarczyk. (2020) Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering. Journal of the Mechanical Behavior of Biomedical Materials 111, pages 103977.
Crossref
Crossref
Marek Vojtko, Viktor Puchy, Erika Múdra, Ondrej Milkovič & Alexandra Kovalčíková. (2020) Coarse-grain CeO2 doped ZrO2 ceramic prepared by spark plasma sintering. Journal of the European Ceramic Society 40:14, pages 4844-4852.
Crossref
Crossref
Walaa Magdy Ahmed, Tom Troczynski, Biljana Jonoska Stojkova, Anthony P. McCullagh, Chris C. Wyatt & Ricardo Marins Carvalho. (2020) Dimensional Changes of Yttria‐stabilized Zirconia under Different Preparation Designs and Sintering Protocols. Journal of Prosthodontics 29:8, pages 699-706.
Crossref
Crossref
Niwut Juntavee & Pithiwat Uasuwan. (2020) Flexural Strength of Different Monolithic Computer-Assisted Design and Computer-Assisted Manufacturing Ceramic Materials upon Different Thermal Tempering Processes. European Journal of Dentistry 14:04, pages 566-574.
Crossref
Crossref
Ana Elisa Kauling, Jan-Frederik Güth, Kurt Erdelt, Daniel Edelhoff & Christine Keul. (2020) Influence of speed sintering on the fit and fracture strength of 3-unit monolithic zirconia fixed partial dentures. The Journal of Prosthetic Dentistry 124:3, pages 380-386.
Crossref
Crossref
Stevan M. Cokic, Jef Vleugels, Bart Van Meerbeek, Bernardo Camargo, Evita Willems, Maoyin Li & Fei Zhang. (2020) Mechanical properties, aging stability and translucency of speed-sintered zirconia for chairside restorations. Dental Materials 36:7, pages 959-972.
Crossref
Crossref
Felicitas Wiedenmann, Regina Pfefferle, Axel Reichert, Eva Jerman & Bogna Stawarczyk. (2020) Impact of high-speed sintering, layer thickness and artificial aging on the fracture load and two-body wear of zirconia crowns. Dental Materials 36:7, pages 846-853.
Crossref
Crossref
M Zimmermann, A Ender & A Mehl. (2020) Influence of CAD/CAM Fabrication and Sintering Procedures on the Fracture Load of Full-Contour Monolithic Zirconia Crowns as a Function of Material Thickness. Operative Dentistry 45:2, pages 219-226.
Crossref
Crossref
Nathaniel C. Lawson & Anvita Maharishi. (2019) Strength and translucency of zirconia after high‐speed sintering. Journal of Esthetic and Restorative Dentistry 32:2, pages 219-225.
Crossref
Crossref
Maria Kelesi, Eleana Kontonasaki, Nikolaos Kantiranis, Lambrini Papadopoulou, Triantafyllia Zorba, K M Paraskevopoulos & Petros Koidis. (2020) The effect of different aging protocols on the flexural strength and phase transformations of two monolithic zirconia ceramics. Journal of Applied Biomaterials & Functional Materials 18, pages 228080002098267.
Crossref
Crossref
Mehmet Emre Coskun & Mehmet Fehim Çelenk. (2019) Structural Alterations of Zirconia Depending on Sintering Parameters and Effects on Bond Strength After Different Surface Treatments. Cumhuriyet Dental Journal, pages 402-411.
Crossref
Crossref
Jan Ulrich Jansen, Nina Lümkemann, Inge Letz, Regina Pfefferle, Beatrice Sener & Bogna Stawarczyk. (2019) Impact of high-speed sintering on translucency, phase content, grain sizes, and flexural strength of 3Y-TZP and 4Y-TZP zirconia materials. The Journal of Prosthetic Dentistry 122:4, pages 396-403.
Crossref
Crossref
Walaa M. Ahmed, Tom Troczynski, Anthony P. McCullagh, Chris C. L. Wyatt & Ricardo M. Carvalho. (2019) The influence of altering sintering protocols on the optical and mechanical properties of zirconia: A review. Journal of Esthetic and Restorative Dentistry 31:5, pages 423-430.
Crossref
Crossref
Ling Li, Chenyang Zhao, Zhaofu Du, Yuexiu Qiu & Wenjie Si. (2019) Rapid‐sintered dental zirconia for chair‐side one‐visit application. International Journal of Applied Ceramic Technology 16:5, pages 1830-1835.
Crossref
Crossref
Mehmet COSKUN & Fatih SARI. (2019) Effects of Speed Sintering on Multilayered Monolithic Zirconia. Cumhuriyet Dental Journal 22:1, pages 31-36.
Crossref
Crossref
Walaa Magdy Ahmed, Mohamed-Nur Abdallah, Anthony P. McCullagh, Chris C.L. Wyatt, Tom Troczynski & Ricardo M. Carvalho. (2019) Marginal Discrepancies of Monolithic Zirconia Crowns: The Influence of Preparation Designs and Sintering Techniques. Journal of Prosthodontics 28:3, pages 288-298.
Crossref
Crossref
Caner Öztürk & Ersan Çelik. (2019) Influence of heating rate on the flexural strength of monolithic zirconia. The Journal of Advanced Prosthodontics 11:4, pages 202.
Crossref
Crossref
Amir Ali Reza Khaledi, Mahroo Vojdani, Mitra Farzin, Sudabeh Pirouzi & Sepideh Orandi. (2019) The Effect of Sintering Time on the Marginal Fit of Zirconia Copings. Journal of Prosthodontics 28:1, pages e285-e289.
Crossref
Crossref
Dulus Owen, James Hickey, Alexander Cusson, Oyedotun Isaac Ayeni, Jeremiah Rhoades, Yifan Deng, Yi Zhang, Linmin Wu, Hye-Yeong Park, Nishant Hawaldar, Piyush Pai Raikar, Yeon-Gil Jung & Jing Zhang. (2018) 3D printing of ceramic components using a customized 3D ceramic printer. Progress in Additive Manufacturing 3:1-2, pages 3-9.
Crossref
Crossref
Marina R. Kaizer, Petra C. Gierthmuehlen, Mateus BF dos Santos, Sergio S. Cava & Yu Zhang. (2017) Speed sintering translucent zirconia for chairside one-visit dental restorations: Optical, mechanical, and wear characteristics. Ceramics International 43:14, pages 10999-11005.
Crossref
Crossref