Effect of Swirl Strength on the Flow and Combustion Characteristics of Pulverized Biomass Flames

ABSTRACT

This article reports on the effect of swirl intensity on the flow and combustion characteristics of pulverized olive waste (OW) burning. Numerical simulations are carried out using the computational fluid dynamics (CFD) Commercial Software “Fluent ANSYS14” by choosing appropriate model parameters. The biomass furnace consists of a vertical cylinder equipped with a swirling co-flow injection burner. The particles of pulverized biomass (OW) are injected transversally into the furnace just near the co-flow exit, via four square-shaped injection nozzles. The non-premixed combustion model with mixture fraction/PDF model for turbulence-chemistry interactions is used. Standard k-ε turbulence model closure, discrete phase model (DPM) for tracking the motion of individual particle and P-1 radiation model for flame radiation inside the combustor are used in the numerical simulation. Four different swirl numbers S_n = 0.38, 0.95, 1.2 and 1.42 are used in this study in order to investigate the swirl intensity effect on the flow and combustion behavior. The results showed that the flow and the flame characteristics such as axial velocity, streamlines, gas temperature, flame length and CO₂, CO and O₂ concentrations are affected by the swirl intensity.

KEYWORDS:

• Combustion
• swirling flow
• Pulverized biomass
• CFD
• Swirl number

Additional information

Funding

The financial support provided to this project by the Region Centre Val de Loire, project code: VERA-P2 (n° 2015-00099702), is greatly appreciated.